Should what type of Module I use for Satellite Pro A100

Similar Questions

• Of memory can what type of bars I use in Satellite Pro A210-1AZ

  I just bought the satellite pro a210-1az which has 1 GB ram samsung.
  I'm tempted to increase the amount of ram and I think theres 1 free slot, my best plan would be to exactly match the installed module.

  My problem is the determination this exactly.
  I googled the numbers on the module - no luck.

  The label on the statements of the 667 mhz box, but I saw the post 5? MHz.
  I don't want to buy the wrong kind.

  Please take a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=42617&ft=m&St=3

  According to this site, the laptop would support DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM barrettes.

  I think this should help to clarify your question.

  Welcomes the boyfriend

• Maximum RAM and type for Satellite Pro A100

  Hello.

  I have already looked at my manual, but I can't get a definitive answer.

  I went to one of these computers, analysis of Web sites and it claims I have 2 SLOTS where I can put 1 GB DDR II PC2-4200 each (so 2048 MB of ram)
  (es http://www.crucial.com/store/listparts.aspx?model=Satellite%20Pro%20A100%20Seri) But according to CPU - Z, my laptop contains DDR II PC2-4300 512 MB

  But when I recorded from TOSHIBA Web site and entered the serial number of my cell phone, he told me that I had a Satellite Pro A100-196
  When I searched for Satellite Pro A100-196 on the internet, I came across a website (http://toshiba.icecat.biz/en/p/PSAACE-00E00DG3/Satellite%2520Pro%2520A100-196.htm) that says that 100-196 a module of DDR II (533 mhz) and that it can place additional modules up to 4096 MB (which means I can't that modules of RAM 2 GB each)

  So I would like to know if anyone knows the final RAM MAX (and type), I can place.

  Thank you.

  The Satellite Pro A100-196 appears to bear the 667 Mhz front bus!
  So, you can also use the modules of memory 667 Mhz (533 Mhz is also possible).

  I advise to use SODIMM 200 PIN DDR2 modules; 667 MHz (PC2-5300)

  You can upgrade the memory to 4 GB max. So it is certainly possible to use a 2 GB into a slot!

  Good bye

• Where to find bars of memory 2 GB for Satellite Pro A100

  According to the Toshiba site, the A100 has 2 memory slots for up to 2 GB per slot, but I can only find 1 GB max cards. Anyone know where I can find 2 GB cards?

  With the card, you mean the memory modules?

  You Satellite Pro A100 must be a unit of PSAACE-xxxx series because AFAIK other A100 Pro supports only 2 GB of memory.

  In any case, someone posted a useful link to the site to upgrade memory. I found this:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26257&ft=m&St=3

  I chose the ProA100-828 because I put t know what exactly your unit.
  However, there is a 2 GB module shown.

  By the way: 200 pin DDR2-533 SODIMM modules are compatible!

• Need best driver of ATI X 1600 for Satellite Pro A100-830

  Hey

  I use my Satellite Pro A100-830 (PSAACE-00W002EN) for the most part to play my games, but unfortunately I can't. It seems that Toshiba doesn't provide good enough graph-drivers because every time I play, for example: half-life 2, I get this error specefied: internal driver error in IDirect3ddevice9::present()

  I tried to reinstall my computer all with CD distribution which followed with my PC, but this work of t is not a long time. I also tried to download than the latest ATI drivers, but they can not be installed, nor OmegaDrivers (Installable but didn t work).
  I use Windows XP and I have all the updates of 'Windows Update'...
  Just when I reinstalled my computer, I downloaded all Windows, then the most recent BIOS updates, and after that, I deleted the ATI driver that was limited to the CD and installed the ATI driver 'later' of Toshibas own homepage.
  (Not only Steam-games doesn t work, almost none of my games...)

  Please help me on these "desperate times." Would be happy if you could write the answer directly to my email address:
  [email protected]

  Hello

  To be honest, you are not alone in this and many laptop users want to have better performance and play the latest games which can be played with the latest and newest materials. If you have a portable way but want to have maximum on graphics performance.

  Sorry but I think you wait a little too long. We are talking not on desktop computers and notebooks. As a player, you understand without doubt that high-performance graphic has a result a lot of heat, and it can be very dangerous for the portable equipment (placed on the square). Using the most recent and better display drivers will require you probably to a graphics card to work under pressure but the result may be overheating or even damage the material.

  Be reasonable and understand that laptops have lower graphics performance and laptop manufacturer has only one priority: to protect the equipment. Because of this there not much updated graphics card drivers.

  I don't really know what games you try to play, but I tested my old M70 (also ATI) graphics card with several games (not later) and it runs good.

  Bye and good luck!

• Where did my WLan connection part for Satellite Pro A100

  Hi all

  I recently reinstalled xp on my Satellite Pro A100 and I can not get the wireless connection works.
  He worked prior to re - install. I downloaded a bunch of driver but cannot make it work.

  any suggestions?

  THX
  Tim

  Hello

  First you should check if the WiFi network card status in Device Manager.
  You can see a Wlan card?

  If you n t see the Wlan card listed in the network adapters, it would mean the failure of the driver installation WiFi card or you have used is not compatible Wlan driver!

  I m not to mention of course that you have the card Wlan but there are only two options; It s Atheros or Intel.

  I recommend you to visit the European driver Toshiba page and download the latest Wlan driver for this device.

• WXP for Satellite Pro A100-02Y (PSAAPE) ethernet controller driver

  As Gipsyman pointed out quite rightly, I posted this twice, but since the first post, I found the driver for the mass storage device but did not find any drivers listed for for XP pro Ethernet controller, so no solution I ask the question again and please give people a chance to respond this time before closing the thread!
  No one knows how this laptop ethernet card. I'm looking for a driver for him so that it will work with Windows XP Home edition. Those listed on this site offer unique Vista based ones.

  I m wrong, but to my knowledge, the Satellite Pro A100 PSAAPE uses a chipset Intel Ekron-R (82562GZ) LAN.
  In this case you should look for in the Intel page for compatible drivers ;)

• Need drivers for Windows XP edition family 64-bit for Satellite Pro A100

  Hello

  Where can I find drivers for Windows XP 64 - bit drivers for my laptop Toshiba Satellite Pro A100 (PSAACE) series? I was looking on
  [this site | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU], but there is for the 32-bit version of Windows XP.

  Thank you

  Yes, you are directly on the European driver of Toshiba page you will find only the 32-bit drivers XP and Vista.
  It seems that the Vista 64 bit drivers are not being released especially for this series of laptop.

  But don t give up buddy;
  Several series of laptops are equipped with the same features. SO try a few only Vista 64 bit drivers from other series that supports the same devices.

  In addition, you can search on some external 3 Web sites from third parties for the Vista 64 bit drivers.
  Many manufacturers of chips provides 64-bit Vista drivers own address for specific devices.

  Good bye

• Need drivers for Satellite Pro A100

  Hello, where can I download drivers for my satellite pro A100 laptop computer (psaa3e)?

  I recommend allows you to create specific Tools & Utilities CD this option, you can find in Toshiba help protect & difficulty but the unit must be pre-installed with original recovery media.

  Another way all drivers download page and the stuff of Toshiba designed that you can find at Toshiba. The link is displayed by the previous user.

• Need Product Code for (Satellite Pro A100-722) AC adapter

  I am looking for the product number for the adapter from the model below so that I can buy the correct replacement AC adapter.
  Satellite Pro A100-722
  Part number: PSAAPE-00D006EN

  Help would be great.

  This adapter must be compatible:
  * PA2521U/E-2ACA * 15V - 6A - 90W

  I put t know where you come, but you can order this feature of the ASP in your country!

  See you soon

• How to use the Satellite Pro A100 speakers as a hands-free SmartPhone device?

  I have a your Satellite Pro A100 (PSAAC) and a T-Mobile SDA Smartphone. I would use my laptop speakers and microphone to talk to my cell phone hands-free. I use Vista.

  Are you sure that something like this is possible?

• Need drivers of Windows XP Home for Satellite Pro A100

  Well, the subject pretty much says it all, I need to get drivers for my "Satellite Pro A100 psaape" meaning I'll install windows XP instead of vista. Only problem is that I can't find the drivers. I looked on the Toshiba site but my partnumber (psaape) does not exist, a similar number only. So how to find the right drivers?

  Thank you

  Hello

  I checked the Toshiba download page and you can find the drivers of Windows XP Home for PSAAP and it's your model of laptop.

• Should what kind of RAM I use for A50 101?

  What type of ram can I use for A50 101

  Hello

  Check out this site. You will find compatible memory modules:

  http://www.MemoryX.NET/tosaa5me12.html

  Best regards

• Should what type of disc I use to copy pictures on a disc?

  Original title: what type of disc should I use to copy pictures on a disc. I tried memorex cd - r 40 x and also cd - r 52 x, and they do not work

  copy pictures to a disc

  Hi stv2741,

  1. you use any DVD burning software?

  You can use any type of recordable disc to burn images. You can check the following links for more information:

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn pictures or videos to a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Should what type of destination I use

  We have a client who's concerned about damage to the physical system during shipping. As a precaution, I was invited to P2V server for import into their ESX 3.5 environment.

  I got several different answers support so, I wanted to try here. I'll be the choices of others, but what type of machine should I choose if the image will be imported into ESX 3.5. The choices are:

  • Workstation 6.x, VMware Fusion 1.x, 2.x, 2.x ACE player

  • Workstation 5.x, VMware Sercer 1.x, player 1.x

  • Workstation 4.5 x, AX 1.x, GSX Server 3.X

  I think I got 3 different answers of 3 different engineers?

  No one who will work - the closest match is compatible Workstation 5

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html