Similar Questions

• I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What is the EULA

  I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What does the EULA say?

  A single user license allows you to have two machines with enabled facilities.

  Licensing and terms of use | Adobe

• Apple Airport express records is not on the wifi network

  HI, I bought an Apple Airport Extreme new several months and I haven't connected my Airport Express so far. For some reason, the Airport Express is same does not record on the network. I unplugged for several minutes and plugged in. I don't know if there may be a software update that I missed?  Someone had this problem?  I would be grateful for any help. Thank you! Chuck

  If you have not reset the Terminal AirPort Express to settings by default and then set up again to extend the network provided by the AirPort Extreme... so now may be a good time to do this.

  As it is, the Express is not "appear" on your network because it has not been provided with the settings to do.

  If you need some advice on how to get the Express running... we will need a little more information from you as follows:

  (1) your AirPort Express Terminal has two Ethernet ports... or... does he have one?  If is has one, we need to model on the side of the unit number. It starts with an "A" followed four digits.  For example... A1264.

  (2) AirPort Express Terminal will connect to the network using a permanent connection to the Ethernet cable wired to AirPort Extreme... or... the Express will connect wireless?

  (3) what device you use to configure the AirPort Express Terminal?

  (4) If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

• This product key cannot be used to extend the trial for Microsoft Visual Basic

  I need a product key to extend my evaluation period for visual basic. I went through the motions and picked up a new microsoft product key but when I go in I'm hit with a message box "this key allows to extend the use of this product."

  I don't know even where to start again looking for help with this. Is there a number to call? This happened to other people? And especially how to fix this?

  Other information: the last time he asked me to renew my product key all left with a problem. I can only re new product keys so many times before I have to buy the product?

  I can only re new product keys so many times before I have to buy the product?

  
  
  It is often the case for the evaluation version. at the end of the trial you will need to buy or stop using it.

• HP Deskjet 3070: HP Deskjet 3070 extend the wifi signal

  Is there a possibility to extend the printer HP Deskjet 3070 wifi?

  No sorry.

• Satellite Pro P100: Can which digital cable I use to connect the stereo

  I just bought a new P100 and think generally that it's great.

  However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

  Any advice from someone who has connected to their own hifi would be appreciated.

  Bill Mac

  Hello

  The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
  You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

  Simply visit this dealer and ask for this kind of cable

  By the way: try to disable the option of its virtual when the laptop is connected to the stereo

• Should what output parameters I use for rendering the pc for mac final cut 10

  I recently spent from mac to PC and must make files to use on my machines to editors who are pimps. I need to know what output parameters, I should use to pull them into my graphics without any problem and must also ensure that the alpha channels are also available in the CF.

  It's a QuickTime .mov file. Now, you can do it is a PNG with AE sequence if you wanted, but I didn't think this is what you wanted. Select QuickTime as the format and PNG in the codec section. If you make sure you choose RGB + Alpha in your output module, you will also get your alpha channel.

• I contacted support and asked to remove all of the activations for my product. Software has been installed on a computer on which I can't use anymore. The computer is still in use, but I never have it disabled or uninstalled.

  Basically, how long this person will be able to use my software until updates of activation?

  This isn't how it works.  Even if the support reset your number of activations, products which have been activated previously will remain active.  (Unless it's a CC product, which requires regular reactivation.)

• Using ChangeDetectionEvent with the NI USB-6259 housing

  Hello

  I am very new to labview and LabWindows, so maybe it's very trivial to solve.

  I would like to perform an action (change some elements of the user interface) whenever I get a rising edge of a TTL signal.

  I hoped to achieve by following the example of ReadDigChan-ChangeDetectionEvent, and by defining a DAQmxRegisterSignalEvent() front on one of the digital input lines, but I can't even use the example for my

  USB-6259 (BNC).

  When I try to perform detection of changes on the lines from the port 1 and 2 I get

  Modalities indicated do not support change detection.  Select the lines that support the detection of changes. Device: Dev1 physical Channel: port1/$line0 the task name: _unnamedTask<0> Code of State :-201020

  I missunderstand something? Should the digital in ports on the detection of change of 6259 support?

  When you try the same thing with port0 the application hangs for a long time and threw just a message saying that

  DAQmxReadDigitalLines() timedout.

  I hope this is enough information to answer the question. If not, what else do you need?

  Thank you

  Manual

  Hello

  It seems that the USB-6259 does not support the detection of changes.

  Link:

  In NOR-DAQmx digital change detection

  http://www.NI.com/white-paper/4102/en/#toc1

• Should an Airport Express put dish to work properly?

  Ludovic bought an Airport Express to use to expand the WiFi network created by my Time Capsule. Implementation has been virtually automatic. Well done Apple!

  Ideally, I would like to repair the Airport Express is on one end, and instead placed flat on its base on a shelf/desk. Can anyone tell if it is OK or should the Airport Express really be laid flat on its base. Thank you.

  You can change the radiation pattern is by doing this, I have no idea what happens in your area. Try it.

• A program to choose which audio device uses

  I saw the same question asked and asked and on many different forums with many different responses, most of which don't really know what was the real problem.
  
  Is there a way to get the Application use Audio Device 1 and get B asks to use Audio Device 2?

  Before people will tell me how to tell what Audio device to use Windows Media Player or VLC, I KNOW!  It does not help a bit.

  I want to be able to do if the two Application A AND B of the application don't have the ability to select which sound device they use.

  I am running Win 7 64 bit. I have a 5.1 speakers connected to my onboard sound and I have my TV connected to the HDMI connector on my graphics card.

  What I want to achieve is to have the sound of the game I play to get out of my speakers, and the sound for the film I'm streaming come on my TV.
   
  I have not yet found an option in IE, Firefox, every night (64 bit Firefox) or Chrome that allows me to use what audio device they use. Not one that would be important they use other applications like Flash Player or Silverlight to stream the video, or which have an option to choose which audio device they use, although oddly enough I found an option to select what mic was used on a single program...

  The programmers of these two Star Wars: The Old Republic and The Secret World, (the two games I play right now) have neglected to include the ability to choose which Audio device they use in the games options.

  I came across a post suggesting IndieVolume, I thought "Great, the answer to my prayers!", I downloaded the trial version to see if it would work. Installed, open it, looked at GUI, set up... Nothing has changed, did not work.

  There must be a way to do it built-in to Windows or that you would not get the option to select which audio device WMP can use.

  I would have liked to be able to do this easily in Windows 7, because after all was not Windows 7 supposed to be all about doing things you want to do with your PC, so much easier to do? I wish more programmers to understand that it is really necessary for the choice of the audio playback device in their games.

  Until these times there at - it anyone out there that can suggest a program or something that will help reach my goal? Or a way to do within Windows?

  IE and Silverlight are the two Microsoft but they don't give you the option.

  There must be programming in Windows to do can you supposed to have a reading of default communication as a standard device. Surely, that works on the same principle, with various programs that will be run, get recognized by windows as a program of communication and see their directed audio output in an appropriate manner.

  Is there a way to access which programs windows recognizes as a communications program and adding to the list manually?

  Force windows to think that request is a communication program and get the result of requests, the value 1 of Audio device which is defined as the "default communication device".

  Leave the Application B crossing 2 Audio device which is defined as the "Default Device".

• should which driver I download? Help me

  Hello

  probook HP 4540 s base model

  my product number: A5S82AV

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  should which driver I download?

  me the direct download link.

  Thank you

  Hi 14saba14

  MediaTek (Ralink) 802.11 b/g/n wireless network (WLAN) card

  Windows 7/8 (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66089.exe

  8.1 for Windows (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63302.exe

• Extend the same WLAN using WLCs more

  I have a question, a little

  We already have a 50 AP WLC 4402 in our Organization, and currently we ran out of AP 50 license. It is we want to expand the WIFI network to another area, but because of the 50 maxi AP on our WLC, we have to get another 50 AP WLC.

  My question is can we extend the SAME local wireless networks using an another WLC. I know that this will work for WLC fail-over, but do not know if using an another WLC will give us mobility/roaming service throughout the Organization we want. Do we needto go to the WCS as well in this case to deploy roaming wide organization?. Basically it is a way to make existing WLC and new one act like the same WLAN with roaming throughout or using two WLCs will be separate areas of roaming.

  Please advice. Thank you.

  See you soon

  Lal Antony

  www.lalantony.com

  Hi John,.

  Yes it is possible and works great! Here is the link of mobility that gives you more information as well... but in the end to your question that you have... We can extend the WIFI network and there is no problen at all...

  http://www.Cisco.com/en/us/docs/wireless/controller/7.0/Configuration/Guide/c70mobil.html

  My other suggestion would be to go for a WLC that supports several APs... so that in the future if we want to expand the network, then it wont be any problems...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Order WMI - what command can I use to get the temperature of the GPU?

  Which command can I use to get the temperature of the GPU in WMI?

  Hi Daniel_99,

  ·         Do you use some kind of scripts?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

   

  I hope this helps.

• What API can be used to update the table cs_estimate_details (repair)

  I need to update the columns 'pricing_context' and 'pricing_attribute1' in the cs_estimate_details table.

  Which API can be used to update the columns. Where can I update the table directly?

  Try to use this "CS_Charge_Details_PVT" which in turn call "CS_ESTIMATE_DETAILS_PKG".