Show Good Bad ports

Hi all.  This question is generic I just hope I do not stir up a pot of worms.

Who is regarded as the best configuration of input-output monitor?

I was thinking about HDMI gold

No not the best of maximum resolution HDMI 2.0 - can go to 2K.  DisplayPost 1.2 is the best maximum resolution - 4K!

Tags: Dell Peripherals

Similar Questions

  • How good/bad is Reg Zooka?

    How good/bad is Reg Zooka and other registry cleaners? Do I still need to do anything in the registry? I read mixed reviews.

    There is NO SUCH THING as a 'good' registry cleaner - they are ALL, without exception, snake oil and dangerous.

  • After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for L775D.

    Original title: Graphics Adapter Gone.

    After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for my L775D. I have an AMD Radeon 6250 built in card and when you search AMD support site, it does not show my video card. I did a search automatically and empty came also.

    I also had a problem with a file. TVALZ_O Sys when I search because she is on board I came with 3 files which no I can do something with. The system will accept all available Windows updates and continues do not install 3 updates of security. This a Quad Core A6 Vision 1.4 GB processor any help would be greatly appreciated as I formatted and reinstalled until I'm blue in the face.

    Hello Stephen,

    The file that TVALZ_O seems to be linked to Toshiba ACPI and it seems THAT BIOS should be updated.

    Since you are facing many problems after the upgrade to Windows 7 Professional, it seems you may need to check the latest updates of the Toshiba BIOS.

    Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You have to get in contact with the support Toshiba BIOS update and to get help.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Bad port 5 swich?

    Hosts:

    I used this same switch 5 ports for awhile but removed that I is no longer necessary to share the connection. Now, I needed to reuse the switch. I connected the cable between the router and the swih e-NET and the port fire lighted up as expected. Whenever I plug a cable to any port LEDS to blink just as well as the connected computer report that a network cable is unplugged. The wiring is good because I can connected to other computers and router and internet access.

    When you connect the Ethernet cable to the switch and the computer you see all the lights on the Port Lan Switch?

    When you connect the switch cable to the computer, disable and enable the connection to the Local network, then check if it still shows the same message. If still the same problem try to reduce the map of your network card on your computer.

    Click on the Start button > Panel > network connections > right-click on icon "' connection to the Local network'" and select properties-here click on the button click "Configure" on the "Advanced" tab - In the area of 'Property' to highlight the link speed and duplex/connection network/type or type of media - and in the "value" box to select 10 MB/s half duplex / 10 half mode base T/10 basic and click OK.k OK.

  • Windows 10 shows a bad time in boot camp

    Windows 10 shows the wrong time. It is a big problem because it my ability to connect to some programs that I regularly use the effects. Even if I went into the Windows settings and set the Windows system clock to EASTERN time is 7 to 8 hours off the coast. I tried parameter, the parameters of time automatically detect and then turn off automatically detect with no joy.

    I heard that this happens because Apple uses GMT and Windows uses another method. I really need this to work.

    Someone at - he found a solution for this?

    OS X shows the exact time? If this is the case, change your source Windows time to be identical to the source of Apple, which is usually time.apple.com site or the use of the public NTP servers for the two operating systems.

    If you connect to a Windows domain/AD server, make sure that you have a good VPN or local connection to such a server.

  • in my laptop the battery shows percentage bad why? HP 2000-2313TU

    I just bought my laptop about six months is over, but it is the percentage of bad showing why it is showing like this. If no clarification is there please update me.

    SOMETIMES IT SHOWING THE "YOUR PC PROBLEM RAN PLEASE REBOOT THE SYSTEM" WHY IT IS SHOWING LIKE THIS.

    OPERATING SYSTEM: 8 64-BIT WINDOWS

    RAM: 4 GB

    Hi SIVANAGENDRA,

    Welcome to the HP forum!

    Thanks for your post, I will try my best to help.

    I understand that you have a battery problem. Here is a link to Power & batterieswhich I think will be useful. If you would like additional assistance, please can you give us the exact model of your computer. How can I find my model number or product number?  Please let me know the results.

  • When I turn on my computer it shows various bad bowes, saying refer to floppy

    images are displayed saying that is googletoolbar.bad image see floppy... its all sorts of bad picture display boxes? don't know if its in my hard drive or what?

    Hi KellyHall731,

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed on the computer?

    · What is the exact error message that you receive with the error code as appropriate?

    Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • Linksys WRT1900ACS shows all the ports that are open and firmware restore.

    Hi bought a new Linksys WRT1900ACS and has the following questions.

    a. How can I determine whether version hardware version 1 og 2.

    b. making a portscanning on the Linksys WRT1900ACS for the internet I found that several ports where free.

    When I went into the Setup, I get only portforwarded 20/21.

    I could access my internet QNAPS 3 + more.

    But the router WRT1900ACS didn t show this when it has been planned, why?

    I now that the QNAP may change the port settings, but I do not have "done this or asked for it", but why it does not appear

    When I log in the WRT1900ACS via Smart Wi - Fi.

    (can not see all 3 QNAPS when I use my linksys EA6500 router.)

    c. After you have determined the B. I tried to Flash the firmware with the firmware OPENWRT. But now I can access the WRT1900ACS and the WiFi is not charged more. The normal router works. How do I get:

    D: flash the original firmaware (via lan)

    e: what OPENWRT firmware has GUI and can be recommended for WRT1900ACS and where to download?

    f. are there links to og to youtube which is very imnformative to do this?

    Thank you

    John

    [email protected] wrote:

    Hi bought a new Linksys WRT1900ACS and has the following questions.

    a. How can I determine whether version hardware version 1 og 2.

    Thank you

    John

    This must appear on the label of the product below.

  • Jet office pro 8500 does not print Yellow - no error messages and printhead life shows good

    I have an Officejet Pro 8500 A909n Prime that doesn't print Yellow. I have replaced the yellow cartridge twice, cleaned the printheads as well regular and deep cleaning, and I cleaned the contacts on the print head. Current information shows the printhead as good quality. The amount of ink is correct. There has never been no error messages whatsoever. What gives?

    {The content removed}

    Sorry, but none of your suggestions helped. What I suspected at the outset was the printhead and it seems to be what needs to be replaced. HP and print heads are a big problem and I had this problem on previous models of the officejet family. My Canon has been in service for seven or eight years and I have never had a problem with it. I think that if I replace this printer that I might have to consider anything other than HP. Thanks a lot for your help.

  • Practice good/bad workaround or does it not matter...?

    Hello

    I have a project that requires some shared actions to hide. / show something and needed a quick fix to hide 1 9 show I've done as follows... (keep in mind, I use CP7 not 8)

    I copied my slide show 20 of hide1 from another project, that maintains the connection between the buttons and images etc, but because it was too much for my other project, I just put things on the slide not copied displlay output etc and then renamed those I wan to designate in the new project and everything works fine However, if wer do this is this bad practice as any other editor CP further down the track, a need to modify the project, might think it is a mess and mish mash with ttoo much (well hidden) object in the slide and may make it more difficult for them.

    My initial thoughts on which is while it can look a bit of a waste, my approach to any existing project is to deconstruct to see exactly what is happening, but a few others could just look at it as a real pain. (I did this way that I couldn't change a shared in CP7 action)

    So, I was just wäntig to ask this question to the community and get feedback on your thoughts on this approach...? (I hope I have explained this properly and is understandable, etc.)

    See you soon

    Sabine

    Each shared action exists also as model in the drop-down list that begins with white in the advanced Actions dialog box. I'll make a copy of the description of the action and its parameters, because you have to reenter those.

    Open the template that you want to change. You will have to fill in the parameters (no matter what) and can make changes. Then save it again as a shared action. The biggest problem is that you need to refill all the descriptions.

    The file size is only a problem for the raw file, never for the published file. And from my experience, I know that using a common action repeatedly to replace the double tip action lets you save on the size of the file. More shared stocks have descriptions, that is not the case for advanced actions. I used to add some text containers in the work area to have a description of the variables and advanced actions.

  • When I connect to my apple ID, I get a notification but it shows a bad place.

    When I connect to my apple id account, I get a notification, but it shows an incorrect location

    Maybe its your gps Board, may be a hardware problem, I would try something like: connection to another device and check the location, if its ok, we know its your device. If this isn't maybe your Apple ID account (I don't think that it can so be it)

  • USB-232/2 shows the COM ports but not found resources VISA!

    Hello

    I use an NI USB-232/2 interface to connect my OMEGA Engineering temperature controller to computer. The thermostat communicates with the computer via hypertermianl and the configuration of the OMEGA software, but can not be detected by OR MAX I've attached a screenshot of my MAX of NOR. I could see the two COM ports, but I can't see the VISA test Panel.

    My problem is similar to the post problem OR USB-232! I tried the solution for uninstall and reinstall NI VISA both NI Serial, but still does not.

    OR Labview 2009

    OR MAX 5.6.0

    NEITHER version 4.0 Serial

    Version NOR VISA 5.4.1

    Temperature controller: Omega Engineering CNi1644-c24

    Spoke engineering application NOR two days, no solution. Can anyone help? Thank you!!!


  • EZXS55W bad ports?

    Im having trouble with two ports on my ezxs55w. Middle East - the two ports, 2, 3 do not work. Port number one and four seems to work well. When I plug a computer in #1 it works fine, then two or three, I get limited or is connectivity says im connected but only receive a self assigned ip address and cannot ping anything. Anyone have any idea whats going on? tested with four computers, each with their own cable and all are on #1, but are not on 2 or 3

    Thanks in advance

    wcryer said "when I connect a computer #1 it works fine.

    The switch is connected to your modem or router?

    Don't forget that this is just a switch and provide internet access to a single computer at any time if your switch is connected to a modem...

    However, if your switch is connected to a router then you can access the internet on several computers at the same time...

    -Use the same computer and the same cable, disconnect the cable from the port 1 and connect it to port 2/3, let the computer reboot, unplug the cable from the switch, wait 1 minute and re - connect the power cable and see if you can access the Internet... If Yes, then your switch is functional...

  • New event shows always bad Organizer.

    TB 45.4.0 when you create a new event in the calendar, the organizer of the event indicates always the same wrong e-mail address. The calendar settings have the correct e-mail, but it is ignored. Create a new event and then invite guests; the organizer of the event always has the same email address regardless of what timetable, I add the event. The incorrect e-mail that is shown is my gmail account. I recently had my gmail set up in TB but not subscribed calendar and I wonder if this has left a bad setting somewhere? Otherwise, I can not explain this problem and would appreciate any help. Thanks, Cliff

    Create a clean profile in Thunderbird and import your stuff from the old http://brucejohnson.ca/ThunderbirdProfile.html profile

  • How to mark clips in the browser as good, bad or ugly so I can see at a glance is it ha been used?

    I'm trying to find a way to mark the clips in the PP 2015 cc. Have not yet found a way.

    Check the column "of opportunity" in the project window. Which shows clips and assets that have been used

    You can create a custom column if you want or you can use the labels you choose.

Maybe you are looking for

  • Blue screen - gel Qosmio X 770 - 11 p PSBY5E

    Hello. For the last weeks, I had a lot of problems. Indeed, everytimr I tried to update my graphics card, my computer got BSOD or just froze completely each time that I started to use the card. In both directions, I had force close. I chose my Nvidia

  • How to use the external screen with my Satellite M30?

    Hi guys, I have the following problem: I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard. Now that I bought a TFT I wanted to use it as a primary device, so I n

  • analysis of a text file to get a value

    Hello I want to parse a file to search for a value in wCHI ^ 2, which is given somewhere in the text of the following file: wCHI ^ 2 = 739.59 The text file is an output file retrieved by a program. It is very long with many other information and have

  • In Outlook Express, my E-mail address with photos will not show the photos.

    When I transfer the mail, I can see the peak and then in the preview of the shipment.  How to fix? MY INCOMING EMAILS DO NOT SHOW PHOTOS INCLUDED IN THE MAIL UNLESS I PASSES, VIEWABLE IN PREVIEW!  HOW TO FIX?

  • 4000 TL is not detection of the bands write, which is design protected?

    I keep lots of tapes in the library for easy access for the restorations. From time to time, I flip the protect against writing about the bands tab to protect them. However, once I put them in the library, they don't show as write protected. Even in