show sound dv7

Similar Questions

• Show SOUND

  Salvation Skype community.
  
  My Skype does not-then on my sound troubleshooting I studied
  
  WIFI
  On my bar of laptop on the right of ITS
  
  The above mentioned parameters works very well, since I was also listening to music on the internet.
  Then, I tried to follow instructions of own Skype if there are problems with sound - the proposed instructions were followed and found no issues whatsoever.
  
  However, I noticed that under the tab 'Tools' and 'options' under 'sound options' in the microphone section I have seen that there was no available microphone, which is weird because I have a headset with a microphone attached to the headset pre.
  This setting worked for me since then until now, so I wonder what this problem might deviate from.

  

  Open the Windows Sound control panel -> recording devices.

  What do you see there chosen as Deafult revording device?

• HP SLATE 7 2800 - SHOW SOUND

  Hello

  I got my Tablet for a few months now it works fine except the sound. in order for me to hear anything of the unit, that I have my headphones plugged in. In the upper right corner of the notification bar th 'Helmet' symbol is lit constantly. I entered all options and played with them a little. I tried a reboot, factory reset and swearing to it.

  I had a micro SD card in but I removed it. The device has not been abused somehow, none falls hard or rough bumps. However, I have quite a few apps installed on my device. I can list out if necessary.

  Thank you in advance.

  Hi @TwoPointOh

  Thank you for your response. Fortunately, the port is not damaged; It was only ditry! I just cleaned the helmet and fixed it.

  Thank you

  Mehdi56r

• I have no sound, dv7

  No sound

  Hello

  Please find the link given below might help you solve your problem.

  Don't fix no sound or Audio problems in Windows 7

   

   

  Tips for solving common audio problems Microsoft

   

• My CD/DVD player as uninstalled itself and fixed showing sound there please help me!

  Hey, please tell me how I can fix my TSSTcorp CDDVDW TS - L633A ATA Device it shows in Device Manager and it says its been changed, I even tried to roll back the version and almost everything tried and still, it opens and closes but it does not appear in my computer or will not read a disc and it won't let me download a better cause it says there the last version installed so idk what to do I give up so please help...

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My Iwatch vibrate when you receive a text. Should she make a sound?

  My shows I vibrate when you receive a text. Should she make a sound?

  Hi Larry

  Sound alerts and haptic depend on your settings. To check their:

  On your iPhone, app in the watch, go to: My Watch (tab) > Messages.

  -For example, you might set this parameter to custom, and then, under alerts, select each of the alerts to show, sound and Haptic.

  Also on your iPhone app in the watch, go to: Watch My > sounds & Haptics - check that:

  -The alert Volume selector is where you want it to be;

  -Silent Mode is not enabled;

  -The switch force haptic is in the central position or the right hand.

  -Eminent Haptic is enabled (to get before announcements of current alerts).

• LabVIEW 8.6 sound and measure suite not installed properly under Vista 32 or 64 bit

  I apologize if this isn't the right place for this post, but I need a solution. I recently bought LabVIEW 8.6 Developer Suite with the Suite Sound Measurement and to create a program of NVH testing at my company. I am a newbe to Labview, but I've been a programmer/hardware geek since the days of the TRS-80 model1. Here's my problem. I installed the following developers DVD package on my Office Windows XP Professional and all goes well. I see the following Sound and Vibration Measurement listed under LabVIEW 8.6 able & Automation Explorer, and examples of the Toolbox for work in LabVIEW. When the laptop I bought to do my current job came with a Vista Business Edition 32 bit version installed I found the following problem. On this machine and two other machines to Vista (64-bit and a 32 bit) I tried, the installation does not record the Souind and vibrations under LabVIEW 8.6 Suite and they show Sound and Vibration toolkit as not installed in the examples section. In the Panel by virtue of National Instruments, all 4 machines show the Suite Sound and Vibration as installed 6.0. I have tried to uninstall, reinstall, change in the control panel and reinstall from DVD without change in the result. I really need get the laptop works as it's my real development and test machine. XP Setup is not an option because the machine newly purchased with a high-end sound system and downgrade XP was not available. I'm out of ideas.

  I wanted to close what I got it finally works. This time, I uninstalled the audio and vibration of the LabVIEW control entries in uninstall Vista. Then re-installed and now it works. Before there were three entries, one for the suite, one for the runtime and one for the Toolbox. After having removed all three and reinstall it from the DVD, only subsequently arises, and everything seems to be good.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Sound displays correctly but no sound plays

  Windows Vista no sound

  I am using Windows vista and windows vista show me ' device high definition audio "is properly install for sound, but there is no sound. When I click on the audio digital audio output device icon bar is open that shows his cheek then I click on the mixer, mixer there are three sound bars first for digital peripheral output that shows his cheek so window Soundbar which shows that the sound is not playing, then last Internet bar of his Explorer this sound bar which shows sound is not playing. What is the real problem his device driver is updated, but still the sound is not listening not playing, please help me. Thanks in advance

  Hi imran ahmed 1982,.

  Follow the steps below:

  Method 1:

  See:

  Tips for solving common audio problems

  Method 2:

  See:

  No sound in Windows

• Cannot change the silent sound on the computer.

  Original title: No speaker icon audio/Sound-do not enter - when pressing on it responds but cut symbal turned off

  Speaker icon on mute, when I click it, it does not react as it will normally.  Mixer shows sound that crosses, but still no sound. Drivers are up-to-date. checked the hdmi cable and port on the TV well. TV not on mute. Reference Dell Zino, windows 7.

  Hello

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see that you can not change his mute on the computer.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Provide us with a few details in order to better understand the issue.
  1 meet you having problem with sound only when you connect to the TV?
  2. did you of recent changes on the computer before this problem?

  Method 1:
  We will first perform this troubleshooting and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically
  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:
  If the first method does not resolve the issue I suggest you try the procedure described in the article and see if it helps.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Check out the link for more information.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Fusion 6.0.2 - cannot connect virtual device sound

  Hello

  I recently updated my system to a new Mac Pro (MacPro6, 1 - coffee can style).

  I have a pair of speakers connected to the line out on the Mac Pro, and his works very well under OS X.

  I use VMware Fusion 6.0.2.

  However, I feel a particular sound problem in all my virtual machines of Windows.

  When I turn it on, I get a notice indicating:

  Cannot connect virtual device sound because no corresponding device is available on the host.

  You want to try to connect this virtual device whenever you turn on the virtual machine?

  
  

  No Yes

  
  

  
  

  If I click No., I wonder what is new in an infinite loop.

  If I click Yes, Windows starts and the sound works, except that it comes out of the internal speaker on the Mac Pro, rather than the speakers on the line output.

  I have several virtual machines of Windows (XP, Vista and 7), and this problem affects all the.

  VMWare tools is updated in all virtual machines.

  All of these machines were copied from my old Mac Pro, for testing, I decided to create a new virtual machine from scratch.

  I used Vista because I had this .iso at hand.

  At the end of the installation, after installation of the VMware tools and all the virutal machine had no noise.

  Windows has indicated that his material is installed and the windows volume meter shows visually playback of sounds (this small sound level meter), but there is no sound will appear.

  After cutting this new machine virtual and going in the settings, I noticed that he had missed at what soundcard put out of SERVICE.

  I turned on and when I turned it on I got the same message and the same problem as all other virtual machines.

  I also tried to edit the .vmx to show sound.virtualdev = 'es1371'but this disabled sound totally.

  
  

  I'm at the stage of ideas.

  
  

  For any help or suggestion would be appreciated!
  

  Most Macs have built in the input device, so they list a 'internal' microphone as the default selected the input device. The end of 2013 Mac Pro is not a built-in microphone, so by default, it will show "no input device found. VM Fusion 6.0.2 does not seem to take into account the case where there is no device found entry. I consider this a bug, but you can work around it by adding any input device. For example, the "headphone" in the back the Mac Pro is actually a pair of entry. If you connect a headset, as what is delivered with an iPhone, then it will be displayed as an input device and the merger will stop at throwing the error.

  I hope that VMware solves this problem in an update.

• Presario SR1463CL with drivers problems

  Please be tolerant of beginners.

  I purchased a SR1463CL to add to a DELL Dimension - old but never fails. -the HARD drive was crushed. I replaced the HDD Samsung with Western Digital. I have replace the dial-up modem. All this without problems. I installed Windows XP Pro and SP2 update. My system detects "New hardware" drivers VGA Compatible and multimedia controller. I have had no success finding the right drivers and their installation. My monitor works find, but I have no sound.

  Poster 'sounds, video controllers' Device Manager with the problems. Initial device showed sound and audio by default to the Modem. I removed which and at this point no device is indicated.

  Device Manager shows no driver found for new hardware and online search has failed. Windows Update detects any is available. I checked on the resource one manufacturing line have failed in my downloadsfrom RealTek and Nvidia.Dial - up has had major periods and material has been identified as there's no way for the system. Previous owner had made the back-ups-DVD-but they went "purple haze" and could not be read. That's why I installed XP Pro.

  My modem does not work on and additional time. It will connect and funtion but after a few minutes I'll get "Page not found" displayed.

  So, I use my Dell Dimension for internet troubleshooting. Any help is greatly appreciated.

  Respectfully.

  "Submariners do it deeper."

  Thanks for the information. Due to serious conflicts resulting from auto-updates from microsoft, which I had to reformat the HARD drive and have located since the necessary drivers to the www.sis.com for VGA and www.realtek.com for audio AC 97 readers to be precise. Manually review and choose downloads in the future.

  "Greens, all councils prepare to dive."

  Thanks again for your help. It is greatly appreciated.

  Bamabubblehead went to the abyss.

• Satellite C855 - speakers suddenly stopped working

  I have a Satellite C855-1J2 running Windows 7 Edition Home Premium SP1. I turned on December 21, 2012 and installed five applications - the latest versions of Firefox, CeltX, Notepad ++, Open Office and Microsoft Security Essentials (I removed McAfee). I have the latest Windows. Since then I have not installed other applications.

  Three days later, my laptop was working fine until, suddenly, that the speakers stopped working. I can identify the specific incident that caused it. I connected a pair of perfectly ordinary headphones using the standard headphone jack, power the laptop off, after that I was done listening but headphones plugged on the left.

  When I turned on the laptop back the next day, no sound came in headphones.
  When I unplugged them, no sound came from the speakers.
  I rebooted my machine and the speakers worked fine.

  However, I am now in a situation where whenever I turn on my laptop, the speakers do not work and they will work again when I restart then. A little investigation of this problem shows the following...

  Whenever I turn on my laptop and go to control panel-> hardware and sound-> manage Audio devices I see two items:

  (1) ' - high definition Audio Device - speakers not plugged"with a speaker greyed out icon with a red arrow.

  (2) "audio digital (S/PDIF) - high definition Audio Device - default device" with a colored external amplifier icon (it looks a bit like a DVD player) with a green check mark. There is an icon of audio level next to him that shows sound whenever the sound is played on my laptop, but no sound is audible, either through my speakers or headphones.

  Whenever I then reboot my laptop and go to control panel-> hardware and sound-> manage Audio devices I can see an article:
  "Speakers - Realtek High Definition Audio - Default Device" with a colorful speaker and a green arrow icon. The sound works perfectly well.

  I already looked online and the Toshiba forums for a solution to this, but while I found lots of people with similar problems of speaker with Toshiba Satellite laptops, I have not found a solution (and when I say something, I mean something a little more useful that "have you tried completely reinstalling your operating system') so this thread.

  Even if a reboot is currently to solve my problem, I obviously shouldn't have to restart my machine at all in order to get something as simple as his, so my questions are:
  (1) what is the cause of this problem - in other words, why what is happening?
  (2) what is the Toshiba solution to this problem?

  Thank you very much.

  Hello

  It seems to me that the issue you described above that the speakers would not be chosen as device by default, but the Audio Digital (S/PDIF).
  Somehow the audio driver cannot detect the first initialization of the system speakers.

  I don't know why this happened but I have two proposals:

  (* 1) * uninstall the audio driver from the system. Download the driver from his most recent of the Toshiba page and install it after restarting the laptop first.

  (* 2) * if installing the audio driver is not enough, the last resort would be the recovery of the system.

  (> 2) what is the Toshiba solution to this problem?
  If you want to get a recommendation of Toshiba, I would give advice to connect with people. It is the community of users.

• How can you stop texts come on Apple Watch

  I want to stop my texts from my iphone come on my Apple Watch I can what to do and how

  Hello

  You cannot turn off the Messages to be delivered to your Apple Watch, but you can disable notification alerts:

  On your iPhone, in the application of the watch, go to: My Watch (tab) > Messages:

  -Choose custom and then, under Alerts position, turn off of each of the alerts to show, sound and Haptic.

• HP p6540y-

  I hear of hdphones, but not my spkrs. Bought new spkrs, still no sound. My computer says everything is fine, but no sound. Thanks in advance

  I tried those and still no sound from my new spkrs or old. To after I've watched everything should work. All volumes are growing, not mute and my Equalizer shows sound from my skrs, but no sound is actually produced.

  Thank you for your help.

  All the best,

  Bolt right