showing 1 GB 2 GB ram

Similar Questions

• Control Panel shows that 4 GB of RAM, but product specs say I should have 8GB

  My HP Pavilion Elite HPE-250f desktop computer is supposed to get 8 GB of the RAM factory installed, but the control panel shows only 4 GB. When I run the diagnostic with the Support Assistant software it says that everything is working well, but also shows that 4 GB of RAM. I've had the computer for several months and the warranty just expired. In the past, I noticed it says 4 GB and thought that I should have bought a computer with only 4 GB, but it has always seemed strange to me. I looked towards the top of the record online and it says the HPE-250f has of 8 GB, and it also says 8 GB on the box in which it came. I didn't do any changes to the computer and never open the Cabinet. I hesitate to open the cupboard, but do not feel I should have to pay a lot of money to understand this.

  HP Pavilion Elite HPE-250f

  Windows 7 Home Premium 64-bit

  It took me a few tries - and months of frustration - but I solved the problem by carefully removing the memory cards, clean gently slots and cards and firmly the resettlement of the cards. It's been several months now, but the memory has been resolved. I had serious problems, as it is stated in this thread, with a catastrophic failure of the graphics card and HARD disk failure. I read on several posts that this particular graphics card was problematic, so I've upgraded to a Radeon HD 7700 series. I got the Core edition, which has 2 GB of memory defect to 1 GB. No problem since.

  In case of hard drive failure, it was a disaster! I replaced the HARD drive of 1 TB with a 512 GB SSD, but it kept the infection by a rootkit that I couldn't clean up. I tried cleaners virus and rootkit of several software companies with no joy. Not even the first products like Kaspersky, McAfee, Sophos, BitDefender and other companies. I reformatted the drive several times, but the hook came back in return. Finally, I brought the computer to a friend who is a computer SCIENCE professional. The rootkit probably lies in the commercial cloning software (Acronis True Image HD) that came with the SSD, it said. We loaded the operating system without using Acronis and have not had any problems since! I've also installed a WD Blue 1 TB HDD and rebuilt directories so that all libraries (Documents, photos, videos, etc.) are on the disk hard while the system is installed on the solid state drive. The upgrades were worth every penny! Now, my desktop HP 5 years computer works very well and the performance is very good even by today's standards. Boot times are much faster, too.

• Satellite M40 - shows only 1 GB of RAM instead of 1, 5 GB

  Hello

  I have a Satellite M40-296 with 512 MB of RAM. I bought a 1024 MB of RAM (from Kingston) and put it in the computer. He could show about 1500 MB, but I only have 1024. It s like the work of a few Don t of 512 MB.
  I took out the 512 MB and I 1024Mo, but if I put the 512 MB 1024MB still.

  I updated the BIOS to 1.20

  Can someone help, please?

  Thank you

  Hey Buddy,

  Normally, you can move the laptop to 2 GB RAM max.
  Did you test each module in each slot?

  I put t know that's wrong exactly, but I think that the modules are not compatible together if only the 1 GB module will be recognized.
  Normally for optimal compatibility two modules with the same characteristics and size must be installed.

  I recommend buying a second module of Kingston.

• Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

  {color: #000000} Dear Forum Toshiba,

  I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
  I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
  I tried to upgrade the RAM to its maximum capaity supported 2 GB.
  I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

  in the BIOS, I see only 1 GB of RAM.
  I tested each RAM separately and they work very well. The problem is that when I install in my

  locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

  version 1.70 (for XP), but the laptop continues to show only 1 GB.

  I tested the RAM separately:
  -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
  -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
  - then I checked another unit of the RAM in the same way and worked well
  -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
  -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
  - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

  Here's the description detailed 1 GB modules that I try to install:

  SLOT #1
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Reference number: 9905293 - 0.14A00LF
  Serial number: 6ACC0C46
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  SLOT #2
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Serial number: AD0CCE10
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  What should I do?
  Help, please!

  It IS concerning.
  Marius Militarescu

  [email protected]

  {color}

  I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

  In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

  I think that there is no other way because you have updated your BIOS to the latest version.
  Here is the part number for RAM Toshiba compatible:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• 4 GB ram only show 2.61 GB of ram.

  my computer is Windows Ultimate on a 32-bit computer, which is the maximum amount of memory 4GB.

  My computer shows I have 4 GB but only 2.61 GB of ram is available.
  My BIOS says I have a total of 4 GB of ram and my onboard GPU uses 512 MB of that so I should have 3.5 GB of ram.
  Please help me get my 3.5 GB of ram on my computer.

  W7 32-bit cannot access an absolute maximum of 4 GB ram and generally less 3.5 G or less.

  See - http://support.microsoft.com/kb/978610

  It depends on the exact configuration of your system and other material you have.

  2.61 G seems a little weak, but its not unusual. In fact if you search on Google, very few people seems report 2.61 G as well.

• Satellite L350 - Vista shows only 2 GB of RAM, but I have 4 GB installed

  I installed 2 two modules expansion memory of 2 GB each to my satellite L350 that works on Windows Vista Premium.
  I bought at Toshiba UK who confirmed that they were the correct modules.

  The System Control Panel icon always indicates RAM 2 GB (not 4GB) memory.
  If I remove one module 2 GB, the system icon of 2 GB (which is correct) said Control Panel.
  I have re-installed the two modules and changed their round in the slots, but the system icon still says 2 GB.

  Hello

  You have 32 bit or 64 bit Vista?
  First Vista 32-bit is not able to handle 4 GB of RAM. 32 bit OS have a limit, and they can only use about 3 GB of RAM.
  Here is some practical information: http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  You have installed Service Pack 1 for Vista?
  How much RAM does the BIOS?

  Welcome them

• Satellite A110-195 shows only 3 GB of RAM

  Hello

  Last week I bought laptops SATELLITE A110-195 and memory KINGSTON KVR533D2S4 / 2G to expand memory to 4 GB, I want to have 4 GB, but after putting is computer shows 3 GB not 4 GB. Could you help me?
  Why shows 3 GB not 4 GB?

  Please see this site:

  http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

• Windows 7 64 - bit showing only 2.5 GB RAM usable out of 6 total

  Here is a link to what looks like...

  http://img200.imageshack.us/img200/7133/WindowsR.PNG

  I saw this problem solved by rearranging the chips of RAM in various configurations, ex: 1,2,3,4 4,3,2,1 or 3,4,1,2 etc.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Photoshop CS5.5 does not show the right amount of RAM

  I have a PC with 3.25 MB of memory.  I recently bought the CS5.5 creative Suite.  I change my preference when I noticed on the performance under memory usage tab, it says:

  Available RAM 1569
  Ideal range: 863-1129

  I use Photoshop: 941 MB

  Anyone know why Photoshop is only see 1/2 of my memory?

  You run the 32-bit version of Photoshop, which can not use all the system RAM.

  You use also a 32 bit OS, then you will not be able to run the 64-bit version.

  In 32 bits, Photoshop can use up to 2 GB of address space.

  And some of this space is used by the binary files, plugins, presets, etc.

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• RAM for Vista problem shows only 1 GB despite 2GB material

  I have Windows Vista 32 bit installed in my system with 2 GB of RAM, and it worked perfectly. Yesterday my system performance show only 1 GB of RAM and the Ram usage is 60 to 90% of the capacity, I know that max support 4 GB 32-bit system, but how is it ' show only 1 GB? I checked the RAM blocks separately in each lazy and they both works perfectly, yet, it shows only 1 GB? What to do? It's like Vista only uses one of my blocks of Ram.

  Memory of rum diagnostic test:

  Memtest86 + - a Memory Diagnostic tool
  http://www.memtest.org/

  Swap the memory sticks and try to start from with one stick in the slot. Do this for both sticks of memory the. /

• Ubuntu reports bad RAM?

  Yesterday, I upgraded my Netbook to 2 GB of RAM. Windows XP recognizes all the new RAM.
  Today, I restored to Ubuntu - Ubuntu shows only 883 MB of RAM in the system monitor.
  Is this a bug in Ubuntu, or is there something else I need to change to recognize all the 2 GB?

  Resolved - after that updates installed the correct now shows RAM.

• Pavilion dv6 Notebook: card WiFi and RAM update

  My WiFi is not able to go as fast as the speed that I pay the cable company.  I tell myself that if I pay for it I would be able to go that fast.  How can I tell what will work in my notebook?  Same question as the RAM. Currently I have 4 GB and would like to go as far as I can.

  Please tell me what I need to know, in layman's terms, to buy what I need.

  Thank you!

  Hello

  Your computer is a HP Pavilion dv6-6112nr laptop PC:

  http://support.HP.com/us-en/document/c02996687

  1. WiFi: your machine was built around 2011 so the wifi upgrade is out of the question. You can use the USB dongle if you wish.

  2 for the RAM: your device supports 16 GB max (it has 4 GB from the beginning). Please see page 66 of the following manual for part number. You can buy HP or elsewhere.

  http://h10032.www1.HP.com/CTG/manual/c02842252.PDF

  The manual also shows you how add/replace RAM. More manual:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/5082212/model/5173060/manuals

  Kind regards.

• L20-181: RAM is not properly recognized

  T L20 181 it is written in the properties, I've got 256 MB of ddr2 ram, but when I check on computer it shows only 190 MB of ram. There is no chipset or graphics card that supports the computer's memory in this model. so I'm interested if
  I have been deceived or is just 190 MB of ram. Next problem is that there are no disk with windows on the inside where I can turn to
  find solutions so that such an accident?

  [Edited by: admin November 6 05 10:20]

  Hello

  How Lorelei said. It is a shared memory graphics card. As far as I know it of possible to set the in the BIOS. You can choose between 16, 32, 64, 96, 128 MB.

  Good bye

• HP Pavilion g4: RAM Upgradation

  Can I put my 2 GB RAM to 8/16 GB? If yes then what kind of RAM I'll choose?

  Processor: Intel (r) CPU of Core i5 - 2410M to 2.30 GHz

  Product name: Pavilion g4

  Product number: LZ749PA #UUF

  Hello

  The following link shows the specifications of your machine, it's a HP Pavilion g4-1109tu Notebook :

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02851542

  The card said: expandable up to 8 GB of DDR3 memory

  But please use the manual according to Ted the right part:

  http://h10032.www1.HP.com/CTG/manual/c03137358.PDF

  The manual also shows you how add/replace RAM.

  Kind regards.