Showing the façade unqiue for several instances of appeal Subvi

Hello

I have a Subvi, which resembles a table 2D data and graphs of the plots.  I call the Subvi and he opens the subVIs Panel to display plots.  Now I would like to put the Subvi in one for a loop and call several times with various 2D charts.  I'm trying to figure out how to make multiple instances of the Subvi front panel appear. Essentially a front for each table 2D.  All I can get it to do is to open and close the user interface for each Subvi call and for the last table display the user interface for the data.

I tried to make the VI reentrant and selected the option pre allocate the memory for each clone.  Maybe it works, but I need the front of each Subvi call to stay open.

Thank you

Gary

Thank you both for the help.  I used the open VI of reference and call by reference and created a strictly typed reference VI to call the Subvi dynamically.  Is attached a screenshot of the block diagram.  The link below has guided me to created the strictly typed VI reference required by the "reference" entry of the reference function call.

http://zone.NI.com/reference/en-XX/help/371361H-01/lvhowto/create_strict_type_vi_ref/

Tags: NI Software

Similar Questions

  • After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for L775D.

    Original title: Graphics Adapter Gone.

    After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for my L775D. I have an AMD Radeon 6250 built in card and when you search AMD support site, it does not show my video card. I did a search automatically and empty came also.

    I also had a problem with a file. TVALZ_O Sys when I search because she is on board I came with 3 files which no I can do something with. The system will accept all available Windows updates and continues do not install 3 updates of security. This a Quad Core A6 Vision 1.4 GB processor any help would be greatly appreciated as I formatted and reinstalled until I'm blue in the face.

    Hello Stephen,

    The file that TVALZ_O seems to be linked to Toshiba ACPI and it seems THAT BIOS should be updated.

    Since you are facing many problems after the upgrade to Windows 7 Professional, it seems you may need to check the latest updates of the Toshiba BIOS.

    Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You have to get in contact with the support Toshiba BIOS update and to get help.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • TB c. 24.0: changed ISP. ~ new email in the settings of the server & Server outgoing & all address books and Contacts; TB still shows the old email ID for Fwd & Rply

    TB c. 24.0, Win 7 Pro. Change of ISP. I use Outlook 2007; woman uses TB, same box. TB change username & email address in the settings of the server & outgoing server & default value. E-mail address changed in all address books and Contact lists. Now the TB still shows the old Correo electronico in < from > when reply or forward. It's confusing beneficiaries, who have sent their responses on a now non-existent account offshore. Check the Contacts Windows - empty. Check my Outlook 2007 - all Contacts changed appropriately. How do I kill this old TB e-mail address when it is not yet listed more - except when we try to reply or forward?

    Thank you! I don't remember the old data (ports, password, etc.) to re-create the old account to my wife several months ago and with a different ISP - I had written all this down, but it was destroyed in a fire at home - but you put me on the right track. I created a new account (sub?) via file > new > account existing with new information, verified mail he was working and then deleted the new subaccount. Now that works. Duh.
    This one goes in the file "fixes weird!

  • When I connect windows, the hard disk works for several minutes

    Hello

    A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

    What windows software using the hard disk with log in?

    Thanks in advance

    motasemsadelghi

    What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

    Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

    http://support.Microsoft.com/kb/310560

    The foregoing is for XP, but also applies to Vista.

  • Icons displayed incorrectly at startup, the computer is unusable for several minutes

    My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

    When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

    This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

    http://support.Microsoft.com/kb/929135

  • VMware vcenter converter standalone physical conversion to virtual stuck to the completion of 81% for several days

    Hello everyone I have an interesting question, I'm physical conversion to virtual pointing to the new virtual directly on the server esx conversion would set schedule for a day. But now, it's just stuck at 81% and not go further! I don't get any errors of ideas? questions are there a basis that I can look to see what is happening? Is there a way I can fix it without start over again. There are enough resources on the destination esx I had to change the hard drive space for destination and ram, but done nothing radical imprint more small which I think should do better.

    It's an interesting case, you have here. I guess that conversion is complete, but somehow you do not see or a deadlock occurred.

    Anyway you will probably be able to export logs to the customer. Go to the directory of newspapers to %ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs (for WP/W3K) or vCenter Converter Standalone\logs %ALLUSERSPROFILE%\VMware\VMware (for Vista +) and find the log of the last worker (vmware-converter-worker - .log #). The status of the conversion is currently connected. Take a look, or that she has finished, is still running, is stuck.

    If he has you can try restarting the client and/or server converter service. Do not stop the worker service unless you are sure that there is no conversion running!

    HTH

    Plamen

  • VMplayer using for several instances of XP Mode.

    OK, so I used the built in Windows XP mode for about a year now, and while I'm generally pretty happy with it, I would switch to someont that is not so prone to crash.

    I have downloaded VMplayer, converted my VM, added the xpmode.enabled = true line in the .vmx files (otherwise they constantly asked me to activate) but now I get a message when I try to run two simultaneous to the virtual computer that says I am only able to run a single instance of windows XP Mode.

    Using XP mode I was not limited to a single copy, and because of what I do with them (VPN in several places at once) I need to access several simultaneous sessions.  Someone at - he found a way around this with VMplayer or am I stuck with XP Mode?

    Thank you

    Chris

    Unfortunately, Microsoft requires us to enforce their EULA in this regard.

  • Using the oracle same House for several database (configuration database)

    Hi guys,.



    I saw a few shops use the same Oracle_home to Multiple Instances of the database...



    Basically, they install binaries 11G or 10G once for example: /u01/app/oracle/product/10.2



    For the following database facilities they do not install the binaries... they just point the new home of the oracle database to what they currently have...



    for example



    cat/etc/oratab



    newdb:/U01/app/Oracle/product/10.2





    So I was wondering if someone could give me the right steps to do this or a metalink note...



    Thanks in advance



    Here's what I think below:



    Step 1

    Enter the new name of the database in/etc/oratab... pointing right oracle_home as below



    Step 2



    Use DBCA or scripts to create the new db



    Please, please provide the right steps or metalink note

    user569403 wrote:
    Hi guys,.

    I saw a few shops use the same Oracle_home to Multiple Instances of the database...

    Basically, they install binaries 11G or 10G once for example: /u01/app/oracle/product/10.2

    For the following database facilities they do not install the binaries... they just point the new home of the oracle database to what they currently have...

    for example

    cat/etc/oratab

    newdb:/U01/app/Oracle/product/10.2

    So I was wondering if someone could give me the right steps to do this or a metalink note...

    Thanks in advance

    Here's what I think below:

    Step 1

    Enter the new name of the database in/etc/oratab... pointing right oracle_home as below

    Step 2

    Use DBCA or scripts to create the new db

    Please, please provide the right steps or metalink note

    You cannot create a database without using the binaries already installed in an ORACLE_HOME. However, all THE databases are created in an existing OH. No matter if you have one or a hundred ORACLE_HOMEs, the procedure is the same:

    1 - set ORACLE_HOME, ORACLE_SID and path suitable for the new db. Of course, if you only have a single ORACLE_HOME, you would choose it. If you have more than one, you choose the one you think is appropriate for this new db.
    .
    2. create the db. You can use dbca, or connect to an idle instance and run scripts that you saved for this purpose. DBCA is a very good and very practical tool, but is not required. It's use is come with a few caveats.

    3 - update the oratab accordingly, if you wish (I always thought). Do you understand how and when oratab is used, and why I say update ' If you see is '?

  • How to: using the same control panel for several vi and reproducing change to the control panel.

    I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

    All controls in the control panel are in a bundle, so all values are passed to 1 thread.

    I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

    I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

    Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

    Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

    Have fun

    Ben

  • Is there a quick way to show the pixels per inch for lots of images?

    Each year, I need to send a bunch of pictures to a printer, and I want to ensure that all have a resolution of 300 pixels per inch. Check each picture one by one in Photoshop by Image = > Image size is a bit tedious. Are there quicker ways to display the setting ppp for a large number of images?

    David

    Not sure if you are on Windows or Mac, but if you use a Windows machine in Explorer details you can view the resolution.

    Just do a right click upward in the row that contains the column headings (name, Date, Type, etc.) from here if you go down to more it gives you a list of huuuuge of what it can display for you right there in Windows Explorer.

    I hope this helps, unfortunately, if you are on a Mac I can't help you =)

  • How do I programmatically load and show the façade of a vi but NOT run it?

    Is it possible to load and display the front panel of a vi but NOT run?  I start with the AsynchronousCallAndForget.vi from the example finder and inserted a node invoke with the Open FP method call before the starting node the asynchronous call. The vi that I'm loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thank you!

    Why do you use the asynchronous call? If you simply open the VI reference, then call the FP. Open method, it works very well. You can then call the VI run method which wait until is set to false if you want to execute asynchronously, it is how we did in ye olde days before we have this fangled tricks "Start Asynchronous Call.

  • I do not remember the username or password for several years when I bought a lot of music, how can I get hold of this information

    When I try to play some of my earlier music, a window opens saying that I need the license, but I don't remember my log in name or password.

    Hello

    ·          What application you use to play music files?

    If you use Windows Media Player, then check out the following link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-DRM-frequently-asked-questions

  • Using the account with pivot for several columns

    create table TEST_CASETBL (ID, NUM, TYPE, CREATED_BY, CREATED_DT) that choose

    1, 1-1, CO, ABC, sysdate-10 of all the DOUBLE select union

    2, 1-1, EO, ABC, sysdate-10 of all the DOUBLE select union

    3, 1-2, CO, ABC, sysdate-10 of all the DOUBLE select union

    4, 1-2, UPD, ABC, sysdate-10 of all the DOUBLE select union

    5, 1-3, CO, XYZ, sysdate-10 of all the DOUBLE select union

    6, 1-3, EO, XYZ, sysdate-10 of all the DOUBLE select union

    7, 1-4, CO, XYZ, sysdate-10 of all the DOUBLE select union

    8, 1-4, NT, XYZ, sysdate-10 of all the DOUBLE select union

    9, 1-5, EO, XYZ, sysdate-10 of all the DOUBLE select union

    10, 1-5, NT, XYZ, 10 sysdate from DUAL;

    I want to calculate number of NUM, County of different values in the 'TYPE' column based on the CREATED_BY column

    Expected result:

    CREATED_BY Count (NUM) Count (CO) Count (EO) Count (s) Count (UPD)

    ABC                                 2(which means 1-1,1-2)               2                   1                         0            1

    XYZ                           3(which means 1-3,1-4,1-5)               2                    2                        2            0

    Please provide your suggestions to solve the SQL query form

    Thank you

    Hello

    Melissacharlier-Oracle wrote:

    create table TEST_CASETBL (ID, NUM, TYPE, CREATED_BY, CREATED_DT) that choose

    1, 1-1, CO, ABC, sysdate-10 of all the DOUBLE select union

    2, 1-1, EO, ABC, sysdate-10 of all the DOUBLE select union

    3, 1-2, CO, ABC, sysdate-10 of all the DOUBLE select union

    4, 1-2, UPD, ABC, sysdate-10 of all the DOUBLE select union

    5, 1-3, CO, XYZ, sysdate-10 of all the DOUBLE select union

    6, 1-3, EO, XYZ, sysdate-10 of all the DOUBLE select union

    7, 1-4, CO, XYZ, sysdate-10 of all the DOUBLE select union

    8, 1-4, NT, XYZ, sysdate-10 of all the DOUBLE select union

    9, 1-5, EO, XYZ, sysdate-10 of all the DOUBLE select union

    10, 1-5, NT, XYZ, 10 sysdate from DUAL;

    I want to calculate number of NUM, County of different values in the 'TYPE' column based on the CREATED_BY column

    Expected result:

    CREATED_BY Count (NUM) Count (CO) Count (EO) Count (s) Count (UPD)

    ABC                                 2(which means 1-1,1-2)               2                   1                         0            1

    XYZ                           3(which means 1-3,1-4,1-5)               2                    2                        2            0

    Please provide your suggestions to solve the SQL query form

    Thank you

    This CREATE TABLE statement works when try you it?  Do you need single quotes around string literals?

    You may want something like:

    WITH data_to_pivot AS

    (

    SELECT created_by, type

    COUNT (DISTINCT num) over (PARTITION BY created_by) AS count_num

    OF test_casetbl

    )

    SELECT *.

    OF data_to_pivot

    PIVOT (COUNT (*)

    TO indicate the ("CO" AS count_co

    'EO' AS count_eo

    'NT' AS count_nt

    'UPD' AS count_upd

    )

    )

    ORDER BY created_by

    ;

  • Equium A300D: Software of the camera shows the last picture I took 6 months ago

    Hello

    Just started to use the built in camera on my Equium A300D after a long break (6 months). The software seems to work very well I see that it is in front of the camera in preview and everything seems good. However, when I press the snapshot button it shows the last picture I took 6 months ago. The video feature works very well!

    I uninstalled the software and installed the latest version but the problem remains.

    Any ideas?

    Ron

    Hello

    Sorry, but I really don't understand your problem.
    The last picture shows the cam that Vos took several months ago. And?
    It's a problem?

    I mean the image has been saved in the folder somewhere on the HARD drive and so you can see the photos, I guess that the images have not been removed and that's why they are still available.

    Is not a friend of the problem. Take a look in the webcam folder and delete the photos easy. Isn t it?

  • CC does not show the update of Lightroom 2015.6

    Hello

    MAC OSX 10.10.5 and I always have problems with the creative application of cloud.

    It does not start automatically, but it works. Many updates lately omitted by error 43 or something :-) to 9%.

    But now the App does neither show the update of Lightroom for my Canon 1DX Mk2 files.

    I connect to the computer.

    Tried a patch on the blog of the Queen for a direct download of Lightroom, but does not.

    What could I do now?

    DIRK best

    Update of Lightroom

Maybe you are looking for