Shows message as unread after being deleted

Similar Questions

• HP Officejet 4620: Network printer shows unable to communicate after being unused for 4 hours.

  Printer prints as it should after being turned on.  After being unused for about 4 hours but always enabled, when ordered to print the printer does not print and the computer displays the error "unable to communicate with printer."  However, if the printer is then turned off and then turned back on, it prints without error.

  There are a few possible solutions.

  1. Firstly - check if your firmware is up to date. (Firmware update instructions)

  2. make sure that your point of Wi - Fi networks firmware is up-to-date.

  ? -Is this wireless light (little blue light by the wireless button) stay on all four hours?

• How do you mark a message as 'unread' after opening it?

  After reading a message, there are some I'd like to mark as "not read" but I am unable to understand how do.

  Click with the right button on the message and select Mark as unread

  or

  There should be a column that is usually just after the column of the object that has a pair of glasses search icon. You can click on the point him corresponds to the message and change the State of the message read to unread.

• 'Photos is Missing' message in Lightroom after the deletion of the image files

  All my photos show the 'missing' message when I try to raise them.  Have you tried all the recommendations through the library, by clicking on the exclamation, etc..  Everything takes back me to my office whose photos have been imported originally, but have since been removed.  Any ideas?   I have 5.7.1, the update for which I just downloaded.

  Well Lightroom never stores the original image file in the catalog.

  It only stores the information on the w. (Rental, edicts, keywords, Labels etc) of the imported images

  If the original images have been deleted / moved that the images will go missing inside the Lightroom.

  I'm afraid that if you deleted the images, you will need to re import since the backup. If you still have a copy of the images.

  Thank you

• How to delete cookies from all the ' Do not Track ' placed in Firefox after I have uncheck "Do not Track" when they are all keep reappear after being deleted?

  I first checked 'Do not track' blindly that it would work. I am running FF 14.0.1. I do not accept 3rd party cookies. I demand to be informed whenever a cookie wants to access. Before that, I would normally check my cookie list to remove those that don't want to keep, after I closed the related tab. However, after checking the option, a multitude of cookies "do not follow" arose. They block my table. I spend too much time track the unwanted cookies. In addition, after unchecking the option, all those ' Do not track ' cookies remain unwanted. No mater what I do to remove them, even to excess 'Remove all Cookies', none of them stay deleted. Even if I have to 'Remove all Cookies' and immediately close FF, they ALL back when I restart FF again, even after the total shutdown of PC.

  The choice of the '-non-piste ' will that make Firefox sends a header HTTP specific (TSD = 1) on a web server and there is no definition of cookies.

  • Tools > Options > privacy > Tracking: "say I won't be the subject of a follow-up of web sites.
  • http://BrowserSpy.dk/donottrack.php

  This is the server to do something with this request.

  If you receive permanent cookies, which cannot be removed, then it is likely that you have installed an extension.

• Why my deleted e-mail return to my Inbox? Junk mail returns also after being deleted.

  After that I delete an email and continue in my next email I am now out of the E-mail when I click on something in my email. It has been a clicks. When I go back to hotmail, all my deleted email is back in my Inbox. Deleted spam is back in my junk e-mail folder.

  Hi SandyKlemick,

  The question you have posted is related to hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/

• Microsoft Mail rules continue even after being deleted.

  I created a rule to forward all emails from my yahoo account.  I then decided to remove this rule.  Mail was sent again to the yahoo account.  I tried to create the new rule and placed a stop before the rule hoping to fix the glip.  Yet all the emails are sent.  Any solution to this?  Many thanks to any willing to help Superman.

  What server are the messages coming on?

  If you send a message to yourself and that you close Windows Mail before you receive is on the Yahoo via Webmail account? If this is the case, it is a rule that you created on the server as a rule from Windows Mail to send a message would not work until the message has been downloaded to WinMail.

  Bruce Hagen ~ MS - MVP [Mail]

• How can I prevent the Thunderbird goes directly to the next message after you delete that I read?

  How can I prevent the Thunderbird goes directly to the next message after you delete that I read? I want to return to the list of all incoming mail, so I can choose what email I open then. I could see something that I don't want to open at all, but the way it is set up right now, it opens the following email automatically.

  Thank you. I don't want to download an add-on, so I tried the messages pane, and I guess it will do. I used Thunderbird a few years ago and he used to have an option where it would go after deleting a message during the consultation in its own window. But I think I can live with this option. so thank you once again.

• How to render the message displayed by the DB after a deletion?

  Hello
  
  I do a page which wil remove the values in a table. I want to display messages that oracle displays under sqlplus after a deletion, for example '50 lines deleted'.
  
  How to do?
  
  Thank you for your kind answers!
  
  Christian

  As mentioned in the previous post, can you please check if the branch corresponding to the process of deletion (under Branches of page) has the "message of success of process to include" enabled.

  Thank you
  Manish

• Notification of update KB960859 security guard recurring after being installed.

  Original title: KB960859

  Notification of update KB960859 security guard recurring after being installed.

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Stop

  (Stopping the service will take a moment)

  2 delete the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]

  Open the download folder and delete its contents

  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow scanning to

  full | Uncheck the box/deselect KB960859 and hide ("don't show me this update ")

  Once again").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Start

  (Starting the service will take a moment)

  UTC/GMT is 01:55 on Tuesday, February 21, 2012

• Vista will not open apps or to stop after being used for a short period (semi freezes)

  When I start the computer, everything loads normally and works very well for a while, usually an hour or two. But after being in use or left alone, I'm more able to open applications, including Notepad, Microsoft Excel, Firefox or even windows Explorer Windows. In addition, the stop menu will not be displayed. I can open the start menu, but nothing else inside, so I have to do a cold reboot every time.

  Excel is the only program that gave me any kind of error message, but it says there is not enough memory to run.

  I am running vista Home premium 32-bit with 4 GB of RAM.

  I also made sure to update all my drivers, most of my programs and even to reinstall service pack 2, but the problem persists.

  You've done a repair system/upgrade and the problem persists?  If this is the case, I sincerely doubt a clean install will do better (but he can and may be worth a try if it comes to that).  I'm now tempted to think of material.  We will check your hard drive and RAM:

  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  You can also test your RAM to http://www.memtest.org/.  If it fails, test each piece individually to find those who are bad and replace.  If it passes, the RAM is probably OK.

  Is the computer that runs particularly hot - y at - it part of it which causes the pain from too much heat so that you have to pull your hand?  The fan blows and he is blocked in any way (perhaps by a piece of paper or lint or something)?  You may need to open the case to check for this (unless it's a laptop, then just check to see if the fan is working and you can feel air blowing from the vent.

  After that, it of time for the computer repair technician to check the system hardware (NOT Geek Squad or one of these centers of department store, but a true professional) - but try following this section first to see if this is useful (and maybe try a pure install as a last resort).  The problem (if it exists) can be any number of things that you can't check yourself without special equipment spare parts (the motherboard, processor, power supply,...). Check around to find someone reputable.  Alternatively, you can return it for repair to the manufacturer (they have all the spare parts that may be required).  Find out the costs and quality of options and guarantees with the repairs and then to make your best choice.  Don't forget to backup your important data before send you it or bring it in - there is a pretty good chance that they will do something that will ask you to do a clean install even if it is probably not really necessary (but they are more interested in fixing the problem than the preservation of your data, programs and settings).  If you have a version of Vista that is capable of a complelte image backup that would be the best choice – you could just restore when they return from the machine and you will be right back where you were.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------

  If they test OK, then let's see what you have running on your system at startup.  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download and install Autoruns (which is a FAR superior to Vista msconfig program) and see what to load at startup.  I bet there are a lot of things, you really don't need but installed by the manufacturer when you installed programs (sometimes just so they will begin more quickly when / if requested).  Some are inportant as Windows Defender and your software AV - but I bet that most of them aren't and they use valuable resources running in the background without valid reason.  When I checked my own system I ended up remove about 90% of the items in the start menu - and the system showed an improvement notice in reactivity.  Don't worry, you can always start almost all of the programs in the menu all programs (or you can add controls to the items or create new programs that you actually launched at startup with Autoruns.

  The advice that Michael Murphy gave you already should have cleaned most of all what could be slowing down your system - and the repair/upgrade system took care of all the corruption in files on your system. I'm honestly not Kow nothing else to try (with the exception of the material option described above).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• E-mails do not remain "unread" after scoring their - Mail - iPhone6 - iOS App 9.3.1

  I often give a glance to new emails and then mark them as 'unread', in order to read them more carefully in the future.

  Since iOS8 I have problems with marking messages as unread in the Mail application.

  To be more precise, the emails are always correctly marked as unread when I do, although sometimes I find them automatically return to "read", after a few minutes.

  It's not the first time that I ask for help on this forum and I was not able to solve the problem.

  I use Hotmail and Gmail and both accounts have this problem.
  I'm starting to think that the problem is related to the "low power Mode" (which I turned on almost 24/24), although I'm not entirely sure. It could be that in this mode, the device refuses to update the background applications and if the State of the (/ unread) email has not been communicated successfully on the server until the Mail application is 'closed', it cannot be changed.

  Thank you

  You could possibly have the answer to your question-

  The description of low-power States that

  What is the low power Mode

  Low power mode performs a number of actions to save the battery power. It changes some settings automatically to save the battery, turn off auto fetch new messages, lower your screen brightness and automatically lock the phone and turn off its display more quickly. Apps can detect in low power mode is enabled and choose to disable animations and other characteristics of the battery-hungry, too.

  So you could be right - when return you to a normal power - read status gets pushed again because the unread was never disclosed on the server

• Pavilion G6 2302 ax battery cell no. 4 tension showing o mV even after charging is complete.

  Hi guys,.

  My Pavilion g6 2302ax cell no. 4 battery voltage showing o mV even after a full charge.

  I baught my laptop 2 months before and its hardware works very well so far, I've noticed this problem. I've attached a screenshot of the HP support assistant screen. Please take a look.

  

  If anyone has an idea about this help please.

  Hello dipuab,

  Your battery test shows 0 on the fourth cell.

  There is nothing wrong with the battery, the test is designed for only three of the battery cells, test one of the tests will display 0.

  Here is a link to another post that had the same problem. Message 7 of 7.

  Hope it will be useful.

• Error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. Unplug all printers on this port, and then delete this port.

  Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?

  I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc

  Hello Apollo,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.

  Perform the steps in the link to uninstall Redmon.

  http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39

  Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Screen becomes black after being left idle only recourse is to turn off the power

  Our screen goes black after being left idle for some time.  The only recourse is to turn it off.  The keyboard does not (without CTRL-ALT-DEL).  I tried to return to the previous registry spot without success.  Any ideas?

  Hi Flair24,
   
  -Have you made changes on your computer before this problem started to happen?
  -Set the screen saver vacuum? If so, change the screen saver to another and check if this might be the cause of this problem.
  -Do you have any particular power on your computer(sleep/hibernate) model?
   
  For more information, see:
  Change, create, or delete a power plan (scheme) 
  Post back with more information to help you help the better.