Shredder.msi problem starts

Similar Questions

• Shredder.msi - where can I get it back?

  My setup requires this file and will not continue without it. There is no shredder.msi on my laptop Acer Aspire under Win 7. Where can I get shredder.msi?

  Hello

  1. Is there an error code or the message that if displayed when the program fails to install?
  2. What program are you trying to install?
  Try the methods provided and check whether the problem is resolved
  There may be some non-Microsoft service that causes a conflict for the problem to occur. Perform a clean boot and then try to install the program. Check out the link and follow the steps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once the diagnosis is made, follow step 7 of the article so that the computer can be configured to start in Normal startup.

• I get an error message, "there is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll ".

  Hello

  whenever I start my pc, I get this error message:

  There is a problem starting C:Users\ (my name!) \Appdata\local\temp\uacavi,dll

  I recently purchased RegCure Pro for fix my registry and its still not fixig the problem.

  Help, please

  Original title error message.

  Thank you

  Well, you shouldn't have wasted your money on a registry cleaner - they are dangerous to use if you don't know what exactly is the cleaning of your registry - and if it is safe to remove the discovered or not registry keys.

  OK, so just fix it-

  Press Windows key + R > type msconfig in the box run > Enter. In the System Configuration window, select the Startup tab.

  Now, uncheck an entry > OK and restart. If the error message is gone, leave it as it is. If the error message still appears, open System Configuration > start again tab. Now check the entry you previously unchecked and uncheck another. You do this to know what entry causes the error.

  Make work easier, you should not try unchecking and check all entries beginning with the following words in their names.

  Microsoft, Adobe, Intel, (your company produces antivirus developer), Java, Synaptics and (the manufacturer of your computer - HP, Dell, Sony, MSI or anything else).

• SE error message: "Run"DLL"there is a problem starting. C:\Users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

  Get the below error message every time I start my computer:

  Run DLLS
  There was a problem starting
  C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
  The specified module could not be found.

  Hello cuefox, thank you very much to judge me.
  We're here to help.
  Continue to browse the web with Firefox, thanks once more.

• Printing in 2 programs problem started 2 days ago, only firefox works fine with Internet Explorer?

  Services Bank web site has a "Print - Friendly View" text, on the top right of the page that displays the account information in a different format if you click on the text. Printing all other functions work ok. The problem isn't when you use them Internet Explorer. The other program is on the Aflacs website, and the problem is very similar. When I click on the text stating "Print copy of invoice", nothing happens, as the text of the Bank. Both work perfectly with Internet Explorer. The problem started about 2 days ago. When it works well, a window will open and show you what it will print and you click on the text "print", and it prints. Any help on this problem will be greatly appreciated.
  Thank you
  Joe Anderson

  You have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

  My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Qosmio F60 - hibernation of freezing and problems starting

  Hello...

  The problems started when my computer goes into hibernation mode and when I press the power button to launch once again, it remains frozen.
  I then press the switch to turn on it works again.
  Option just to start normally or in safe mode.
  Either way comp freezes in the middle of loading and I must push the switch down to the Tower model

  Then the new restart msg saying there is a problem in the start menu and asks me if I want to solve the problem
  I click Yes and a number of things have happened several times:
  (1) computer sets and loads normally
  (2) computer says he can not solve the problem and continues to load correctly
  (3) the computer freezes in the middle of loading or during the process of setting
  (4) computer sets and restarts but crashes in the middle of reloading

  I often have to go through this time half a dozen before I can load normally

  either way my norton antivirus has been come with messages saying I need to reactivate (my subscription is not exhausted) or an error has occurred
  have done a full virus scan - none found

  is this a virus problem? I do a system restore? any other advice?
  help much appreciated

  Hi kkle4,

  You use the preinstalled version of Windows 7 in Toshiba? I can t find any information in your posting on OS :(

  Otherwise I agree with Akuma and you should check the BIOS version and probably an update would be useful. Before you begin to update of the BIOS here are some useful tips:
  -Close all running programs (also, antivirus, firewall, etc.)
  -Make sure that you are logged on as an administrator
  -Unzip all files from zip archive
  -Connect the AC adapter before you can update the BIOS and make sure the battery is fully charged

• Problem starting Equium L40

  Hello

  I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

  The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

  I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

  Maybe there is a battery backup I can change to fix the problem?

  Any help would be appreciated?

  Hello

  Laptop should also work without battery but connected to the power adapter
  So I guess that your motherboard is affected in some way.

  If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

  However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

  Check it out!

• HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  BULLDOG2U wrote:
  

  . On each startup, I get this message.

  "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

  Can someone tell me where to find this file?

  Thank you - BULLDOG2U

  You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

  To remove this item from your startup list, follow these steps:

  System (Windows 7) Configuration utility

  1. In the start search box, type MSCONFIG and press ENTER.
  2. Click the Startup tab.
  3. Uncheck the items you want to run at startup.
  4. When you have finished your selections, click OK.
  5. In the box that appears, click on restart to restart your computer.

• Re: Problem starting L300

  Hello. I'm having a problem starting my L300 - it works very well up until now and has suddenly developed this problem.

  When turned on it, - very slowly - boots for the logo toshiba with the message "F2 for the Setup utility, F12 for Boot Manager" standard, but does not spent there - if left for a while it's just back to the blank black screen, the cursor in the upper corner of flasher for turn a little and then out. F2 or F12 do anything.

  Anyone got any ideas, what could go wrong? :(

  Hello

  Sorry, if I do not understand you correctly. You have a message like, Manager of boot is damaged?

• HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

  I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

  Hey @SteveJG,

  I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

  1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
  2. When the splash screen opens, type computer (can show that This PC)
  3. Click on the computer (or PC) to start the window
  4. When the computer window opens, click on the Drive C
  5. Click on users
  6. Click on your user name
  7. Select AppData
  8. Select roaming
  9. Select Microsoft
  10. Select Windows
  11. Select the Start Menu
  12. Select programs
  13. Finally, click Start
  14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

  Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Lenovo X 230, CustomEventMonitor.dll 'there is a problem starting'

  Dear Sirs,

  Just after the connection of Win10, I begin to get this error message. How to solve this problem?

  'There is a problem starting'

  and right under "is not a valid Win32 application".

  Here's what it looks like - error

  The answers will go,

  Thank you

  
  

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• HP ENVY 15 J109TX: Problem starting Windows HP Envy 15 J109TX

  Hello

  My laptop has a problem starting the OS.

  Same recovery does not work.

  I gave to the service center for repair they me contact number of drive recory.

  So, I called the 1800112267 number, but they told me to contact the Service Center.

  The one you suggest how I can fix it.

  BONES recovered by the service center!

  Don't know how!