Shuffle stops itself

Similar Questions

• MacBook Air keeps stopping itself and gives a report of Panic CPU. Repair warranty or fixable?

  My MacBook Air keeps stopping itself, when he is asleep, or even using active? Some big long panic report arrives and I have no idea what all this means, what's wrong with it? She did this 4 or 5 times a week for 2 months now. I read here similar questions but do not understand the answers. It is almost always plugged in power, my 2 year warranty is updated until August 2016, 6 months ago, the motherboard has been replaced and told me that it looks like new. So what's happening? I need a repair under warranty again? I tried to copy and paste the report but I get a message saying that my question has invalid characters?

  Check if your MBA has had a kernel panic.  If so connect and confirm it with these instructions:

  https://support.Apple.com/en-us/HT201753

  It can be a clue to your problem.

  Ciao.

• When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again.

  Original title: My computer turns off too soon. How can I change this.

  When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again. It's very frustrating. I want him to stay that I can continue to run a program that converts formats. When she stops formatting stops. How can I change the system to keep it set.

   

  Hello

  1. what operating system is installed on the computer?
  2. didn't it closes completely down or will he sleep?
  3 did you changes to the computer before the show?

  It could be due to food or an electrical problem in the PC.

  Method 1: Open the troubleshooter of power
  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

  Method 2:
  Step 1: Check the Safe Mode issue.

  Reference:

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

• ITunes does not recognize the songs and the old shuffle stop at 30 seconds

  I have an old shuffle, 1 MB, maybe a 2nd gen, gold (A1204 EMC). iTunes (iOS 10.11.4 12.4.1) has problems with the shuffle. He quickly recognizes the shuffle, which appears as a mounted device and on the desktop a moment, then it reports that there are no. The shuffle disappears from the desktop and I get a warning saying that it has been deleted without eject.

  ITunes then freezes and I have to force quit.

  I can charge the shuffle, but when I go to listen to the songs, they last 30 seconds or less, the following starts then and in about 30 seconds, it will stop followed by another song.

  I tried to reset (turn on, turn off for 5 seconds and turn on) several times but nothing changes. I tried to erase using disk utility (15.0). The shuffle will not disassemble process works.

  All of the suggestions. My 2009 iPod Touch works better than this most recent shuffle. I like to use the shuffle when you do yard work.

  Same thing happens when I try to sync the shuffle using a snow leopard starts.

• Windows XP Prof. SP 3 stops itself

  I have Windows XP Prof SP3 and after I downloaded the latest updates for my computer to stop himself, then starts by itself. This happens not all the time. What is happening and how can this problem be fixed? Thank you.

  Thanks for the reply. There was a lot of warnings & errors in the application & system in Event Viewer. I didn't want to waste his time with respect to the system. I took my computer to fix. Result - spyware. Everything is fixed. Thanks for all your time and effort in this case.

• Frozen contacts after iOS 10.0.1 update on the iPhone 6 s and sometimes phone stops itself

  Hi all

  My contacts sometimes freeze (when I search a contact) and I have to force to leave contacts/phone to re - use the contacts/phone app. This has happened only once 10 update iOS. My phone also sometimes just suddenly stop (that too after the update!) It has happened twice already. The battery was more than sufficient when it happened.

  Any ideas?

  Kind regards

  Harris

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Windows installation interrupted as Equium A300D stops itself

  Hi all

  I've had my Toshiba Equium A300D for 2 years now. Meanwhile, it works normally, sometimes stops himself maye because it was too hot.

  Recently, he tried to install updates to Windows Update, but never successful. I left the computer to update all night and there was 2 of 12 updates... all the time so I always had to shut down the computer by pressing the power button.

  I was unable to change the setting to update Windows automatically, because every time I tried to do it froze. Most of the other commands became even viewing photos that do not meet.

  It was until my computer could not connect to a certain wireless network, while other devices may I decided to reinstall Windows completely. He was installing normally but it got too hot and the computer closes again!

  I tried to install again and he was arrested again, but I got up in the final phase of the game when I turned it on again, it was always 'finihing the installation may take several minutes. lease do not interrupt or shut down the computer. Let him over several hours, but he did not move to a different stage. Before the computer shuts down, I think I arrived at the scene after that.

  I tried to press F8 to start a new installation, but he's only got in this screen.

  What can I do?

  Please help me! Thank you very much in advance!

  I am in Germany at the moment, but I live and I bought this computer from the United Kingdom.

  ttd500

  Hey,.

  You can test Windows with Toshiba Recovery disk installation, please?

  The disc usually contains only drivers and software prétestées so installation shouldn't t be a problem because it s pre-tested software from Toshiba.

• Satellite A205-S5864 - stop itself and the slow performance

  I'm new to this forum, so help me out anyway you can.

  I noticed that my Toshiba laptop showing odd behavior lately. She recently began to stop himself suddenly without warning. We arrived at the point where it is a regular occurrence. I don't know what it is, if the computer is starting to show it's age, or a hardware problem, etc.. I hope that's not die because this computer begins to happen over two years. The computer knows that he was arrested not because I get the message that this was not decommissioned and how I want to start in.
  I also noticed that, even though I have a core 2 processor, the computer takes awhile to start. I don't know how to improve the performance, because I regularly clean the registry and trash. I have norton 360 along with spyware blaster.

  any input would be appreciated. I will post more details that are necessary.

  Hello

  I m not A205 owner but on my computer Toshiba laptop, I got the same problem it stops and the reason was a higher internal CPU temperature. So I ve looked in the forum and founded an interesting article on the cleaning of a Toshiba laptop. That's why you need compressed air and you can clean without disassembly.
  Check this box!

  Your slow performance it of difficult to say something on this issue, but in most cases it s advisable to reinstall Windows.
  In my opinion the Norton antivirus slows performance a little so I m using the software tool free AntiVir.

  BTW, did you remove Toshiba TEMPRO?

• Satellite A300D - overheating issue and it stops itself

  Hello

  Computer: Satellite A300D (PSAHCE)

  Bought my A300D two months ago. It was pre-installed with Vista, which, unfortunately, after a while, became so slow, that it was impossible to get anything done. So I decided to install Windows 7, the other day and it worked like a charm. Except for the fan stops after about 1-2 hours of work. Even if the temperature exceeds 60-70 ° C. The computer stops at about 80 c.

  I do not understand why the fan stops working.

  So far, I have tried the following: I tried to clean the fan with compressed air.

  I read this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46796&tstart=0 on an update of the BIOS, but the one I found, dated February 09 is the same version I already have. Are there any new?

  I read this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46117&tstart=105 that connects this http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm guide where there is something called Toshiba Power Saver Settings. I searched for her to Toshibas support center, but it can not be found for my model.

  I tried using Speedfan freeware without results. I work as a developer, and I only have my netbeans IDE and Spotify ongoing enforcement, even if the computer gets hot after about 1.5 to 2 hours of work because the fan stops.

  Anyone have any idea on how I can solve this or something else I can try?

  I forgot, I also put the cooling system active strategy.

  Hello

  If I understand you correctly, this happens only on Windows 7. Is this good?

  If so, you should go back to Vista or let's say the factory settings. I assume you are using Windows 7 beta or Release Candidate, and this isn't an official version of Windows. In addition Windows 7 isn't on the market and there is therefore no support of official rider for the time.
  Maybe Windows 7 peut t control the fan settings correctly.

  But this problem could be caused due to a third-party display driver. Then you should try the display driver for Vista on the Toshiba site, maybe it helps

  Welcome them

• Why my laptop stops itself when a documentary of netflix play?

  My laptop stands on a flat surface and metal.  When a documentary play, it stops between 9 and 25 minutes into the program.

  I guess your Power Options have not been set to turn off or put your mobile PC to sleep after so many minutes of "inactivity".
  Control Panel-> Power Options-> (tab) power management.

  If it's a complete power off (not standby) and suddenly stops without making the 'appropriate' stop, then this could be indicative of overheating RAM or bad.  Overheating is usually caused by a gradual accumulation of dust sucked by the fan through the computer and can sometimes be solved by blowing compressed air into your computer.  The freeware 'CoreTemp' app will give an indication if this is your problem.  Other indications of overheating are that your computer fan works high speed most of the time (or the fan not working do not at all).

  Microsoft has a diagnostic program to check the RAM.  You can try it in case your RAM is the cause of the crash.
  "Windows Memory Diagnostic".
    <>http://oca.Microsoft.com/en/windiag.asp >

  HTH,
  JW

• Shuffle stopped working on 8 GB Clip

  Bought my new 8 GB clip, a month or two ago and it worked perfectly, including the shuffle function, until I put a few additional albums on the player.

  Now when I use shuffle it will be only random between the tracks on the album that is currently playing. This happens for all the photos if they are albums that I have loaded for the first time to the player or subsequent albums.

  It's getting a little frustrating so hopefully someone here can help me put this right.

  For the record, I tried to reset the player via the levant of the power on button for 10 seconds, but it made no difference.

  PeteJayes wrote:

  Bought my new 8 GB clip, a month or two ago and it worked perfectly, including the shuffle function, until I put a few additional albums on the player.

  Now when I use shuffle it will be only random between the tracks on the album that is currently playing. This happens for all the photos if they are albums that I have loaded for the first time to the player or subsequent albums.

  It's getting a little frustrating so hopefully someone here can help me put this right.

  For the record, I tried to reset the player via the levant of the power on button for 10 seconds, but it made no difference.

  If shuffle is activated, then you must select 'play all' instead of playing just one album. -What are you doing?

• Help with DMA2100-CA. Media Center stop itself.

  Hello. This problem started 2-3 weeks ago. When I go to the "videos" section in Media Center on my TV, try to select a file to play, a message will appear 'Media Center stops'. Then he goes to the logoff screen and stops. The Media Center to reboot, it goes to the screen to reconnect. Once reconnected, Media Center again, but still the same problem.

  Funny is that she will play some files and not others. All files are technically the same Xvid avi. Some files will play with no synchronized sound and some will break Media Center as soon as I select them.

  Online TV works fine. Photos and music work very well.

  Help, please

  Hello

  Now that you mentioned that the MediaCenter Application on the PC has a problem too, then this is the source of the problem. If the MediaCenter Application on the PC hangs even without the DMA2100 lit, then something has gone wrong with the application on the PC and that the error is to be cascaded when you use the DMA2100. As mentioned earlier, you might really need to do a system restore to the time where you don't have yet of all the errors on the MediaCenter Application or you can find the exact Windows update that causes the issue related to the MediaCenter Application on the PC and remove/uninstall it.

  On the link of the forum below, he mentions that the MediaCenter Application breaks down can also be caused by a CODEC that has been installed or even drivers for the video card.

  The Greenbutton

  I hope this helps.

• Win.Vista does not boot.hd charges up to a point, then for a split second a bluescreen apears and it stops itself.

  Win.Vista does not start. HD charge up to a point, then for a fractio of second bluescreen apears {no time to read} and he stops himself. then he tries to start again alone. This cycle goes on and throughout the day so I do not unplug the device. I don't have a win. recovery disk. can I do about it? Thank you for your support

  Hi adiroya,

  You have made no changes to the computer before the broadcast took place?

  Disable automatic reboot and capture the exact error message.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 1
  Step 1: see if you can boot to the desktop in safe mode by disconnecting all external devices except the keyboard and mouse.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to boot to the desktop, perform the clean boot.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2
  If you are not able to boot to the desktop in safe mode, then try last known good configuration.

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

• When you try to watch Netflix, my Windows 7 computer keeps stopping itself.

  This often happens when I'm watching netflix.  I checked all the addons, and there is nothing suspiscious.  Please help me!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

• Dell stops itself then starts up again

  Dell computer closed when idle and then automatically starts again.   If I stop it automatically turns on again immediately.  All ideas

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that you have a stop down and restart the issue on the Dell computer. I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. what security software is installed?

  2. don't you make changes to the computer before the show?

  This problem can occur if there are some problems with the power on the computer, or if there are some inconsistencies in the system files related to power management. Follow these methods:

  Method 1.

  Open the power Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Power-troubleshooter

  Method 2.

  You can create a new power plan and check the status.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-us/windows7/power-plans-frequently-asked-questions

  Method 3.

  We can refer to this article and check if that helps.

  Change what happens when you press the power button on your computer: http://windows.microsoft.com/en-us/windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Method 4.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.