shutdown dump and computer data

Similar Questions

• shut computer down, restarted my time and the date has changed

  shut computer down, restarted my time and the date has changed.  My date always gose for December 31, 4001.  Goin whats?

  Hello
  Date and time incorrect after restarting is usually the result of a dead of the CMOS battery. You may need to contact the manufacturer of the computer for help on this issue.

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• Incompatible control file and the data after the backup files

  The company that I work has servers where some components are new more, so have a backup in the event of hardware failure. If we intend to do some clones of 1:1 of the current servers to change them in case of emergency. As most of the necessary data is not volatile and we reset stuff in any case, there is no need of replicaton, replace an old version of the database works very well. Now we could not easily get substitutes for our old material, so we had to set up new machines. And that's where my trouble starts, because now I had to actually set up the system and the database rather than do a simple copy of byte to byte. I'm mainly a programmer, using Oracle of 'other' side, but as our DBA is yet to come and the work must be done now...
  
  So I did some reasearch and decided to do a normal backup of the cold. I have dumped the controlfile, copied data and configuration files to the new server and read the prompt SQL (no mistake there) control file. After some initial hiccups with the system (memory, etc.), I was finally about to start the database, only to get an error ORA-01190 ("1 database or control file is from before the last RESETLOGS").
  
  I guess I did is a bad thing when you restart the database (used the wrong part of the control file) or when the copy of the data. The original data have split two readers for simplicity and logical, I copied their entire contents. So maybe I don't not copied to little but too?
  
  As I said in the introductory paragraph, I'm not a DBA, but I'm willing to learn and listen. I don't expect a complete solution, but some guidelines when to look and what to avoid. Any help on this would be appreciated.

  Currently, there are some points need clarification,

  1. you don't need to re-create the control file, if you have a clean shutdown database and copied all the files at the same time (data files, control files etc.)

  2. If you stop DB, copied files of data but do not copy the control at shutdown file, you must re-create the control file.

  3. the error ORA-19909 suggested you resetlog prior to recovery.

  ORA-19909: string data file belongs to an orphan incarnation
  Cause: The data file specified has been restored from a backup that was taken during a period of time that has already been abandoned by a resetlogs operation or Oracle cannot identify what incarnation of database file belongs. The alert log contains more information.
  Action: Restore a backup of this file that belongs to the current or a previous incarnation of the database. If you use RMAN to restore, RMAN automatically selects a good backup.

  4. it would be better that again follow you from scratch the article.

  for example,.

  Copy the files you did copy over the data base to the bottom of the old server,
  modify the control file creation script

  RECOVER DATABASE USING BACKUP CONTROLFILE;
  ALTER DATABASE OPEN RESETLOGS;

• Re: Satellite L300 - 11G - Configuration and other data is not displayed

  Hello. I have XP on my computer and I have problem with wireless card.
  All drivers are kept for the card but in the configuration utility of the wireless MAC address client and other data are not displayed.

  Can someone help me?

  Hello!

  To be honest I don t understand what you want.
  Maybe you should explain this better.

  The configuration as the IP address and MAC address, you can see in the command line. Start-run-cmd-ipconfig/all online online online

  Good bye

• How to change dyou from Korean to English and time date thing dones t work is English version 1.0 of the right way to do it on a wiodows xp home

  How can we change from Korean to English and time date thing doesn t work is English version 1.0 of the right way to do it on a windows xp family

  Hello

  Refer to these...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/how-do-you-change-Korean-to-English-please-help/0adfb674-886d-440d-8a86-37adcb9a305b

  It comes to English instruction to change the regional language. This will not change any Korean in all English unless your computer is running XP Pro Corporate. The only way to change all Korean at all English is by reinstalling Windows with the English version.

  http://www.computing.NET/answers/Windows-XP/Windows-XP-language-from-Korean-to-English/178270.html

• Will not let me delete a file, it just keeps opening and downloading nothing and computer frezzes

  Need help suddenly onto computer called ntuser.dat she says corrupt usually open, but it keeps opening and computer frezzes his in document and settings, and then in my folder by name I have tried everything to remove it, but can't get rid of it messages error says cannot delet used by another program, but it's not and so I need to know how to get rid of.

  Thank you

  Hello

  
  1. have you done any software or hardware changes on your computer before this problem?
   
  NTUSER. DAT contains the custom settings of the user for the majority of the software installed on the computer, including Windows itself.
   
  Method 1:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747 
   
   
  Method 2:
  
  Check out these links to create a new user profile and check if it works.
  
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783
   
  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151
   
  Hope the information is useful.

• I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  I get a message saying "you have exceeded your profile storage space. Yet all the files listed th are actually my docs and application data. How to delete my profile, but not from my pc? increase the max profile size

  1. the first thing to do is to make sure that the computer is completely virus/malware-free. Googling around this error produced quite a few links where the posters were or had been infected with Spyware Protect 2009 rogue.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Once the scanning is complete (do not skip the preparatory stages no more), if the problem persists:

  2. double-click on my computer, right-click the icon for your hard drive, click left to get its properties. If you see options to set Quota management make sure that they are disabled.

  3. in the case - BUT ONLY AFTER YOU ARE sure THAT THE MACHINE IS MALWARE/VIRUS-FREE - copy the lines between asterisks (not including the asterisks) below and paste it into Notepad. Save as undopolicy.reg somewhere, you will find. And then double-click the .reg file, that you have just made to melt in your registry. I hope that this will take care of the issue.

  *****
  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  'EnableProfileQuota ' = -.
  'ProfileQuotaMessage ' = -.
  "MaxProfileSize" = -.
  'IncludeRegInProQuota ' = -.
  'WarnUser ' = -.
  'WarnUserTimeout ' = -.
  *****

  MS - MVP - Elephant Boy computers - don't panic!

• MCAFEE UPDATE LAUNCHER has been closed. To help protect your computer, Data Execution Prevention has closed

  MCAFFE UPDATE LAUNCHER has been closed. To protect your computer Data Execution Prevention has closed McAfee update Launcher. A proglem caused this application to stop working correctly. What should I do? I'm not savvy in computer science. Thank you.

  Hello

  1. Once you get this error code or error message?

  2 have you made changes on the computer before this problem?

  3 - is the problem confined to the McAfee update Launcher?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and check if the problem persists.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try to uninstall McAfee using the removal tool, and then reinstall and check.

  Consult this link for uninstall McAfee of McAfee:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Hope the information is useful.

• my ex loaded my computer data on his USB stick can it access my computer from his computer?

  my not my ex husband is bitter about the divorce.  He put my computer data on a USB key, it took him several days to do this, it is geek.  I have an icon on my desktop (lower-right on bar) that says USB manager and turned the RED yesterday. the two are connected and it is able to access my computer?  I think I am spied by him through my computer and I need to take action if this is the case.

  Hello

  "He put my computer data on a USB key, it took him several days to do this, it is geek.

  It does not take many days to put your data on a USB key.

  All we can offer is that you save your data and reinstall the operating system.

  If you continue to think that it spies on you, contact your local agency.

  See you soon.

• Calendar Windows Sidebar gadget is orange and no date

  I have a HP IQ506.  When I'm in my screen, the windows sidebar calendar comes with the computer is visible but is orange and not dates.  When on the screen of my husband, his calendar appears as it should.  How can I get my calendar to show up properly?  Help, please.  I'm so frustrated by such a stupid gadget.

  If it's just the calendar gadget that gives you trouble, you should be able to simply re - record a single. DLL to rectify a calendar gadget that looks like this,

  
  First remove the calendar gadget existing, and then click Start or press on the key and type cmd but don't hit. Search for CMD in the list above and right-click and select run as administrator. Provide the credentials if necessary.

  The open command window, type.

  Regsvr32.exe vbscript.dll
  ... and click on . You will receive a popup confirmation as follows,

  

  Restart the computer and add the calendar on the desktop gadget. It should now work as follows,

  

  If the gadget still does not work, you can try a much more aggressive approach to my solution on this page.

• import and export data?

  Hi all the language!
  can someone guide me how to import and export data? would be greatly appreciated and thanks in advance
  I use windows xp Service Pack 3 and database version 10.2.0.1.0
  
  Sarah
  
  Published by: SarahSarahSarah on August 14, 2009 14:30

  Hi sarah,.

  Try like this, symbol of $ use prior to export and provide the path for the data to be dumped in.
  SQL > $exp scott/sara1 leader = D:\emp.dmp log = D:\emp.log tables = emp rows = Yes indexes = no

  The code above makes the table emp data exported to D drive.

  Hope this can help u.

  Geeta-

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

  The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

  None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

  Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

  Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
  If this is not the case, can you?
  If so, make a copy and save this folder just in case.

  If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
  Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
  But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

  View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

  Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

  Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

  With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
  Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

• Error of Facebook, what can I do? Resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-Jetpack/qclean-remove-Facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  Facebook maintains the gel, a problem caused by this script resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-jetpack/qclean-remove-facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  I tried many solutions suggested, nothing works. Please advse. Thank you.

  Ed

  Hello ed, this error is caused by the qclean addon that you have installed. Please disable or delete or report the problem to the author of the extension...

  Disable or remove modules