Shutting Down when editing


I have Adobe Photoshop Lightroom 5 and while I'm the photo editing, the program will stop.  I tried to reinstall, but it still happens. I don't have the graphic processor of performance/preference/use, so I don't know what to do next?

Try to delete your preferences file

https://helpx.Adobe.com/Lightroom/KB/preference-file-locations-Lightroom-5.html

Tags: Photoshop Lightroom

Similar Questions

  • Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

    The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

    Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

    Hello CaptainKAG,

    Thanks for posting on the Microsoft answers Forum.

    I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

    Click here to post in the Forum Office.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Why my laptop restarts automatically after shut down when connected or not connected

    Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

    Hello

    Thanks for posting your question on the Forums of community of Microsoft.

    I would be grateful, if you can provide us with the following information to help us better understand the question?

    1. have you made changes on the computer before this problem?

    2 you receive error messages or codes to the computer restarts?

    I suggest you to follow the below methods and check.

    Method 1: perform the clean boot.

    Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

    Reference: How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

    If the problem persists, try Method 2.

    Method 2: System File Checker.

    You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

    Use the System File Checker tool to repair missing or corrupted system files.

    http://support.Microsoft.com/kb/929833/en-us

    If the question did not resolve, try Method 3.

    Method 3:

    You can view the steps proposed by cavehermitt in the following link:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    Hope this information is useful. Please let us know if you need help with Windows.

  • Why my computer shuts down when I click both don't turn off computer buttons?

    My computer is an IBM Thinkpad T42

    Today, when I clicked on the button start and then disable the turn off computer button, the computer of the computer and then selected button would not be closed to low or off. Any ideas why it would not be arrested? Any ideas how to get it to close help to disable the buttons on the computer?

     I have can stop him by the on/off switch.

    Thank you

    Henry

    Hi Henry,.

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, you are not able to stop the computer.

    This problem occurs if you install some versions of Norton Antivirus 2003.

    Perform the steps from the link below and see if it helps.

    You cannot log off, restart or shut down your Windows XP-based computer 

    Hope this information helps.

    Answer to us if you are having problems with shuts down the computer or any other problem of Windows, and we would be happy to help you.

    Good day!

  • Response of mouse slows down when editing

    It is a continuation of a discussion dated dated August 21, 2011 16:26 with suggestions of Bill Gehrke and John Smith, who has recommended how I could speed up edition and made my PC i7 and suggestions to solve the slow response of the mouse .

    My problem:

    After that several clicks of the mouse, the first quick reactions from first Pro CS5 are starting to slow down to a crawl.

    My PC:

    -ASUS P6TWS Professional Motherboard

    -Intel Core i7 920 CPU

    -12 GB OF DDR3 1333 RAM

    -4 HD 1 TB

    -Video card ATI RADEON 4670 1

    -Coolermaster 690 case separate real power 700W

    -LG BlueRay writer

    -Microsoft Wireless Laser Keyboard 6000 v2.0

    -Microsoft Wireless Laser Mouse 6000

    Recommendations:

    1. Disable indexing on your hard drives.
    2. Try wired keyboard and mouse (old style, no USB) with the generic driver for Win7.
    3. Try disabling the two security programs.
    4. Do not use boot drive for what anyone (editing wise) but the OS and applications. Sale video project and media on another quick of HDD or a table.
    5. Try another (more recent AND older) driver for your ATI card.

    Status of the above numbered items:

    1. Indexing is disabled on all drives used for video editing.
    2. The Asus P6T WS Pro motherboard has a combo keyboard and mouse PS2 Connector.  I was trying to use an old PS2 Keyboard and mouse PS2 to replace the Microsoft wireless keyboard/mouse.  This would require a PS2 PS2 male/2 female adapter.  Information on the Internet shows that there is 2 pins to spare on a standard PS2.  These 2 spare pins are used on connectors PS2 combo for the mouse clock and data which I assume is the case for the ASUS motherboard.  This requires a special adapter where regular clock pins and the date the female to PS2 Keyboard and pins of alternatives to the female to PS2 Mouse.  I couldn't so far find such an adapter.
    3. I need to use the Internet for updates of program so I would disconnect the LAN to disable security for the trial.  If security is the issue, I guess it would be to disconnect the LAN and disabling security whenever I'm editing video.
    4. I have 1 TB disks 3 other than the boot drive, one for each video source, audio source and output rendered.  I think that the reader audio source would be best to share with the project file because the audio files are not as demanding on the CPU if treated earlier in Soundbooth.
    5. I'll try different drivers.

    As recommended, the first Pro Benchmark I ran against my i7 PC to conclude that performance was close to the other similarly configured PCs. This confirms that I am dealing with problems of the outdoor unit.  In this case, the interaction of the mouse when editing is the likely suspect.  I'll try a second run after the changes.  I don't know how the files originate in the testbed among my 4 hard drives so that the results may not indicate a better distribution of readers.

    Does anyone can tell where I can get a combo reliable adapter PS2?  Do not share the drive audio source with the project file a better choice than the readers of rendered files or video source?

    John

    > solved by replacing the laser mouse with a PS2 Mouse Wireless

    Just guessing here... but my 'better thinking' is that your problem is not the material of the mouse, but the the mouse software that created the wireless link was not totally compatible with 'something' in Adobe software

    Another option could be a USB mouse

  • My computer shuts down when not used how can I stop this?

    What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

    What should I do to keep my computer of shuttting down when it is not used for a while? Vista is what I have.

    ==========================================
    See the following articles:

    Change, create, or delete a power plan (scheme)
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

    Disable on Windows 7 or Vista power management
    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

    Management of power (Windows 7 and Vista) Options
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00825528

  • What could cause my computer to shut down when choosing the option to sleep and then a few weeks later turns on at all?

    Yesterday, the computer was working, and I shut it down normally (because he will not sleep if I choose anyway). I unplugged everything, including the power cord. He had served during the night. When I plugged everything back up, now it will not turn on. When I plug in the power cord, the Green LED indicates will power (green light in the back near the plug), but when I push the power button on the front, green back light turns off, & the computer does not illuminate.  He acts as something of a power vacuum. I have been stressed for 3 weeks trying to figure why he would not sleep, it seems now he can sleep forever!  Help, please!  It is a HP Vista computer & about 4 years old. I have never had any problems with it so far. Any help is greatly appreciated!  Thank you.

    Hello
    It seems to be a hardware problem. I suggest you to contact the HP support team by visiting the following link. They will be able to help you the best.
    Also:

    http://h30434.www3.HP.com/

    Hope the information is useful.
  • Computer shuts down when internet wire connected at startup

    Computer works very well if started without Wired internet lead.  If the cable is connected at startup, computer stops with message blue screen STOP: 0x0000008E (0xC0000005, 0x0000000D, 0x9C0A36A4, 0x00000000) beginning physical memory dump. Complete physical memory dump. He then proceeds to stop down and re boot constantly.

    I did a system restore worked, but if I remove the internet head the computer shuts off with the message of such blue screen mentioned previously.   I am running Microsoft Windows XP Professional Version 2002.  My anti virus doesn't show any threat from virus, worm, etc..  Any suggestions out there please?

    Microsoft helps you better if you provide us with information on your system and configuration of the system.

    for example, make, model, type of internet connection, antivirus company etc., ram, OS
  • Photoshop CS6 shut down when you use the move tool

    Photoshop CS6 downs closes when using the move tool. It seemas to run fine until I have to use the move tool. PS worked fine a few weeks ago and now he has this problem. What can I do to ressemelable this problem?

    Thnaks,

    --

    System specs

    Windows XP Home SP3

    AMD Atholon 64 X 2 double

    2 GB OF RAM

    Video cards

    Radeon 7200

    NVIDIA GeForce 8400GS

    Oh ok I didn't know that's what you said sorry. I think I found the problem. It appers that he had a problem with 2 screens, so I disabled the secondary display and it seems to work fine.

  • Equium A100-147: Internet connection shuts down when idle

    I had a problem with my computer since I bought it, that my Internet connection is cut on me, apparently after I let the computer idle for a short period of time.

    Currently, with a direct cable connection, I can get the connection up and running again by disconnecting and then reconnecting the cable, but sometimes that doesn't work and I have to restart my internet box to raise the connection again.

    When I use the wireless, the same thing is happening, although I always reload the internet zone to re-establish the connection. It seems to be a problem of time, but I can't work on how to solve this problem. Any suggestions?

    Hello

    This sounds like a problem in the router settings (internet box)!
    My router supports an option that seems very similar to you time-out problem!

    If this option is enabled router disconnect after several minutes (this depends on the settings) if the internet connection is no longer necessary!

    I think you should check the router options!

    Good luck

  • Satellite A50-109 shut down when the CPU has to work hard

    My laptop off when I open the www with graphic flash or when the processor has to work hard. What's wrong?

    Hello

    Looks a bit like an overheating problem. What do you think??
    Have you checked the temperature with a tool of freeware as an Everest for example?

    To my knowledge the laptop stops automatically if the temperature rises to a critical level to prevent material damage!

    I think that the cooling modules don t runs properly and therefore the temperature doesn't fall.

    Usually, fans can turn with a maximum yield due to dust and debris inside the laptop.
    From time to time it s advisable to clean the fans with a spray of air compression. It can be everywhere for laptop and computer purchase.

    You should also be able to clear any dust and debris using a normal vacuum.
    Place it on the grids of aspiration air for a few seconds. But be careful.
    A strong suction can damage fans.

    If you have no experience, I recommend to contact a technician and would like to ask for help

    Good luck

  • IT SHUTS down when I try to watch videos on my pc (windows XP)

    When I try to watch videos on my pc for 10 or 15 minutes, it works well. but after that it suddenly off: (.) When I try to turn it on by clicking the button of CPU it won't on a few clicks once that she turns slowly. I also have a UPS.
    If I'm not going to watch pc videos works gr8
    my pc specs:

    Microsoft Windows XP

    Intel (r)

    Pentium (r) 4 CPU 3.40 GHZ
    3.39 GHZ, 0.99 GB of RAM

    PLS find the solution :(
    I have searched all forums for this problem but could find anywhere

    0.99 GB of ram is on a min for xp. Consider installing more memory ram,

    Make sure you get the same thing that you now have (single or double sided), most of the PC

    will not let you combine the two. Also, R.Click my computer, properties, Advanced tab

    swap file, the value button, L.click of change on C: "let the system manage", click on set 2 X, close

    outside.

  • Media Player freezes then shuts down when scrolling through my music

    When scrolling through my music on the media player, about half way through, Media Player freezes all then stops.   I uninstalled and reinstalled several times without success

    You get an error message? If so, please post the full text.

    If WMP crashes, then please send the technical details of the accident here. Go to start - run, type eventvwr.msc, and then press Enter.

    In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.

  • My computer shuts down when you try to open Internet Explorer

    Original title: windows xp, does not

    my computer stop suddenly now when I try to open int explore, a box appears asking what program I want to use to open it, if I click on int expl another box appears, options to run or save, choose whatever an i, nothing happens.i tried to access panel a system restore or simply to check perf and hand It won't allow me to access one of these progs, he said only: application not found, basically, I can't access what, whether internet connection is fine.

    Hello

    Method 1:

    I suggest to do a SFC (System File checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    Method 2:

    I suggest that you should follow the steps mentioned in the article below.

    How to change or choose the program that starts when you double-click a file in Windows XP

    http://support.Microsoft.com/kb/307859

  • my computer shuts down when I'm on why this happens?

    When I go to any web site or play games it rnadomly stop then I HAV wait 10 to 15 seconds to turn my turn... After this intruder entered into my computer, it has started to do... I have to take it in a computer store have they fix it? or is it possible to try other things on my own?

    Make sure that your Windows Firewall is enabled.  If you are not behind a router, you can get one to take advantage of the hardware firewall as well.  You can get them for as little as $15 these days.

    -

    Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
    -
    Microsoft has suggestions and offerings to
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
    -
    Moderator Forum Keith has a few suggestions along this line to
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
    -
    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
    -
    You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
    -
    Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
    `
    I hope this helps.  Good luck.

Maybe you are looking for

  • Is removed from the Iran of Apple Black country list now?

    A warm hello to the fantastic users dear Apple team and it's < 3 I just have a question today. iran is removed from Black list countries apple now? Can I use Apple products (like: Apple Store, Apple ID, Customer Care, Online shopping, Making Music Ap

  • Table of contents order

    I'm working on a Table of contents of a training manual, and I'm a little confused on how to manage the order of the items in my table of contents.In my page, I have two styles of different paragraph I want to show in the table of contents - the subh

  • Complex detailed image cutting - best method?

    Can anyone suggest the best method to cut the fish from an image like that, leaving a transparent background. I have CS5 (Mac) but could rise to CS6, if there is a better method in there. It's too complex to use the pen tool. I kinda like this to do

  • Get the gateway of a computer virtual using Powercli

    Hi allAnyone know if it is possible to use PowerCli to get a virtual computer gateway?I've looked everywhere and I just find the function to make the set.Thank you for your help

  • Could not find Class / MethodMaker.pm

    Get the error when executing command can be found below.$IAS_ORACLE_HOME/perl/bin/perl $FND_TOP/bin/irep_parser.pl g - v... Could not find Class / MethodMaker.pm in @INC (@INC contains: / u01/applmgr/hr/apps/a pps_st/appl/fnd/12.0.0/perl /u01/applmgr