Shuttle with cascade LOV and pre-populating on the right side

Similar Questions

• My toolbar was at the bottom and is not on the right side of the screen when I turned on the PC. How do come back on the bottom?

  How do you reposisition the toolbar background down

  Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:

  My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?

  You say "toolbar." Do you mean the taskbar?

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  If it does not move, it can be locked. In this case, right click on it
  and uncheck "Lock the taskbar", then try again.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.
  Ken Blake, Microsoft MVP

• Reference Dell 3100cn impression faded and white bands on the right side

  I have a Dell 3100cn that has about 3 years and I started to experience 2 lines of dots down the right side in each of the CMYK about 1 inch from the right margin.  With some additional impressions, points has continued and the right margin collapsed to some.  When he meets it, I inspected the original drum, which had 13 000 impressions color top and found a pattern of noticeable wear on the roll right where the points emerged, which is also in the middle of the faded area.

  Since then, I've replaced all 4 cartridges (no change) and the drum (this removed the points) and the points are gone, but faded on the right side are always present and sometimes introduce a little yellow toner into a stipe as well.  Any ideas what may be the cause - possibly a roller needs to be replaced?

  Here are some pictures of the problem: http://picasaweb.google.com/kerrylandis/Dell3100cn?feat=directlink

  Any help would be most appreciated.  Thank you!

  Kerry

  Did you clean the stuff off the coast of the new drum unit? There SCRATCHES, left on the drum, after that you do? If so, this drum unit is "toast".

  Once again, excellent photos. Nothing seems to be "demonstrably" false except for one thing... I noticed you are using 3rd party toner carts. In this model of printer, which is bad news. I'm sure they are cheaper, but in the long run, you'll end up paying a lot more to get your machine fixed.

  3 toners (in this printer class) do not have the same OEM toner xerographic properties. In your case, it seems as if the black toner from the black developer is agglutination at the drum, preventing all other colors to make an efficient transfer. You will need to replace all the 4 cpl developer and all 4 carts of toner (with original parts) just to be sure. Not cheap.

  By law, manufacturers of printers are prohibited by the "us clay Act and Sherman Act ' and the 'Canada competition law" and other laws of you ask to use their cartridges. That said, this Bill does not mean that OEMs are responsible for repairs when downgraded 3rd party or products are used in their machines. Also, this Act does not require manufacturers to share their toner formulation... usually a trade secret... with their competitors.

  Some manufacturers use special formulas for their toner. All 3xxx/5xxx series Dell COLOR laser printers fall into this category. IF 'other' toner is used in the machine and the machine is damaged, repair of that circumstance is NOT covered by your warranty. In other words, you will have to pay for the repairs until the machine is fixed, then, the machine is back on warranty. I know from personal experience that Dell has this policy.

  I know your warranty not on now... but it will cost you some $$ if you want to restore this machine perfect condition. More than $$ printer is interesting, but it's your decision. (you might think of parting with the machine on eBay)

  Personally, I no longer buy third party carts... NONE of the 3rd party resellers ask if they will guarantee repair of the printer costs if their product causes damage. If they say yes, ask in writing.

  Sorry I don't have better news for you.

• How can I get my sections with double pages to get started on the right side of the spread?

  (I use Indesign CC 2014, on Windows 7)

  My book has several sections.

  Each section is a separate file.

  All pages use 2up master pages.

  If all sections have an even number of pages, there is no problem. But some stops on a left page (side spread of the left page).

  Therefore, sections must begin their first page on the right side of the spread.

  I need to produce PDF files for production, and because of the fluctuation of the content, the amount of pages in each plank is random.

  What I have to indicate if each section begins on the left or right of the spread manually?

  Here is an example:

  

  Once the PDF file is released, I need the first page of the Section 2 to be automatically where is the pink rectangle.

  Instead, the last page of Section 1 and the first page of the Section 2 times use the left facing page of my pages master 2up.

  If the page has an odd number, that it will automatically switch to the correct position, if the property page shuffle in the side of the page is allowed and if it is possible to mix pages of the spread.

  In the book panel, you also have to set up you book numbering options.

• Retain the selected items on the right side of the shuttle in cascade

  Hello
  
  I'm under Apex 4.0.2 and have a cascading shuttle point so that a user can filter the left side of the shuttle using the text field.
  
  However when filter it - the shuttle seems to lose the items already selected on the right side.
  
  How can I change the element of the shuttle so that the user can always see the selected items, and the filter only works the unselected points (left side)?
  
  Thank you
  Keith

  Hi Keith,

  I don't have a blog, so there is no post. However, this is what I did:

  1 set the P298_FILTER element to 'Submit when you press enter' and added a branch to the page that redirected to the same page

  2. make the following settings for the P298_SHUTTLE element:

  Cascading LOV Parent article (s): P298_FILTER
  Page items to submit: P298_SHUTTLE
  List of values definition:

  SELECT ENAME d, EMPNO r
  FROM EMP
  WHERE UPPER(ENAME) LIKE UPPER(:P298_FILTER) || '%'
  OR '%' || :P298_SHUTTLE || '%' LIKE '%:' || EMPNO || ':%'
  ORDER BY UPPER(ENAME)
  

  and that is it really. The WHERE clause filters the record based on a filter match or a match with the existing items from the shuttle

  Andy

• I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

  I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

  Hello

  (1) you use Internet Explorer or another browser to go online?

  (2) this happens on all websites and pages?

  (3) other sounds work fine on the computer?

  (4) may I know the operating system you are using?

  (5) were there any changes before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Check the playback settings to see if the device is turned off / disconnected.

  Method 3: If you are using Internet Explorer, check if this option is enabled.

  a. Click Start, type "inetcpl.cpl" and press to enter.

  b. click on the Advanced tab.

  c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

  d. click ok to apply the changes and see if the problem still occurs.

  Restart Internet Explorer and check if you can hear the noise.

  You can also try to update flash player on your computer and check if the problem is resolved.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope the information is useful!

• All-in-one HP Officejet 7300/7400 series, it will work with Windows 7 and how to get the OCR software work?

  I have a HP Officejet 7300/7400 series all-in-one, it will work with Windows 7 and how to get the OCR software work?

  By installing complete software functionality of the HP cd or online installation and connection of the printer only when the installation says too much

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=391182#n193

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• How to fill in the right side of the shuttle with display/return values?

  Hello
  
  I know, the right way to fill in the right side of the shuttle's only:

  declare
       v_list     apex_application_global.vc_arr2;
  begin
       select profile_name return_value
         bulk     collect
         into     v_list
         from     user_profiles
        where     user_id = :p61_user_id;
  
       return (apex_util.table_to_string (v_list));
  end;

  It is comfortable for the user to see the name of the profile.
  However, I need a profile_id as return value, as I have on the left side of the shuttle.
  
  The left side of the shuttle is filled with a selection list with display/return values, as you know.
  I need both sides of the shuttle to return profile_id in order to create a merger.
  
  How is it possible to fill the right side of the shuttle with display/return values?

  Make a selection list on the left side of the shuttle to return profile_name as return value as well.
  In this way, the two parts of the shuttle will return the same value, which could be used as a State of fusion.

• How can I get a scroll bar at the bottom of the page so I can see the right side of the page when I'm with two windows?

  With two or three open pages, I have scroll bars that allow me to see the right side of the other pages, but not on the page of Firefox.

  If you have a three-button mouse, click on the middle button
  and the mouse becomes a scroll controller.

• all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

  I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

  Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

  If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
  http://www.eightforums.com/

• My arrows for front and rear have disappeared and bookmarks went left. they were on the right side before how to fix this please.

  The arrows on the <>bar tab which allows you to go back a page or a page forward disappeared. Also my favorites were on the right side of the screen but now went to the top left screen in the tab bar. How can I fix this please. Thank you. Pamela

  Do you see the bookmarks in the sidebar?

  You can toggle the power switch with Ctrl + B bookmarks bar or view > sidebar

  • Press F10, or press the Alt key to bring up the 'Menu Bar' temporarily if the menu bar is hidden.
  • Use "Firefox > Options" instead of "tools > Options" If the menu bar is hidden.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

• When I start a new page in FF4 is always on the right side of the screen and the menu bar also goes by the window. If I click on the address bar is displayed correctly

  It is a problem I've had since the first race of FF4 beta. All sites are on the right side of the window to start a new page, then it works very well after the first.

  Create a new profile exclusively for version 4.0 beta and create a shortcut on the desktop with Pei 'profile' attached to the target to launch this profile.

  • http://KB.mozillazine.org/Testing_pre-release_versions
  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• HP envy 5530: printer Cup emails in width and loses 1/3 of the words on the right side

  When printing emails, 1/3 of the words from the inside of the right margin are cut and do not print.

  animal-lovers

  Welcome to the Community Forum of HP.

  Emails are tricky - and not all email clients are the same, neither are the browsers where you can print the email.  Almost anything could break the margins on the right side.

  Please take a look at the following and see if anything here helps - and you can also try opening your emails using another browser, too.  Yes, I know - eew.  But it might help to see what is happening.  In addition, it could give you an idea, if the problem is universal, i.e. emails look bad / feel bad no matter what you use.

  You might be able to use 'Fit to page' in print preview mode, or you might be able to control the margins by adjusting the actual "margins" - also in mode print preview.

  If all else fails, you may view the email and take a 'Snip' from the email, save it and then print the image you saved.  Ick.  But it could be something that you could use as a last resort.

  Manage the print with preview output before printing

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Menu start and the icons are on the right side of the screen

  Menu start and the icons are on the right side of the screen - how can I move this down to the lower part of the screen?

  Hello

  You should really be asking in the forums for your version of Windows. Click on the
  Appropriate forum in the Menu bar under the Logo of answers on the upper left on
  This or any page.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ---------------------------------------------------------------------------------------------------------------------

  Right click the taskbar are of course lock the taskbar is not checked.

  Take the taskbar with a left click of the mouse and drag it to the bottom of the screen

  You can set the lock the taskbar to prevent it from being moved again.

  Move and resize the Windows Vista taskbar
  http://maximumpcguides.com/Windows-Vista/move-and-resize-the-Windows-Vista-taskbar/
  Unlock and move the taskbar
  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  How to lock or unlock the taskbar in Vista
  http://www.Vistax64.com/tutorials/150820-taskbar-lock-unlock.html

  I hope this helps.