Sick T30 - questions of RecordNow

Similar Questions

• Question card mother T30

  Hello. Sorry for posting this again, but I couldn't find my old thread.  I have a t30 with a dead mobo and a t30 with a good mobo.

  the bad news: we had a trackpad (dead mobo), the other not (good mobo). can I swap the hoses and have a trackpad?

  EDIT:

  http://img258.imageshack.us/my.php?image=t30mbjuly211yg3.jpg

  I found this image of my next motherboard. I circled what I seek in red. This is the connector that the trackpad used on my death. can I just plug this one instead? That's my understanding came from this t30 not all with the option "ultranav", but that means of not able to the motherboard?

  SOLVED! I had today and fixed my t30! My advice didn't come with a trackpad, but I swapped the case and bingo! I got a restored T30! Switch to the X 86 operating system on this one project!

• Questions about updates on IMac

  I've not updated Imac

  with Yosemite, I have before El Capitan?

  No, you can go directly to El Capitan assuming that your Mac meets the specifications

  https://support.Apple.com/kb/SP728?locale=en_US

  In General, you should always pass to the last possible system like you meet the specs for, as long as you do not have "must have" applications that do not meet specifications. The idea that the updates/updates cause problems is probably derived from discussions that see you here. ASC is like an emergency room for people to have problems, especially the sick, those who come here. Not the hundreds of thousands of people pass without difficulty, never here and go merrily on their way. In addition to the improved features, updates/improvements important security fixes.

  Things you should do before moving...

  1. backup copy. Anything can happen at any time, so you should always keep a good backup. Make a bootable clone SuperDuper! or clone double or use TimeMachine.

  2. If you have questions on your current system don't their compound by installing above them. Solve them first, and then upgrade.

  3 control of HARD drive for free space. At least 8.8 GB of available storage. Preferably more.

  4. check your applications for compatibility here... http://roaringapps.com/apps.

  5. unplug all devices, including USB hubs.

  6. After downloading the installer, it will be in the folder/Applications. Duplicate and drag the copy to other locations it download so if you want to save the installer.

  7 be patient, the download takes a long time, and the installation may appear as sometimes it is dead. Ignore it.

• Satellite P200-144 - DVD player question

  Hello

  Well, it's kind of a stupid question but anyway. When you press the button to eject CM how much distance it open because I do not know if mine comes out correctly.
  If you can post a sick photo would really appreciate

  Thank you
  Machanic

  Hello

  It is exactly 12 cm. Just enough space to accommodate a CD vertically. My laptop is a P200 - 10 c a clone of yours, but with a single HARD drive so I guess that this will apply for your to.

• Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

  Hello.

  I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

  I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

  The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

  Why the Sun Java Runtime Environment is necessary?

  I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

  Thanks in advance if anyone is able to help.

  Kind regards

  John

  Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

  Satellite Pro P100 (PSPAEA)

  Chipset: Mobile Intel (r) 945 PM Express Chipset
  Memory controller: 82945 PM
  I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

  What I installed...

  03 - display Driver
  04 chipset Driver
  05 - network - upgrade Ethernet driver
  06 - network wireless driver
  09 - sound Driver
  10 - driver CardBus controller with UltraMedia
  12 - modem Driver
  13 - modem region Select utility
  14 Bluetooth Stack
  15 - Bluetooth monitor
  17 Hotkey Utility
  21 - SD Secure Module
  22 - SD memory card format
  28. DVD-RAM driver software
  33 user manual
  TOSHIBA fingerprint digital-software (from Vista drivers)
  TOSHIBA-disk-Creater (from Vista drivers)

  What I do not installed...

  01 - Microsoft Updates (I used Windows Update to do this)
  02. Sun Java Runtime Environment
  07. customer Intel utility
  08 Atheros Client Utility
  11 - touch pad Driver
  16 - C - infrared driver
  18 YPP/power button Utility
  19 utilities
  20 - buttons
  23 - assist
  24 - ConfigFree
  25 - zoom utility
  26 PC Diagnostic Tool
  27 CD/DVD Drive Acoustic Silencer
  29 WinDVD Creator
  30 - RecordNow
  31 DLA
  32 - DVD player

  Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

  The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

  With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

  Hope this helps and please post your results as it is good to share their experiences.

  Regards, Rob

  PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

• I have a few questions about the internet and partition recovery

  I deleted completely OS X Yosemite and only left Windows. Now that I'm pretty sick of Windows and want to use my Macbook Air for real, I am using recovery of the internet (order and R) to reinstall OS X.

  I backed up all my data and that you haven't stored anything in my Macbook. My questions are: (I know they are long, but they are quick to respond)

  1. I want to erase everthing on my Mac. I have now 3 partitions. After starting and pressing command + R, I would use disk utility to erase everything, like this .

  After you click Delete, would be merged my 3 partitions in 1 and I could repartition my Mac?
  

  2. I want to create a partition for OS X Yosemite (and possibly upgrade to El Capitan). What is the minimum recommended size for partition OS X Yosemite? (Because my SSD is only 128 GB)

  3. Let's say I create 3 partitions, let's name A for OS X, B for my data and C for reinstalling Windows. If I boot into Windows, I'd be able to use (read and modify) data on B, or just OS X could do that?
  

  4 the amount of data I should download during the recuperation of the Internet? I guess that much since I'm downloading the OS X package, but my internet is quite slow, so I want to know how of SGB I have to download.

  5 If I asks me to enter the Apple ID to download OS X, would any book Apple ID?
  

  Thanks for reading. I would be extremely grateful if you answer my questions. See you soon

  • 0: have backups of everything that you care and disconnect external drives except those you use specifically.  While he isn't supposed to, repartitioning should always be supposed to cause a total loss of data.  Corruptions can and do happen sometimes, unfortunately.  Stray user commands can sometimes target bad drives for erasure or repartitioning, because errors can happen.  Do not connect anything unnecessarily.
  • 1: Yes.  You want to create a volume of GPT partitions.
  • 2: let Yosemite size and add his own scores.
  • 3: using Boot Camp to add the Windows partition.  With a small that disk, I might well Park out Windows on an external storage device, or use a virtual machine, and Windows as a guest.   In general, add additional user-defined partitions are not general, something I recommend.  Resizing and adding and removing partitions can meet with corruptions, provide for backups.
  • 4: depends on various factors, including least aren't servers from Apple how busy are, and how fast your network link is.  I have used to create a local installer and use it.   That fact also resumed and other operations more quickly, at the price of a few $ for a drive of sufficient size.  Recent versions of OS X are ~ 6 gigabytes in size, based on installers the.
  • 5: any Apple ID will work, but having more than one active Apple for OS and app ID buy usually leads to disputes to find out who bought what and who can update what.

• T30 keys on the keyboard does not

  Hello. Some of the keys on my T30 keyboard have stopped working completely, the keys are 4, 5, r, t, f, g, v, b. If a quick glance at the keyboard, the keys are just below the other, perhaps giving a hint to someone who knows, keyboards, what could be the problem. So now my question is: is it worth to spend money on a new keyboard or the problem maybe elsewhere? Any suggestions what to do? Thank you.

  Welcome to the forum!

  If you like your T30 I give it a shot and get a replacement, good keyboard tested a used can be pretty cheap on eBay.

  Good luck.

• IBM Thinkpad T30 RAM Flaw

  IBM Thinkpad T30

  Type: 2366

  Manufactor Date: July 2003

  OS: Windows XP Pro SP3

  Processor: Intel Pentium 4 1.9 Ghz

  RAM: 512 MB

  HARD drive: Hitachi DK23FA-60

  Graphics card: ATi Mobility 7500 w/16 MB RAM Radeom

  I realize it's a very old laptop but it still works to this day and I use it every day.

  I've been a bit online and I found that there is a design with the motherboard fault. More precisely the location of the hard drive and RAM above the other causes a lot of heat build-up to this place. IBM (now Lenovo) offered a repair or replacement of the laptop for a few years I know. My question is Lenovo continues to do this or not? I got this laptop a month ago and a half, so I have not long. Unfortunately I have no money to even pay for the repair and even less to ship for repair. Is there something I can look at?

  Welcome to the forum!

  It's been years since the replacement program of the Board of Directors on T30 units had ended.

  Your best bet is to install a single 1 GB DIMM in the 'healthy' location and use the machine like this if one of the RAM slots failed.

  Good luck.

• Two questions. We wish to remove the Vista and download XP Pro and would not let me explore the "Document and Settings" in the C"" drive.

  Mr President

  Buy a laptop the year last Dell with VISTA. It won't let me partition (including shrinkage etc.). No matter where you go that it denied access, including loading the program. Search function I'm trying to understand for a year yet, I can't find.

  I want to explore the "Document and Settings", but access is denied.

  Finally, I gave up on VISTA now that I bought a XP Pro... Tried to format the drive it did not show me the hard drive.

  Direct booting from cd said that it found no hard drive to load. I am just desperate and sick of this VISTA. Please help to get rid of this OS.

  I'll be eternally grateful to you if you can help me. The newest...

  Anil

  http://www.Svrops.com/Svrops/articles/jpoints.htm

  Read the above about Junction Points in Vista

  Old path	New path
  \Documents and Settings	\Users

  Above is the reason why you can not access it!

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

  If the XP drivers are not available for your model, forget the idea.

  If Yes, download and save to a CD or Flash drive.

  Save all your data because it will be lost during the installation of XP.

  Then follow the steps below to do a clean install.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

  Once installed, reload ALL your other programs of original media, or download again.

  Reload all drivers and utilities for your motherboard.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any other question of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion 17 - I was sick, created my recovery disks and a BIG thank you

  After being sick for about 7 days, I was finally able to create my recovery disks on Friday, 1/24.  Everything seems fine except for a couple of pop-ups in the process.  The two pop-up windows had to do with DVD RW drive E one say a word on the listen to what is happening with removable disks and another on plays to see what is happening with the blank discs.  These 2 messages appeared after having burned the first disc, discs later and disappeared before I could answer.  But, I think that the creative process was not serious, because each disk burned correctly, each disc has been verified and message saying something on start-up line was made.

  I also read in my sense that you delete the recovery partition on the hard disk to reclaim space for additional storage.  Is this something rreally what should be done?

  Also my Revovery (D reader says it was modifed 01 24, 2014 at 10:38, file type.)  Why we say that, when I created only the recovery discs?

  In addition, on my HP Support Assistant it said still to creat in 2 sections recovery discs, one in "Updated and developed them, HP messages" in the section «Battery and performance»  I used the printed instructions from HP to create consumer support of discs.  This is - why it still makes its appearance in the HP Support Assistant and I can remove them from there?

  Thanks-Yous of thanks go out to those who have helped me on this site, especially CherylG.

  CherylG, you've been very patient with me for answering all my questions.  I know that I have brought you crazy with some of them!  And I can certainly understand that, but you show no frustration with me in the comments to my questions.  You know, be patient with us, the elderly (laughing while typing this comment).  I know for a fact that I will have that other qustions happen if I can't easily find the answers in the online documents.  I hope that you will help me once again (LOL, laughint outloud here).

  Oh, I noticed the length of time you've been helping people on this forum and the number of responses you have accumulated in this time.  I am very sure that there are many people who have used and still use this forum appreciate your expert help... I know I do.

  Thank you, once again.

  A little encouragement?  I would say that you have provided a lot of encouragement I really needed.  Thank you for your answers to my questions in the post above.  Oh, the information on the HP Wizard program in the manufacture of recovery disks that disappeared.

  Thanks again for your expert advice.

  Take care.

• Cisco RV042 questions

  Hi all

  I installed our first RV042 router as I am getting a little sick of the mediocrity of the game with Zyxel and hope to use for all of my clients in the future.

  We have a problem where every morning when the user arrives to work there seem no internet. The isp said it is fine and more but no one can work, restart the router solves the problem. We use only wan1 and have installed the latest firmware, but get this question. I swapped the router with another brand and it sounds great. It is as if something expires and stops the router to work

  Someone at - there clues here please

  Thank you

  Glenn

  glenn_btn,

  My name is Ishmael. IAM with small business support team. Making excuses for the question about your RV042. I found the best solution to solve the problem of internet connectivity is by disabling the Network Service detection. Now if you were to look at your logs you would see THAT NSD cannot connect. Reason for that this router will give you this message is because when there is no connection detected for your inactive WAN (in your case WAN2) router sends then an error message down your WAN1. To disable the NSD, simply go to the system management > DUAL WAN settings and uncheck the box to turn it off completely. Don't forget to activate this feature, once you decide to make another connection to WAN2.

• RecordNow version 7.32.1 build 08F update problem - internal error 03f2.8007007b

  Hi all!

  The machine is T30 with Windows XP Professional SP2
  (RecordNow preinstalled 4.10 ver)

  There are accessible RecordNow 7.32.1 update leave ThinkVantage System Update (classified as an option).

  When I try to install it, I get the installer internal error 03f2.8007007b. Update is interrupted at this stage.

  I know that it is subject of RecordNow, not TVSU. Because the update downloads OK and integrity is verified. Anyway, I couldn't have this resolved using the Roxio support forums:

  http://forums.support.Roxio.com/lofiversion/index.php/t17819.html

  I have the current version of Windows install and I have disabled the personal firewall
  There is no Windows Defender and there is nothing in the event log.
  Plase help!

  -karabass

  Did you ever get an answer to your message?

  Reinstalling this software on a formatted drive itself was really a nightmare. I had to search for days to find a copy of the RecordNow program for my CD-RW/DVD drive on my T30 2366FBU system. After finding on the Lenovo site, it (rn732108f.exe)

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-57007

  Blithely, I downloaded and it chose auto install for me. The process went well thanks to complete until the installation when a pop up stating

  "This program can be used only on hardware IBM or Lenovo" ?????

  Then stopped dead without having to install.

  The directory and the installed files are protected by Word and I am at square one.

  Never seen this problem?

  Sparky

• T30 power supply problem!

  Hello

  My thinkpad T30 has the following problem:

  Turn - indicator and white lcd

  no thing happen just indicator on!

  I removed the battery for 1 min then try again so it works correctly, the problem me wit get more than 10 times

  over the last year.

  and now does not work in all cases

  What should I do?

  Here's a question for you? Your problem of power comes from the battery itself or the motherboard?

  This is what you can try to do it.

  (1) remove the battery and power cord

  2) press the power button on 10 times

  (3) press and hold the button for 30 seconds

  (4) connect the power cord only

  (5) try to turn on the unit.

  Your device should still be able to turn on with just the AC power. If you see only the 2 LED (the one with the circle and the 'Z' patter, which is the power on status, the other is one that looks like the plug of power supply) and your unit is still not lit, then you need to replace your motherboard...

  If you can power your device successfully, try plug the battery later and see if it will charge at maximum capacity. So go ahead and remove the power cord. If your unit loses power immediately at the time you remove the power cord, then Yes, you have a bad battery and must be replaced.

  Let me know if that helps you at all. Care.

  See you soon,.

  Mark

• WHY WHY WHY I PAST so MUCH BLOODY TIME ON BLOODY WINDOWS QUESTIONS WHERE THE * they PUT MY OFFICE 2010 IN THE BLOODY UPGRADE TO WIN/8

  I'm sick and tired of ruining my bloody life hunting victory/8 questions and my tracking where my office 2010 went I did not the bloody time, where is my "OFFICE 2010"

  Win/7, and it was done through a download and had to reboot a couple of times before came out correctly and not the Office of Skydrive isn't the office, I mean, I prefer my office that I bought "the Office 2010, fortunately I have my office in my other computer as I installed it on my three computers , but it's my main computer and I would like to ask Tommy, is there a way I can transfer my office lock stock and barrel on this computer if you please and please excuse my ignorance on the matter, but I have some questions around a head injury, which leaves me confused when you try to follow the instructions.

  Thank you for your time

  If you have performed an upgrade in place dedicated to Windows 8 of Windows 7, Microsoft Office 2010 is still installed and must be localizable/able to work without any problem.  So the link I gave in my original answer which - when visited - explains how to start a Microsoft Office application in Windows 8 * if * Microsoft Office is installed.  Given the trouble you've had so far, I would first try the instructions 'charm research' on this page.
   
  If you have performed a clean installation somehow (rather than an upgrade) - then, you need to install Microsoft Office 2010 again from the installation media.  If it's a download (Microsoft Office), you must either download it again or if all goes well you copied the files/Installer downloaded to external media.  You also need a product key for Microsoft Office 2010 in this case.

• Wireless 'g' for a T30?

  Recently, I replaced the router in my system to get an upgrade security from WEP to WPA. My question is there a functional nic 802.11 g to replace a 'b' in a T30?

  I tried to use different cards and cannot get past the bios in a startup sequence, as the message tells me this invalid device and remove it. I took out my card Wireless 'g' of my T43p (FRU 27K 9933) installed in the T30 and got the same message.

  The unit that I work with is a T30 2367 AU5 with a motherboard 91 p 7689. The T30 was originally a 81U 2366, with an unknown Mo because he had a 2.0 gig. Processor. Map of cassis 'b' wireless is a FRU Cisco 26 8522.

  Anyone have any ideas?

  Bob

  Here's the map for a good price, a gentleman who is a fellow guru here and a moderator on TPF, 100% trustrworthy:

  http://Forum.ThinkPads.com/viewtopic.php?t=69265

  I hope this helps.