Signal output data expressed on a serial port

Similar Questions

• How to trace data sent through the serial port by controlling simultaneously the buttons

  Hello

  I want to plot data by controlling the two buttons at the same time and the draw according to my control using communication serial port, but the problem is that the plot on the graph alternates between the two controls his do not change according to my control for example if I move the potentiometres1 / 1000 and button 2 to 4000 replacing these values on the graph I placed a select control, the problem is still not resolved u can help me please thanks in advance

  Regarding

  Samatha

  
  

• Problem reading data via the Bluetooth Serial Port

  My request is meant to connect with a PC via Bluetooth.

  The PC runs a simple server that reads a string from the BlackBerry UTF and writes a UTF string in response.

  DataInputStream istream = connection.openDataInputStream();DataOutputStream ostream = connection.openDataOutputStream();
  
  System.out.print(istream.readUTF());
  
  ostream.writeUTF("Hello client");ostream.flush();
  
  ostream.close();istream.close();
  

  The sound written BlackBerry pin and reads the answer.

  DataInputStream istream = connection.openDataInputStream();        DataOutputStream ostream = connection.openDataOutputStream();ostream.writeUTF(Integer.toString(DeviceInfo.getDeviceId(), 16));ostream.flush();
  
  _rtf.insert(istream.readUTF());
  
  ostream.close();istream.close();
  

  The server reads and prints the PIN successfully, but the client raise EOFException at readUTF().

  What could be wrong?

  Solved. The server side must not empty its output stream.

• Reading codes ascii serial port and their trace

  Hello

  I am trying to build a VI that reads data (ascii values) of the serial port.

  I am trying to build a Phonocardiogram wireless. I have a microphone that acquires the heart sounds. These signals is amplified and sent to an A/D converter to digitize it. the digital signal are sent to a base unit. UNTV signals received by the base unit must be sent to a computer (via a serial port to display).

  I would like to build a VI to draw ascii data received through the serial port.

  I would like to draw these values so that the plot resembles an analog signal (the one I had before an A/D converter).

  Can someone give me help?

  Thanks in advance...

  HII

• serial port: input/output signal combined suburbs

  I am currently using LabView to replace another user for a scientific instrument interface.

  LabView is connected to this unit via a serial port.  The instrument spread 25 bytes of binary data from the computer every second.  I can read the binary string (Read VISA) and maintain will cause disc using a while loop.  In addition, there are some instructions I can send to the device that will do various functions (start logging, turn the LED on / off, etc.).  I can send these instructions to the instrument using the previous interface and in a stand-alone vi using VISA Write successfully, but when I place the function Write VISA in the largest interface vi, signals go haywire.  Specifically, there are two separate lights I can alternate with two different commands, but when in the biggest interface vi, the two commands Toggle the LED even.  In addition, it seems that the singal that immediately send to the instrument (a single ASCII character) bounces to the computer in the 25 bytes of binary data streaming.  In other words, after I pressed the LED 'on' the key, a column of my streaming data changes when it's not supposed to (ex: after binary to ASCII conversion, changing a single digit in a 20 digit value).

  At first, I thought that the problem was the sequence of read/write VISA.  I read all the data in the current configuration, and then leave for orders writing.  The two VISA functions are in the same loop to continuously monitor the data.  Is it possible the signal output of writing not letting the while loop and being read as input?  What would the instrument two different commands as the same as read?  My goal is to run an interface that displays data in ASCII and allows some options different rocking while that the interface works - there is an elegant/effective way more as a while loop?

  ~ Going bananas

  
  

• How to periodically send various types of data via the Serial Port?

  Hello! Everyone

  I have to send data to LabVIEW to my device on the Serial Port.

  I know how to send data on serial port in LABVIEW, I already have this part.

  Now the problem is that I have several types of data I need to question my embedded device, if I want to send the query periodically command.

  So lets say that my four Op Codes are the following, which will send four different types of query command to my device on the serial port.

  (To be honest only OP_LED and OP_SENSOR is used now)

  0, OP_SYNC

  1, OP_LED

  2, OP_SENSOR

  3, OP_FUTURE

  Structure of basic package is as follows:

  Header (0x2C), Checksum, length of the data (n bytes), Op_Code (1 byte), length (length of Code + data Op)

  For OP_LED, I need to send the package as follows:

  0x2c 0x02 0x01 0 x 00 0x2F (0x2F being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)

  Length of the package this is 0x02

  0x01 is Op Code for OP_LED

  In the same way

  For OP_SENSORi need to send the package as follows:

  0x2c 0x03 0x02 0x00 0 x 00 0x2D (0x2D being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)

  0x03 is length of packet here

  0x02 is Op Code for OP_SENSOR

  So, how can I do this periodically in labview, in such sort that period can be adjusted whenever necessary.

  Is there something in LabVIEW to do.

  I had done the reception and decoding part and working properly.

  http://forums.NI.com/T5/LabVIEW/store-data-coming-from-serial-port-in-buffer-and-then-take/m-p/32722...

  So I must implement read and write the part of same while loop?

  Do not insert in the table if you put data in an array at index 0.  Just use array to build.

  No need to have Visa to write don't be a part of wire to the wire of reference and error VISA go in the upper part.  These wires should go THROUGH the entry VISA.

  Don't your checksum requires all the bytes up through data?  Righ now, you only put the checksum on data bytes and forget the opcode and length bytes.

  Your sending is not the opcode for Opsync or Opfuture.  You just send the empty tables.  At the same time for the other two, you put the opcode in the data table.  All your original opcode in the table build thread.  Get the data out of these structures in case item which is supposed to represent the opcode.

  xpress_embedo wrote:

  Now it works but I have now two problems.

  (1) OP_SYNC and OP_FUTURE do not data, but still receive its data on serial port, can I do something here as I have nothing when the table is empty in the structure of the case.

  I do not understand this statement.  Perhaps my answer above will fix any issue you have here.

  (2) how can selection operation Code to be send is done using control façade but real application, this task should be automated to a certain frequency, like OP_LED package must go out to the serial port to 100msec and packet OP_SENSOR must go out to 1000msec, I do this.

  Now you agree a little more architecture.  I would encapsulate the code that is in the while loop as a Subvi.  Then with the hand of your program while loop, use two time Express VI, a game for 100 msec, the other for 1000 msec.  When an express VI is true, run the Subvi with a command set waiting for the answer.  When the other VI Express is true, have it run the Subvi with the other set of commands.

  The device responds with anything when you send these commands?  You only send data.  I see no VISA Read to be able to recover all the data.

• Using the Serial Port for data acquisition Non-Serial

  I searched the forums and can't find anything on this topic.

  I saw that it was possible to use the parallel port for e/s digital single and I was hoping that the serial port can be configured the same. It seems all VI VISA only to use the serial port to receive ASCII characters at a given flow rate, but is it possible to simply query the status of the line series at my own speed to see if it is high or low, kind of like a single pin DAQ?

  It seems that it would be possible until the serial data are read and controlled by labview, not Windows. Let me know if you have ideas of how to approach this problem, or any comment as to why it is not possible.

  Thank you all!

  Select the property > settings series > Modem of the line parameters. For example, the State of the CTS is an entry to the pc.

  With the help of these lines is a very poor substitute for a scope or map DAQ. The only things you can return is Asserted, Unknown or Unasserted. The range of acceptable signals is important enough. Anything between + 3 and -3 is an unknown state. Your other signals is + / 3 to 15 volts. What type of signals do you really want to capture?

  Edit: there is no such thing as a visa so I have no idea of what you actually use.

• Need help to add serial port to a virtual with "Output to the file" computer in PowerCLI

  I have a requirement where I have to add a serial port to a virtual computer that is an Ubuntu operating system and the port type must be 'output to the file"with a file name specified in a data store on the same ESX host.

  Can anyone provide me with a script of powerCLI for this please?

  Thank you very much

  Suparna

  I advise you to upgrade to 4.1 PowerCLI.

  If this is not possible use the attached script that works for versions pre-version 4.1 PowerCLI.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• analysis of the chain of the serial port to retrieve data

  Hi all

  It is a problem of beginner. I have two sensors sending data to a same wireless serial port. In order to distinguish which is which. I coded each sensor to send data with a unique address UoL 000 X, then followed by two values, I want to read. These two values are in the float with format fixed impression (decimal fixed after the third bit). The format string of the first sensor should looks like UoL 0001 123,45678 876.54321. I use the Scan of the String function, unfortunately, it doesn't work that way. Could you please check the VI for me? Or a better solution for this application. Thank you very much.

  S.G

  It does not because what you have set is not different from what you have joined earlier.  Have you tried something?

  See this amendment attached to your VI.  The format strings work with the examples you gave, and sends the data to the appropriate indicator.

  Also, I cleaned up the mess that the inner loop where you were waiting for 1 or more bytes.  Which means most of the time that you would probably get an incomplete message.

• Store data from the Serial Port in the buffer and then take action?

  Hello! Everyone,

  I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW.

  But I have a duty, therefore needing help.

  initially I see some of the tutorial videos and learned about the LabVIEW interface, and does a little project to communicate with the Port series (receiving and sending data).

  Happens to my task.

  My LabVIEW application will send a few State request packets on my device or control and based on the response packet that I have to display values.

  The Structure of package is as

  Header, length, Op_Code, data Checksum

  There is no terminator as newline or carriage return or anything else.

  In C language, I read the data from the Serial Port, and based on the length, I conclude that I got the full package or not, and then by recalculating the checksum value, the integrity of the package is verified and then based on that Op-Code has been sent will be decided.

  (I'm dealing with hexadecimal data)

  But how can I do this in LabVIEW.
  A tutorial or any referece will be useful for me.

  1. I suggest that you learn to use Shift Registers instead of local and global variables.  They are much more efficient (memory and execution speed) and make it much easier to read the schema.

  2. you don't need this inside the loop property node.  Is there a way to configure a Serial Port to turn off the stop character.

  3. you don't need to wait for playback VISA will limit the rate of loop if no data is coming.

  4. Once you have the length, you simply read the rest of the entire message and process it at a time.  This will make things a LOT faster.

  5. you should really do this enum a def type so that you can ensure that all your enum constants have the same values.  If you need to add a State later, simply update your enum in the same place then.

  

• collection of data & graphical CTS (M-24) using the serial port

  I work to collect data of a test (M-24) CTS station, using the serial number of the station to the serial port on my laptop.

  Looking for information on the vi.

  There is no driver for this instrument (I guess you are referring to this: http://www.cincinnati-test.com/sent_m24.php) on IDNET. Therefore, unless someone has already written an and happen to run across this thread, you will need to write one yourself. It is not hard to do, but you will need programming manual. There are a number of resources to help you write one: http://www.ni.com/devzone/idnet/development.htm. Since you intend to make the serial communication, you should also look over this: http://zone.ni.com/devzone/cda/tut/p/id/4370

• Waiting for data on serial port

  Hello everyone.

  I'm trying to figure out how I can solve a problem on LabView. I programmed an Arduino board to read and send a data table of the accelerometer on the serial port. I want to LabView to receive the data and graphs it. My problem is that Arduino send data on an ongoing basis and sometimes LabView can not cope with traffic and read some values "0".

  Is it possible to wait for the data and solve this problem?

  I joined my current vi.

  Thank you much in advance.

  AndreasSchnaas wrote:

  Yes, the characters are 0-9 and - no. ' + 'or'. '. And bytes that vary.

  Once again, thank you very much.

  Given that you send ASCII characters, change your Arduino code to send a character to end of line (10 byte value) at the end of each transmission.  Your code is already configured to use it.  Then you need not use the bytes to the Port at all.  Suffice to say the VISA of reading to read a large number of bytes.  Playback stops when it finds the stop character (value 10).  Your code will get a lot easier from there.

• Add data from serial Port in the indicator series front panel?

  Hello! Everyone,
  I'm new to LabVIEW but has prior programming experience.

  I have to develop a front for my camera and this is why I need LabVIEW, data comes from serial Port, so I started internet research / LabVIEW forums and found various tutorials by the help I am able to do the part Serial Communication, but has got stuck in one thing.

  Whenever data from serial Port, it gets displayed on the indicator chain but clears quickly, but I want some data comes it does not erase the old data and new data to add with the old data.

  I read the string concatenation will work in this case, but I am not able to use it.

  Please take a look at my VI attached to this mail.

  You must use a shift register to keep your story.

  

  I recommend you go to some of the tutorials available.  They will help you a lot to get off on a lot of things like that.

  Introduction of 3 hours
  Introduction of 6 hours
  Bases LabVEW
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki
  OR learning
  Getting started with products OR

• How better to apply a data serial port FIFO buffer?

  Hello

  I think I'm missing something very basic, so, please forgive my ignorance. All I want to do is to establish a simple FIFO buffer that has a logical sequence of quality control before the display of the data on the screen. I can't understand how best to continuously browse incoming data.

  The attached vi should explain much of it. My 25 bytes per second through the serial port of watercourses of the instrument. I heard it is best to put the VISA reading outside the loop, but I can't get my vi to read constantly new data if I do this (it stops at the length of the buffer specified).

  Is a possible solution to properly use a feedback node?

  Thanks for the help. I use LV2009.

  Use these settings

  

• Serialize the data into several messages from serial port

  Hello

  My current LabVIEW project, I want to read data from the serial port and store the (transformed) response in a file.

  Since my design model is based arround the Manager of messages queued waiting my serial communication is also build around that. (see this post for my original question).

  But now I have the following problem:

  In the loop 1 I put several messages in the queue of loop 2.

  Loop 2 processes these messages and sends them to the print queue of loop 1.

  Loop 1 gets several messages that need to be combined into 1 string and (with other data) in a file.

  Just to clarify:

  Loop 1, I have send 3 messages for each connected device. Even though I have a separate file for each device, the response to the messages must be in 1 result string.

  

  (Note on the picture: there are other loops running at the same time you will also need to access the serial port for the port for loop 1 is not an option)

  Hope you can help.

  A next attempt to download the code

  The attached Code is provided as is. It has not been tested or validated as a product for use in a deployed application or system, or for use in dangerous environments. You assume all risk for use of the Code and the use of the Code is subject to the license terms of Sample Code which can be found at: http://ni.com/samplecodelicense