Signal strength and range of the latest wifi routers

Similar Questions

• iPhone 6 more issues activation and network on the latest iOS 9.3.2

  I have an iPhone 6 it is having problems with Activation and networking connectivity. I activated via iTunes and updated to the latest iOS 9.3.2 this morning. The phone remain active for a period of time and then come back to need activation.

  Using WiFi it is full bars but no connection. I'm typing this from my iPad on the same WiFi connection, so not the network. If I turn off WiFi and cell there still no connection. The phone will receive calls (even when stuck in the activation state) and can make calls after you have enabled from iTunes.  She was released a couple of times, but always the same question.

  I tried to erase and reload from iTunes to the top, but the restore function requires that find my iPhone service shut down on the phone and this step requires access to complete network.

  Try the following steps:

  • Try connecting your device to your computer and launch iTunes. Choose your device and click on summary > update.
  • If this does not work, make sure you have the latest version of iTunes installed on your computer and restart your computer.
  • When it restarts load iTunes and try to select your device and click on summary > update again.
  • If this does not work, it's time to try a restore. Press and hold the sleep/wake and home buttons on your iPad or your iPhone until iTunes gives you the option to restore your device.
  • When it's over, you can restore a backup, and you should be good to go with 9.3 running iOS.

• Yellow ' dot/star' on my internet (signal strength bar) icon in the systray.

  Original title: yellow dot on the wireless icon

  I have a yellow dot, or more specifically a yellow star on my internet (signal strength bar) icon in the systray. The weird part is that I seem to have a complete internet service. What is this and how do I get rid of him. (If all you have is a solution, it is fine, also.) The weird part is that, if the computer has served for a long time, she disappears.

  Thanks in advance.

  Please post your query as a new question that this problem has been resolved.

• Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?

  Upgrade XP 2002 to more current system

  Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?

  Currently have XP Home Edition 2002 Pack 3 and upgrade to the latest version free. How do I do that?

  Last free version of what?

  If you're talking about Windows, it has never been free.

• cannot open and ask for the latest version.

  try to open a pdf file, but it requires upgrading to the latest version.

  I have check for update and it shows the latest version

  It's actually the first time I've seen this message. I saw several people who have said that they are opened in Acrobat or Reader - even asked to check - and only a screenshot has finally confirmed that they were not similar symptoms. Sorry to doubt, but this has been universal.

  So, in this case, I think that we can simply believe the message. Your version of Acrobat is very old. I don't know what are the characteristics in a file PDF can give this message.

• Tutorials refer to a shape tool and the rectangle tool. My cc of photoshop doesn't have these tools, and I have the latest version. Help please.

  Tutorials refer to a shape tool and the rectangle tool. My cc of photoshop doesn't have these tools, and I have the latest version. Help please. My toolbar is missing for these elements. I'm learning through tutorials and something is not up-to-date.

  Does that help?

  

• How do I change my Lightroom and Photoshop to the latest version?

  How to change my Lightroom and Photoshop for the latest versions?

  Hi Centerwall,

  This is a user to help rather than chat forum. Information on how to get Chat support can be found here: FAQ: how to contact Adobe for support?

  Please see the information here which explains how to upgrade applications Cloud Creative: FAQ: how to upgrade Creative Cloud applications?

• Files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are registered as *.ai------.

  I have an older version of Illustrator and you want to upgrade.  My question is: files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are recorded as * .ai?

  That should be no problem.

  Text will be redistributed without doubt if you want to change it.

• WiFi signal strength not shown if the internet bar is connected

  I use windows 7 with Intel core2duo with 2 GB of ram, the wireless signal not showing in the task bar is connected to the internet and access to the internet, it was working a few days ago

  PS: I have worked for the customization of the bar he task is the problem.
  see you soon

  Hi MrSunilShrestha,

  You have another user on this computer account? You are able to see the network indicator in the taskbar notification on this account? Follow the steps in this document to create a new user account. If you can't find the icon appears in the taskbar of notification, you can also use these steps to recover from a corrupted user profile.

  Let us know if that helps.

• Multiplexing of signals microvolt and conditioning of the right signals

  Hello

  We have 22 signals in our system. We must be able to measure any subset of these 22 signals. Usually, we carry out a number of measures IV 4points of separate devices on a SUT (sample to be analyzed). Two of the 22 signals may represent the pair of voltage measure 4-point IV, depending on how it was KNOWN is bonded. The level of the signal of tensions is in the 100s in the uV range and I need a precision as much as possible, so the unit or same sup - uV numbers. So far, we had all the 22 signals connected to a box (selfmade) acting as a distribution point, where a connector (SMB) is available for each signal. We then manually choose which two of the 22 that signals will be connected to a differential amplifier silent instrumentation (also selfbuilt), according to it was KNOWN patterns of liaison. The amplifier with a gain of typically 1000, returns the signal to an acquisition card. The current (excitation) is read separately.

  There is a problem with that. We need to manually switch the connectors in the distribution box to select a different device on it was KNOWN and flows to the amplifier. This is not good for a number of reasons that I can't go here.

  Therefore, I would like to multiplex these 22 signals to several outputs (for future scalability) who will be wired for the conditioning of signals. There is no manual connection/disconnection of these signals in this way. The first question is: can a matrix switch or multiplexer be used to route signals reliable microvolt? If so, then what kind: electromechanical, Reed relay or a transistor? Is the thermal EMF in the specifications of multiplexer/matrix relay just a lag, or is - that noise?

  The second question is: what card/signal acquisition solution (so no selfmade equipment and legacy) products OR only using the same line that the matrix/mux can reach 1uV accuracy of treatment? For us, offset offset is not a problem since we measure the device in 2 quadrants and later cancel it in the software but the noise (and get the accuracy) is important. Our amplifier has a background noise of 3nV/sqrtHz and a bandwidth of 15 kHz. The system to replace must be comparable. I have the choice between:

  • the SCXI based ones, instrumentation isolation (4ch) 1121 or 1122 amplifier modules (16 channels), with a ground noise that I calculate 20 and 30nV/sqrtHz respectively. They already have some functions of multiplexing btw.
  • the PXI 628 x with a background noise that I calculate through 10nV/sqrtHz
  • the PXI 446 x with the noise floor low 8nV/sqrtHz as stated in the technical data sheet

  Module 4-way universal 24-bit NI 9219, who works with 2 samples per second has a very low noise total, but at a very low sampling frequency and I can't consider comparable to what we have now. In addition, the system must be able to have a few kHz bandwidth for dynamic action in the future.

  Y at - it any other ideas?

  Greetings
  Aleksandar Andreski

  
  

• the wireless signal coverage signal strength is good, but the problem with the health channel network overlap more

  Hello everyone

  In our project after the implementation of the wireless project

  I had done the survey for heatmaps wireless post

  I had signal strength is good for what - 67dbm for 2.4 & 5 ghz

  but the problem that i am facing with bad network health and overlapping of channel are more

  controller to change the autotunning for the channel for a floor for 2.4 and 5 ghz and some APS change us 2 emission power

  for a floor that we tuned we receive good channel and network health overlap report for combined 2.4 and 5 ghz

  but for the single report 2.4 and 5 ghz, report overlap health network and channel are not good

  postsurvey tools that I use for ekahau

  When I use the ekahau tool each time tool message upgarded last skip version or version

  for postsuvey basically for the heatmaps approved as

  1 power the signal should be-67 or de-65 dbm

  Support in this regard will be highly appreciated.

  Wait a second.  I saw this card before floor!

  Are there two of you working on this issue?

• What is the mozilla firefox update Shockwave Flash plugin AND what is the latest version of Adobe Flash Player?

  After update of mozilla firefox and come here to help another user pointed out that I had several Flash plugins below. Before updating, I was updating from mozilla firefox and Adobe. Of course, things were NOT up-to-date. I managed to delete the obsolete Flash and Adobe Flash Player plugins. I just want to know what that "more" updated the plugin and the player are while I know that I have the last and am new. I do the last firefox update now and I use Windows 7. Thank you! You people here are the best!

  Note that your system details list shows several Flash plugins.

     Shockwave Flash 14.0 r0
     Shockwave Flash 17.0 r0
  

  The plugin for Firefox is called Shockwave Flash and the latest version is 17.0.0.188

  When it installs, Flash by default to update automatically, but if you need to manually update, you can use one of these pages:

  • https://get.Adobe.com/flashplayer/ (uncheck all the unwanted extras)
  • https://www.Adobe.com/products/flashplayer/distribution3.html (one for the browsers 'plugin')

• This download is available for a Tablet Asus Android and what is the latest version/version?

  I can't access my account of electricity because my Firefox version is earlier than 3.6. When I check the downloads available for my Asus tablet that runs Android, it shows the version of Linux available and when I look for the Android version, it indicates that it is for phones using Android. The (mobile) phone work on my Asus Tablet and what the latest version/version?

  You can use the "On Firefox" button in preferences to check which version of Firefox you are using.

  If you try to access a web site that requires Firefox 3.6, you can try to install the Add-on "Can" and then go to the Firefox preferences and change the 'User Agent' option to 'desktop Firefox. This will make Firefox for Android pretending to be Firefox 3.6.

• Hey! I have the 1st generation mini iPad and it runs the latest version of iOS 7. Do you think I should install iOS 9?

  Hey! I have the 1st generation mini iPad and runs the latest version of iOS 7. Do you think I should install iOS 9?

  Question like this will get answers: Yes... No... sure... don't even think about it... absolutely... no way... my mini blah blah... etc.

  The final decision is yours. Your device, you decide.

• I've recently upgraded to Office 2016 and also got the latest version of Acrobat Pro, but the Acrobat option does not appear in the Office components. How to make this work?

  I own Acrobat Pro and downloaded the latest version. I also improved my 2016 from office to office, but the Acrobat option does not appear in the Office components like previously in 2013 office. How can I get that back? I often secret several worksheets in PDF format and it is tedious to print them one at a time and then combine. I used to be able to select all the worksheets I wanted and combine them in one go.

  Hi steverobb,

  Acrobat XI is not compatible with Office 2016 for the moment. Please wait for future updates.

  Kind regards
  Nicos