Signature "by the account" does not work correctly
Features: iPhone 6 iOS available 9.2 41.1 GB
I have configured and you can send from multiple e-mail accounts (6 including iCloud) on my iPhone.
My problem: the signature "by the account" feature does not work correctly. I enable this feature, create distinct signatures, choose to send other than the default e-mail account. However, the default signature in the message, followed two copies of the signature on behalf of which I want to send the message below. I deleted and readded to each email account and of the signature, but find the same result.
Having this problem as well, or very close. I can't get the HTML signatures to work (IE, appear) when
I sent mail from an account that has a.
This question to a while back in older iOS and has been fixed, now it's back...
I often crash parameters when you try to paste a HTML signature in place and when
I have a y arrive, it does not show in the email project. When I add a text character
at the signing, he sometimes shows up. Very erratic...
Tags: iPhone
Similar Questions
-
I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes. Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?
The last thing you want to do is install and run any third tuneup/Optimizer program.
In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.
-
The cursor does not work correctly, difficult to control! Help, please!
Cursor is not working correctly, difficult to control!
Help, please!
Thank you!
Hello Rudolf Jr,.
If it's on a laptop, then it might be the sensitivity of the touchpad. Depending on the manufacturer of your computer, you can download a driver for the touchpad which may help. Or go to control panel, mouse-click and change the sensitivity of the touchpad settings.
If it is a Synaptic touchpad, you can download the driver from the following location:
www.Synaptics.com/resources/driversLet us know if that helps.
Marilyn
-
Data error (cyclic redundancy check) and the disc does not work correctly
Original title: I installed the mainly broadcasts music on this disc many times without probs, now I get "data error (cyclic redundancy check)".
I installed it now mainly music programs of this pile of disc of times with no probs, I get the error message "data error (cyclic redundancy check)" on all the programs on this disc, when I put the disc in the drive of my pc seems to be a bit slower than normal too. one of the programs is fruityloops 8, if I click on install, but click on fruityloops 8 engine I get ' ZipMsgXX.res is probably not related to the executable string ID missing is 11036' as I have 6 fruity, I thought that it could install using Installer 6 fruity but it wont... someone help...
Hi shaunrollett,
Control of cyclic redundancy or CRC errors, usually occur when copying data to a CD or DVD. The error may indicate a bad block, a damaged disc or a hardware problem.
You can check whether or not the CD works in another computer.
You can try to run the Fixit mentioned in the link below and check if it helps to reolve the question:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problem
Hope this information is useful.
-
Clicking on web links embedded in the email does not work correctly
With FF3.6 and earlier versions when you clicked on a link in an email, the focus would turn to the FF window with a new tab open to the linked web page. With 4.0 when you click window link a launches new FF, reduced to a minimum and it is on my homepage instead of the page in the link. My email client Thunderbird 3.1.9, my OS is Linux/Fedora 14.
It works for 9.01?
-
my mouse on my laptop does not work correctly...
the "clicker" on the laptop to put it technically, but not the touchpad. You must hold it down for a while and press really hard to make it work, I don't know if it's something that I can fix it or to replace. any suggestions to fix this would be appreciated!
the "clicker" on the laptop to put it technically, but not the touchpad. You must hold it down for a while and press really hard to make it work, I don't know if it's something that I can fix it or to replace. any suggestions to fix this would be appreciated!
Hello
It looks like a hardware problem if the button does not work correctly. Until you can find a solution, you can use an external USB mouse.
I recommend you contact the manufacturer of the computer for that matter.
Concerning
-
Webcam USB 2.0 on my laptop with windows vista error device does not work correctly
Original title:
I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.
I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.
Hi Matthew,
The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.
Now, check out these links and return to the State of the question.
When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.
Here are a few common problems with drivers and the means to solve them.
See the following link for more information:
Tips for solving common driver problems
Also check out the following link and run the fixit available.
Hardware devices do not work or are not detected in Windows
The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
-
Application does not work correctly when I press a CommanButton
Hi all, I'm having a problem with weblogic 10.3.5.
It turns out that an application created with JDeveloper 11.1.5, I have test and all is well in that the JDeveloper integrated Weblogic.
But when to deploy on a stand-alone 10.3.5 weblogic server, the application does not work correctly when I press a CommanButton to go to another search page (the 'action' property is properly set), but nothing happens, remains in the same home page. Similarly when a link of commanButton to run a workflow, it does not work, however in the integrated JDeveloper to Weblogic it works correctly.
How can I solve these problems?
Thank you.One thing you shouldn't do is add '.jspx' to your URL. This shows the page, but does not start the life cycle of faces that show not work button not working navigation.
Usehttp://
:7001/myApp/faces/index And it should work.
Timo
-
I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?
Hello
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
Thank you.
-
I gave this e-mail address to answer to another email user but my password has been changed and nt theres initially asked
zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password but the link does not work as it changes the password of my account, she tried this link 3 times now is there anything else she can try.
Hello
· What operating system is installed on your computer?
· What browser do you use to connect to the internet?
· Which email service provider you are talking about?
Because the problem is linked to facebook I suggest you to post your query on facebook forum for assistance:
-
I forgot the password and secret your answer, and my e-mail account does not work
I forgot the password and I forgot the secret answer also, and my e-mail account does not work. I just my alternate email account, but my password is not sent to my alternate email account. any body can help?
Call your e-mail server. Bruce Hagen ~ MS - MVP [Mail]
-
Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".
I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.
I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
entries that do not fix the resolution of problems and those who "could" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
Parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
The side-by-side function does not work correctly, windows overlap
original title: sizing windows side-by-side
The side-by-side function does not work correctly, windows overlap. How do fix you this feature?
Hello
It is Aero Snap. When you select a window how you "cutting" it in position? You do not use the window key and the arrow left/right or are you drag / drop window? If you drag / drop, using the keyboard shortcuts help to solve the problem?
Kind regards
Alex T.
~ 2007-2011 MVP Windows desktop experience ~ -
When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows. Help
Hello
Try to uninstall and reinstall the network adapter drivers.
Download the latest drivers from the card manufacturer support page.
Download the drivers and extract them to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
---------------------------Computer network health.
Check the Device Manager for the entry of valid card of the wire.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).
Turn off the computer and the router, reset the router and the computer.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
On the State of intellectual property.
TCP/IP and its variables usually look like this.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
Typical TCP/IP status looks like this.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
Physical address is the MAC of the card number.The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.* Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
------------------------
Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...
Hello
Make sure that Photoshop is closed.
1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop
You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.
2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.
It should be working fine now.
Thank you
Maybe you are looking for
-
Often should I open and close my macbook
I am 15 and am home-schooled, so during my school day my macbook is just on my desktop, plugged in and charging. I get up from my desk several times a day (to read a manual, lunch, take a break, exc.) and I was wondering if I should still be opening
-
I recently had problems with the Restorer of classic theme, add-on proposed by Mozilla to restore the classical theme of Firefox.It was causing problems with the tab bar, then I need to turn it off. I need help reproducing the appearance and the func
-
Docking station for Satellite Z30 - A - 1-2
Hello I'm looking for a docking station for my laptop, Satellite Z30 - has - 1 2.Can you please help me find the right model? Thank you!
-
I tried to analyze documents (pdf or jpeg) to the map. Configure the document exactly at the right angle. scanned documents come out of the page. Tried to find a way to reduce the size (IE 90% as it is possiple copy). looking to the hadou parameters
-
Change my Apple ID and now all the other devices asking me the password for the old ID.
Using my MacBook Pro El Capitan 10.11.3 running, I changed my code from Apple. We have two iPhones and two iPads. All are running 9.2.1. As I made the change to the ID, other devices constantly ask me to enter the password for the old ID. Of cour