Silverlight will not play on my Mac when I try to watch Netflix!

Similar Questions

• When you try to watch Netflix on Media Center, I am prompted to open a session. After you connect to im returned to the screen even ask my name of user and password.

  Movie from Netflix in Media Center

  I have windows vista media center home premium 64-bit version. I was able to watch movies through the center of media until recently. It automatically pulls up to my account, etc. in queue, but when I click on a movie to play it takes me to a login screen. I try to re-login, but it goes just to the same screen and will not play. I tried uninstalling and reinstalling, but to no avail... same problem. I even uninstalled and reinstalled silver light, but it doesn't work anymore. If anyone has had this problem and have they been able to solve it? I can watch them via Explorer very well, but I want to be able to use media center. Help, please!

  Hello

  Follow the steps from the link: limitations of Netflix on Windows Media Center for Windows Vista and known issues: http://support.microsoft.com/kb/972496

• My SP6 will not open RAW images, and when I try to update, it tells me that updates may not be applied. Any suggestions? Please, it is very important, I have this problem as soon as possible.

  I would like to edit RAW images in Photoshop, but I get an error message saying that the file cannot be opened and to make sure that I have the updates. But when I try to update, I get another error message tells me that impossible to apply the updates. I need this problem as soon as possible and I'm going crazy trying to figure it out. Any help out there?

  Try these links:

  Failed installation. Error U44M1P7 | Updates

  Cannot apply the update of the Extension Manager CS6 - error U44M1P7. Mac OS

  If the two do not work, consult this thread Re: error update CS6 Production Premium especially the last answer.

  Hope this will help you.

  Kind regards

  Hervé Khare

• HP Envy 4502: Will not recognize HP Envy 4502 when you try to print from Acer Chromebook

  I'm trying to get an Acer chromebook to print from my disk of google on my printer HP Envy 4502.

  I downloaded the necessary documents to HP and allowed everything that needs to be enabled on the printer.

  I am able to type the ip address of printers on the google search bar and put in place the HP software and print a test page from it successfully. The HP Envy is; However; is not listed as a choice of printers when you try to install it through the section of advanced setting of Chrome.

  In addition, I know that the printer has a unique e-mail address, but I can not print even to his email directly. It generates the e-mail, but nothing prints.

  I am able to print wireless HP Envy of my laptop.

  A definitive answer from anyone who has managed to do this would be greatly apprecaited.

  Thank you

  Hello

  It might be useful to install HP printing for chrome extension if you don't have already done.

  I've included instructions for Setup here.

• My speakers will not play sound no matter what I try.

  * Original title: sound problems

  I have windows 7 and I don't know exactly what I was doing, but now my habit of speakers play sound no matter what I try, someone help me please.

  Through this https://support.microsoft.com/en-gb/gp/no_audio_playback_windows

  If no joy try this https://support.microsoft.com/en-gb/mats/audioplayback

• When you try to watch Netflix, my Windows 7 computer keeps stopping itself.

  This often happens when I'm watching netflix.  I checked all the addons, and there is nothing suspiscious.  Please help me!

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Check with these utilities to see if information may be collected: run BlueScreenView
  to see if there were any BlueScreens and verify in MyEventViewer at shutdown
  (or a few seconds before) See the event log contains useful information.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
  or time of the BSOD or event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event or BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
  application of all accidents occurred in your system. The information breaks down is extracted from the
  .WER files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

• Here's a solution when Netflix will not play on your Mac and you use Intego VirusBarrier

  Yay! I am so happy. After speaking with a Microsoft agent on the phone and they informed me there is no technical support phone for Mac users (oh joy! but she was very nice) and speaking with the third person of Netflix tech support - they finally me it was Intego VirusBarrier.

  Here's the situation. Netflix played is more on our iMac 10.8.1 Silverlight not has not been recognized, and I couldn't download it directly from the site of Silverlight.
  The solution is
  Click the Castle
  Hover over VirusBarrier
  Uncheck the information hiding under surfing
  and here's Netflix works again
  I hope that helps you!

  Hello

  Thanks for sharing the information. In case, if you need help, you can always after your questions related to Windows and your valuable suggestions in the Windows forum.

• PC will not open .jpg to MAC when you export from Lightroom

  When I export a photo from lightroom on my Mac on my external hardrive, they are very good. I can then open it with mac, etc. When I plug in my external hardrive to my PC and open the pictures, some of them only are visible. It looks like 2 different collections of photos. One is. _IMG_xxxx.jpg and the other is_IMG_xxxx.jpg. the. _IMG_xxxx.jpg will open on pc. When I check the properties of the photos that some are newer once I exported from lightroom and some of them are those of an earlier date, and yet I exported just as the exact photo on MAC, Hung my outside up to PC and checked. Did I miss something in my export options? I can export or "save for web" in photoshop (as a jpg file) and have no problems with opening the photos on a PC. Why is lightroom sends me in trouble? Thank you!

  FAT32 should work OK for this purpose I was just curious to know if it was something different.

  I think that what happens is that Lightroom is not correctly check if the image already exists in the folder. Remove the images from your PC or your Mac after you transfer? You might want to try to do only for the Mac (which will remove the dot files too). You can also reset warnings dialogs in Lightroom, which is done in the preferences-> general section.

• When you try to watch netflix it says 64 bit does not support silverlight

  Have windows vista version, had netflixs and looked just fine. Something happened to the p.c., now when I go to look at, it says that 64 bit version does not support soft micro silver light. Not true! We need to help, please!

  Have windows vista version, had netflixs and looked just fine. Something happened to the p.c., now when I go to look at, it says that 64 bit version does not support soft micro silver light. Not true! We need to help, please!

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Uninstall all Plugins Internet

  Make a note of what you uninstall so after getting their all uninstalled, you can reboot and install again.  Be sure to get Adobe Flash Player (all versions), Microsoft SilverLight, Apple Quicktime/iTunes, RealPlayer/RealAternative, Adobe Air, Adobe Shockwave Player, etc..

  -After a reboot - visit their web pages, and then install the latest versions.

  Reset.

  Try again.

• currently I have cc membership which is $ 79 / month and I applications, but what I use is photoshop and cc so I would switch to the plan $10 / month, but it will not give me this option when I try. How can I pass?

  currently I have cc membership which is $ 79 / month and I applications, but all I use is lightroom and cc so I want to switch to plan 10 $par month for just these two. I can't seem to figure out how to do, so any help would be greatly appreciated

  Hello

  Please contact Support: https://helpx.adobe.com/contact.html?step=CCSN_membership-account-payment_change-or-upgrad e-your-membership_stillNeedHelp

  They can degrade the plan.

  Thank you

  Jitendra

• M4V files together will not play

  Hey,.

  I tried to reach some mp4 files linked together and can hit mp4joiner (mp4joiner.org). I joined together some mp4s I had downloaded from the internet and it worked fine. The problem came when I tried to join the m4v files that comes originally from the dvd.

  M4v files have been created with makemkv. I then used the handbrake to convert them into a smaller m4v file. mp4joiner will join them together but quicktime will not play the file. When you open quicktime starts to try to convert, then a box pops up saying "quicktime player cannot open filename.mp4" (mp4joiner saved as mp4), and happens on additional software may be required to read the file.

  I put the MKV by brake hand again to convert with extension mp4, thinking it was the m4v that was causing the problem but quicktime won't play anyone (VLC won't play it either, it says codec is not supported, although the sound will play). Why the file play when the source came from the internet, but will not play the file if it came from a dvd? Mkv and Handbrake files play fine, only when I try to join them that will not play the new file.

  How can I sort this or can anyone recommend another program Carpenter? I tried the iMovie but the original videos are 4:3 and iMovie eventually their stretch in 16:9, when released.

  Thank you

  (mac mini, Mac OSX 10.11 at the end of 2012)

  Update on that.

  Two files that were originally downloaded from the internet and joined as well as mp4joiner, are not playing the quicktime format. They play but now I'm just the message concerning quicktime is not able to play, what is happening?

• SONY DVP-FX780 will not play on TV

  SONY DVP-FX780 will not play on TV, even when I unplug the device and the TV from the wall.

  Thank you

  Scott

  Make sure that you select entry appropriate to the TV. Also, check if the connection is closed and secure.

  Try to use different Audio/video cable connection and check if there is a photo. Also, try to connect the reader with different A / V port of TV (if available).

  NOTE: Before connecting, turn off the drive and the equipment to be connected, then unplug the wall outlets.

  If my post answered your question, please mark it as "acceptable Solution".

• my laptop will not find my wireless network when I'm trying to relog. I then reboot the computer to make it work

  I can be on my laptop and the internet works fine, but if I close my laptop and come back, sometimes it will not open a session. When I try to connect to a wireless network, it will appear not all networks at all and I live in a condo and I usually pick mine as well as a dozen other choices. The laptop won't restart when I try to shut down or restart, it just goes in the part of the judgment of the process, but goes no further. I have to manually hold the power button to shut down the computer.

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry