Simple button does not properly?

Similar Questions

• The ARC mouse left button does not properly

  The other day, I bought a mouse Arc.  My right button works fine, but my left button does not respond unless I have push down hard and hold the button for one second.   Simple click, it translates the button press then to click but nothing happens.  I guess it's just a bad mouse and not a systematic design problem?

  * original title - Arc 'hard click' buttons *.

  Hello

  · Do you remember the latest changes on the computer before the show?

  · What is the service pack installed?

  Try the steps listed in the link below: troubleshooting failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

• HP Simple pass does not properly.

  I just bought a HP Envy 17 TS last Friday. And the finger print scanner does not work properly. On the basis of the recommendations of the Forum of Microsoft, I deleted and updated drivers for both the pass Simple biometric and HP.

  Here's the situation. HP Simple pass works for passwords of website and all but don't work try to use it to connect to windows itself. However, if I uninstall use the print and Pass Simple unlock this 8.1 of Windows has its own, it works. Pass Simple to reinstall and it stops working again.

  dmcbain,

  Welcome to the HP Forum.

  There are a lot of Envy 17 over there - I think left, unsaid and you details give a better idea - it should be sufficient because they are similar in nature (structure and file locking).

  It is likely that your laptop came with HP SimplePass version 8.x installed - it's the Softex version and it should work pretty well, and he would be able to get along with native login provided with Windows 8.1.

  You could try the following to see if you can get things back in order.

  Reminder: For best results, do not skip a recommended reboot sequence.

  • Make sure that all of your Windows updates are complete and up-to-date.  This is essential.  On a new system, it takes a few laps and restarts.  Once updates are complete, you can, if you like to put updates 'Notification' for the future.  If you install a new Windows updates, restart the laptop.
  • If you have not yet, download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
  • If you install the framework, reboot the laptop and connect
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
  • Start > type anywhere 'rebecca' or Recovery Manager >
  • Click here to start the Recovery Manager > under "I need immediate help" >
  • Drivers and reinstall Applications > find and reinstall your driver fingerprint sensor fingerprint validity
  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  Consider: you can probably run the version of HP SimplePass 6.x on this system - it is AuthenTec version, fully functional in terms of features and support webcards and Windows logon, too.

  See the following to download and install HP SimplePass version 6.x.  You can skip the part about reinstalling your fingerprint driver - you have completed this step.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  HP will never call on the phone and ask for money to 'secure your PC.

  Say "No, thank you," and hang up.

  Cybercriminals can call you on the phone and claim to be from Microsoft.

  See: Microsoft Safety & Security Center

  Mark my answer "accept as Solution" when providing a solution or workaround!

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Simple button does not?

  I was looking at this code for an hour. Maybe I need a break? It is a very simple button that does not accept my touch events.

  I have a clip. Its instance name is "boardA." The name of the symbol is "letterA" and it is linked to a class file called 'Letters' (which is connected correctly, I checked).

  
  This is the code in the class file:

  public void Letters() {}
  this.addEventListener (TouchEvent.TOUCH_BEGIN, createLetter);
  trace (this.letter);
  }
  
  public void createLetter(e:TouchEvent): void {}
  trace ("you clicked on it!");
  trace ("eName =" + e.target.letter);
  }

  Yet, nothing happens when I click on the button. The constructor for the file never runs.

  I moved even the touch event to bed "(TouchEvent.TOUCH_BEGIN, createLetter) boardA.addEventListener ' and it still doesn't work. Nothing when I hit the button.

  What I'm missing here?

  
  Thank you
  Amber

  I see letters is the base class for the letter,... etc.

  the package of letters and the location of Letters.as must be the same.

• camera button does not properly

  Hello world
  I bought my Xperia Z2 a few days ago and have strange question - the button of my camera does not work in all modes. I can open the camera by holding the button application but may not take any picture in auto mode. Key works in 4K video Time-Shifting, effects AR, burst mode: Timeshift. I don't check Vine, info-eye and social live modes only. I can take pictures by pressing the button of the screen in all modes. Do you have ideas of how to solve this problem?

  This is a button in two stages, firstly it is very light and it works like a camera focus button, but you should feel click sort of half that you press harder and it takes the photo like a true compact. If you do not feel any degree of pressing, it could be faulty, it's just a bunch of silicone with plastic buttons, so it could be incorrectly installed at the factory.
  The last time, just to be safe, try to start the phone in service mode (restart and when sony logo appears, press volume down until it starts up fine and you see the gray text on the main 'safe mode' screen if so it won't work - reinstall android with companion of sony, and if the system repair will not any changes consult the phone in sony Center or the store where it was) bought.

• button does not properly

  Hi all

  I created my first website. I managed to create a home page. On the home page is a key enter site, which once pressed begins the

  timeline... I have a layer of measures/labels that I write my code in. The number 'one' is my code below.

  Stop ();

  enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

  function buttonClicked (event: MouseEvent): void

  {

  Play();

  }

  So far so good.

  Once I click the entry site of the screenplay scrolls along on my content page (label 2 in the actions/labels layer). This page has more buttons that will lead to different pages of the site: about, showreel, contact etc. I created these pages button symbols, and each has its own layer on the timeline.

  On the keyframe 93 where the second label is I put a stop (); action. The chronology ends here. I want to now click on one of my new buttons and the chronology of the Act, to this page. This is where I'm having a problem. I thought that I copy and paste the code for the button at the top and change the name of the button page_1, but when I test the movie is no longer stops on image one and runs through the end of the timeline with nonstop.

  I get a compilation error:

  
  

  Location Scene 1, Layer ' actions/labels', box 93, line 5

  Description 1021: duplicate function definition

  Source function buttonClicked (event: MouseEvent): void

  on the content page, my second home label, in line with the actions/labels, I used this code:

  Stop ();

  page_1_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

  function buttonClicked (event: MouseEvent): void

  {

  Play();

  }

  See you soon,.

  Spaldo

  leave the code below unchanged:

  Stop ();

  enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

  function buttonClicked (event: MouseEvent): void

  {

  Play();

  }

  .

  On the image key 93 where the second label is, join:

  Stop ();

  page_1_btn.addEventListener (MouseEvent.CLICK, buttonClicked)

• TestStand Simple OI does not close properly

  Hello.

  We need to build a test system that runs TestStand 4.2 and code modules are created with LabVIEW 9.0. The SW is running on a PC with Windows XP.

  We currently use TestStand Simple (LabVIEW version) User Interface to run the tests, and with the Interface of the operator we have a problem.

  If we use the file TestExec.exe provided with the installation of TestStand, everything works fine. But we need to make some modifications to OI and if we open the project file, and then recompile the IO, then the IO does not properly close. It seems the execution testengine stop and stop the VI, but the window doesn't go away until move us the mouse.

  When I open the LabVIEW project file informs me that the project was saved last version 7.1.1 and we now run 9.0.

  Can someone tell me what is now the window on the screen until there is activity on the mouse?

  I found a solution.

  But I'm still a little bit frustrated because I have no idea why it works...

  Anyway, if I open the vi for the OI Simple properties, go to execution and change the enforcement system preferred UI Standard, then the problem goes away.

• Satellite A300-15J: touch button does not work properly from standby

  Recently I bought this laptop, works great except one problem...

  There is touchbutton for LED switching power.
  When I close or put the laptop in sleep, this button does not work like that but activates or disables the sound.

  I'm using Vista, I wonder if there is any patch or something for this problem.
  Thank you

  Andrew

  Can you please tell me if that happen after the day before, or after using the hibernation mode too?

• Buttons on the touch pad G505s does not properly in game?

  This is the second time I am posting this because of no response:

  I recently bought a Lenovo G505s about a month ago. Everything goes well with her until I downloaded Steam and downloaded games. 3 games I downloaded are snipers and therefore requires the left button of the mouse. But when I click it to shoot, he is sometimes unresponsive and is very laggy. This isn't the fault of the game, as I tried in different, but the problem is still there. I tried to change the round buttons (so that the right button is left to aim and shoot) and it works fine. I'd rather have the usual way around fact does anyone have a way to solve this problem? has this happened to you?

  If it is necessary here are some specs for the pc:

  AMD A8

  6 GB of ram

  WIndows 8.1

  also the buttons and trackpad works quite well with everything else except the game like Minecraft. It seems that when I move with WASD, the button does not work but the click of the button.

  Can someone give me an answer please?

  only, I have solved my problem. While randomly browsing settings for my PC, I stumbled upon the Windows mouse settings and it turns out that the time for clicks has been in the Middle, which explains the shift. I have this disables and problem solved without help of Lenovo at all. Lenovo support team good job

• Factory settings Resinstalling when blue Thinkvantage button does not work

  Last year, I panicked when I thought I had a virus. Rather than rely on my own multiple back-up system, I guess someone knew more about computers that I do and let someone else in my computer. My X 60 has not worked properly since. The Thinkvantage button does not work, and it is hit and Miss as to if I can get the thinkvantage functions to work. My wireless radio buttons don't work at all, and the indicator wireless lights turn on and turns off at will.

  I tried to reinstall the application and the update of all implement the Lenovo site, but nothing worked, so I think I'll have to reinstall the orginal factory settings and start over again to clarify these issues.

  I backed up all my data, and made discs (just in case) recovery... now my question is, how do I start to "rescue and recovery" / 'reinstall factory settings' when the blue button does nothing when I push at the start?

  (Works under XP - if that makes a difference).

  Thank you

  Problem solved.

  I managed to get into Rescue and Recovery manually and found that I had a backup on my C drive that existed prior to my problems. I just restore to that date and "presto!" the blue button works again!

  I'll have to spend the rest of the day, re-installing everything that has been added or upgraded from a year, but this simple step seems to have solved my problem. Who would have thought that I had a copy of backup to disk C - I thought I backed everything up to an external drive!

  Tip for any staff of Lenovo, reading this - if your security people knew more about Thinkvantage program, I could have solved this problem months ago - these are them who sent offshore to find updates to day and re - install Thinkvantage to try to get the blue button works again.

  Thank you all.

• Equium L300 - 17Q - "Enter" button does not

  As read you on the title my TOSHIBA EQUIUM L300 - 17Q enter button does not.

  screen-on the built-in keyboard works is that all the other keys work.
  I have reinstalled the keyboard from the device manager driver, then perform full system recovery and still does not.

  Hello

  It looks like a malfunction of the simple keyboard in this case, you will need to replace the internal keyboard. Otherwise, you can use the USB keyboard

• Why not Firefox 4.0 back button does not work since the homepage or google search?

  I've just upgraded to firefox 4.0 tonight, and the back button is not working properly of my homepage or certain types of google searches.

  I can reproduce this problem every time by following these steps:

  (1) open a new tab, and I get a blank page.
  (2) select the Home button. I find myself at http://www.google.com/ig
  (3) go to the address bar type in a new URI, and press return

  Now, I leave my home page and go to the new page, but I can't go back to my home page.

  Similar behavior happens if I do a search on google for the address of quick search in the upper right.

  (1) start a new tab.
  (2) enter a search term and press enter
  3) click on one of the links to research and you transition to the new page, but the back button does not work.

  It works fine if I do something like:
  (1) open a new tab.
  (2) enter google.com in the address bar and press to enter.
  (3) do a GOOGLES search arae.
  4) click a search result link.

  This works very well for me.

  In my case, I turn off the Add McAfee SiteAdvisor 3.3.1 and the problem goes away.

• Satellite A300D-158 illumination button does not work on Vista

  Buttons light Toshiba does not work under Vista.

  I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

  When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
  Illumination power button is not working do not by the press.

  This means support to toshiba button does not work properly with vista.

  I don't have these problems with XP

  Hello

  As far as I know, you can enable and disable the lighting in the BIOS.
  Go to BIOS and check if you can activate it.

  By the way; you said that buttons don t work with Vista.
  Have you tested this with Vista OS preinstalled Toshiba?

  You should do this!

• Laptop computer HP mouse left button does not

  I'm not a computer person, so I apologize in advance if I get words wrong. Information about the specifications are the HP Support Assistant.

  I have a HP Pavilion laptop G6 (product number A4A93UA #ABA)

  I am running Windows 7 (64-bit)

  My microprocessor (if it's important) is an Intel (r) Core i5 - 2430 M CPU @2. 40 GHz

  I have 4 GB of system memory

  The pointing device is Synaptics PS/2 Port TouchPad

  I hope that I didn't miss something important.

  I'm having some problems, mainly the left button of the mouse does not work. I searched and searched for an answer, but I can't seem to find a. The touchpad itself works perfectly. I can double-tap to click, press on and drag the highlight, etc.. The right button of the mouse works fine as well. It brings up a menu each time as it is supposed to. The left button on the other hand, does not at all. I had the computer for about 6 months, so my warranty is still in tact. I was hoping just to find a simple solution, before passing through the process of return to HP or Best Buy.

  At first, the left button seemed to lag. It works sometimes and not others. Then it stopped completely (all within a period of a few days), what happened a month ago. Since then, I was looking for answers and dealing with just. even if it is super boring!

  Another thing I noticed is around the time that the mouse itself has stopped working, my Start menu was allowed out entirely. When I searched the HP Support Assistant, he didn't. I had to go through the program files for access. Nothing is displayed in the start - menu it is empty with the exception of Norton, Internet Explorer, Google Chrome and the menu accessories (but inside she, notebook, Run and command prompt, are the only things that appear.

  So overall - my Start menu is almost empty, and my left mouse button does not work.

  I tried to install the new drivers, but no luck.

  I mean it's a hardware problem, but the thing on the part of the menus disappearing makes me wonder if it's a virus. I would try a Windows CD as Hiren PXE environment and see if the mouse works with different software. But it's a longshot and the likely answer is that the mouse circuit is bad. The only other thing you could try is a factory restore.

• Pavilion DV6 6c14nr: Wireless button does not work

  Has taken the plung and improved my DV6 Win10 laptop to see how it works.  Had to do a clean install, because no upgrade would not work.

  After installation, the wireless button does not work.  LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.

  Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.

  Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it.  Still does not work.

  Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0

  The details for the wireless button said drivers this devide requires additional installation

  Unless I can get the wireless button to work, I'll be forced to go back to Win7.

  Help, please.

  UPDATED - so others find this post know what works!

  Restored image backup Win7.

  Disconnected the LAN cable and activated the wireless button.

  Win7 removed and properly installed Win10.

  Wireless button works NOW!

  So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.