Simple print with the models program

Similar Questions

• Each page is printed with the word 'project '.

  CP1525nw

  All the pages I print, regardless of what program I have prints, prints with the word 'project '.   I am went through the maual, reset everything, check the tips here and may not know how to remove this watermark.

  I'm wasting toner, paper and time trying to get it to stop.

  I'm running on Mac Os X Snow Leopard.

  First of all, so much thanks to HP for a quick response.  Sorry you're solution did not work.

  I have check the updates of the system to Snow Leopard.  Behold, an update utility from HP printer (or something) worded as it was available.  Downloaded, installed and restart.  Whalla, problem disappeared.

  Go figure.

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• HPO D5560 not print with the black print cartridge

  Having a D5560 printer which stopped printing with the black cartridge.

  Thought it was the cartridge has installed a new (only use HP cartridges) no difference

  After thinking the Black just stopped - no phasing-out quality, etc..

  Ran the cartridge filter (all levels of cleaning) no difference

  Print well if I remove the black cartridge so that the Tricolor print black but it's only good to work around the problem

  I use this on Windows 8.1. It worked fine for months

  Can't think that I had installed recently HP driver updates

  I have a hardware problem?

  Thanks for any input

  See you soon

  Geoff

  OK, so it's weird.

  Just thought to connect my netbook windows 7 into the printer.

  It print very well with the black print cartridge.

  Sent a work computer Windows 8.1 and now prints fine in black of the black cartridge.

  Problem solved, but I'm losing the plot!

  See you soon

  Geoff

• How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  Hi placebow,

  Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)

  The setting applies not only at the office, but also in other areas of the shell.
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

  I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

  Hello

  Main objective of this forum is on Microsoft Products only.

  I suggest you to contact the support of Audacity for more direct action on the issue.

• help me with the dep program

  I have problems with the dep program my wife likes to talk to people on facebook. but he started it after a few seconds, add something about ons in help. I'm not good with computers

  Hello

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

  https://www.Facebook.com/

  http://www.Facebook.com/

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack
  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.
  
  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet Explorer 8
  http://support.Microsoft.com/kb/956197

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The photosmart c8150 print with the new ipad

  The photosmart c8150 print with the new ipad?

  Hi toddgas1,

  Unfortunately, this printer does not support Airprint or ePrint.

• How can I measure the length of the lines written with the Paint program?

  I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

  Hi Ralph,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the name of the paint program?

  2 have you tried to install the software of paint in Windows 7?

  3. are you able to install it? If this is not the case, do you have an error code or message?

  4. in what version of Windows was fine paint software work?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe

• It is necessary to check all documents printed with the Flattener Preview

  It is necessary to check all documents printed with the Flattener Preview before sending it to print?

  Only if they have transparency, and even then is not necessarily, although certainly will tell you what is happening to interact. I would not hesitate to consult the overprint preview, however.

• Printing problems with the Paint program

  Used the Paint program for years, no problem.  Suddenly, every time I print get a very tiny copy as if it has been reduced by about 75%.  If I try to enlarge before printing, etc., it gives me anywhere between 10 and 20 white sheets before give me a very tiny copy.  I used different printers with the same result.  I love this Paint program and would like to get back to where he was.

  And the program of mystery?

• Problem with the buyback program to HP for buying printer at special price

  A bid of HP for printers is direct until October 31, 2014, on this site:

  h41201.www4. HP.com/AdLanding/in/en/89614

  The problem is that the link above says: "this offer applies until November 1, 2014" and the link to register for the offer is not present.

  How the hell can I possibly register for the offer and buy a new printer in the terms of trade, if they continue to consider the offer after the expiry of the offer itself?

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• Computer XP versus, Brother printer with the IP address of the old computer inside info.

  my daughter has a 'new' xp windows computer, but still has its old brother mfc printer.  the printer prints the computer because its IP address is from his old computer. I have tried everything and you can't change the numbers mask IP, gateway or subnet on the printer in the menu.

  can someone help me?   PLEASE AS SOON AS POSSIBLE, THANK YOU

  I contacted the brother who was a 6 hour ordeal to get no. WHERE.  online, it says hit the + button until NETWORK appears, there no + key!

  I can copy documents without any problems.

  also the scroll on the mouse does not scroll while she has to slide to the bottom of a page to read slowly.

  Thank you!!!

  If the computer is connected with a USB cable (which is what you describe), then IP addresses of the computer and the printer are simply not relevant to the printer connection.  The printer's IP address is used ONLY if the printer is connected to a network using an Ethernet cable (which is the picture above in my previous post).

  Now that we know what is wrong, we will try to understand why the printer does not print.

  Probably the easiest way to proceed is to uninstall the printer (assuming that it has never been installed, which seems dubious) and then reinstall it.

  I'm going to assume that you don't have the CD that came with the printer (if you do not have the CD, see pages 16 to 18 of the Quick Start Guide).

  The following instructions are "Article One" of Cori Bright (http://www.coribright.com/windows/Article_One.htm) which unfortunately seems to be offline at the moment:

  1. Unplug the printer from the PC
  2. Go to the control panel and click on Add/Remove programs.  Highlight any printer software that is listed here.  Select Remove.  (Note that simply delete the Brother here software)
  3. In Control Panel, click printers & faxes.  Right click on the printer in question and select delete
  4. Look at the toolbar.  Select the file, then server properties. Look in the tab drivers.  Highlight the printers drivers listed here and click on remove for each one.  [(Notez que vous n'avez pas à supprimer les pilotes pour les autres imprimantes).]

     4. Note that brother has a 'Uninstall tool' which should perform steps 2 to 4.  I have no experience with this tool, that's why I gave you the manual steps above.  I provided the link to be complete, not because I think that you need to use this tool: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002700/dlf002701.html?reg=us&c=us&lang=en&prod=mfc440cn_all&type2=2&os=7&flang=4&dlid=dlf002701

  5. Restart the PC. Do NOT reconnect the printer!
  6. Go to the website of the manufacturer of your printer.  Search for new XP drivers for your model.  Download the correct software.  If there is no Windows XP drivers for your printer, try to watch those for Windows 2000.  In most cases, these will do almost as well.  For the Brother MFC-440CN, go here--> http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html?reg=us&c=us&lang=en&prod=mfc440cn_all&dlid=&flang=English&os=7&type2=-1 download the file named "Full Driver & Software Package."  Make sure that you are connected as a user with "Computer administrator" privileges before you do the next step.
  7. Run the exe that you just downloaded.  He has auto-démarrer Setup
  8. The software will tell you when to connect the printer.
  9. Once the software is installed and the printer connected, try a test page.  He should feel great now!

• Can not get the printer to print with the new windows 8

  I recently rec'd a new computer with the new windows program (8). Printer works sometimes, but not all the time. The setting was listed as offline. I can't understand how to get online. I have sharing enabled. I entered the paraphrase wireless often - sometimes it prints a doc and no mmore. Other times it does not print anything. Can anyone help.

  Hi MargieSchellinger.

  I'm glad to know that you've posted queries in Microsoft communities.

  From your description, I can understand that you can not print in Windows 8.

  I understand that it must be frustrating, but don't worry, we are here to help fix your problem and guide you in the right direction.

  Could you please answer this question so that I can guide you in the right direction.

  -What is the number of brands and models of printer?

  I want you to try the following method and check.

  Method 1: If the printer is offline, then try the following steps to connect to the network.

  With the right button of the new queue in printers and faxes tool and clear the printer offline use setting. This resets the registry key to the correct value.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution.

  Method 2: Please follow the links and instructions mentioned in the link to fix the problem with the printer.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  Method 3: Follow the link which provides instructions on how to install a printer.

  http://windows.microsoft.com/en-US/windows-8/install-a-printer.

  Method 4: To connect printers please follow the link and the instructions mentioned in the link.

  http://windows.microsoft.com/en-US/windows-8/add-device-or-pc-to-network.

  Hope the above information helps.

  Do get back to us and let us know the State of the question in the case where you need further help or your next post.