Simple question Slide to Web site

Similar Questions

• Can Captivate 6 reset a simple question slide?

  Captivate 6 has the ability to reset a simple question slide?  I know I could use the widgets for custom (via this discussion http://forums.adobe.com/message/4349072) questions, but I wanted to see if it's built-in to COP6.

  Structure of CBT (simplified example)

  Cover the slide list sections A, B, C, with "Show Me" and "Test me".

  1-10 of slides: demonstration, section a.

  11-20 of slides: demonstration, section B

  21-30 of slides: Demonstraction, section C

  Slide 31: Question for the section slide has

  Slide 32: Section B Question slide

  : Slide 33 Question for section C

  If a user forgets the question in section A, they are sent to revise section A again.  At the end of section A, the learner is sent to slide 31, question slide A section (using variables to know that they already do not have the issue once).

  Problem: When they are referred to the section a question, he does not answer them.

  Goal: Restore the question during the second attempt slide is still a Virgin.  Once the slide 31 pass, they will be addressed to the slide 32: 33 drag, etc..

  Thanks for all your help so far.  This CBT is one of the most advanced I did for this organization.  They have certain requirements really well.

  Micky

  Hey Micky,

  I tried to reproduce your script and it worked fine for me, it would be useful that you can share your project ([email protected]).

  Kind regards

  Avinash

• Question of firewall Web sites and Https. Help me please.

  I am trying to connect to an Https site and I get the message "internet explore cannot display the webpage."  When I run a diagnostic check, he returned with the message "unable to connect to the Internet via HTTP, FTP and HTTPS.  This is probably caused by the settings of firewall on this computer.  Check the firewall settings for HTTP port 80, 443 HTTPS port and port 21 FTP".  I use Windows XP and a dell computer.  I tried to change my firewall settings and disabled my firewall even temporarily, and I can always log on the site.  I have already connected to this site by the same internet provider on another computer (which unfortunately is no longer available for use at that time).  I need to use this site for work purposes.  Can you help me?

  Hello

  · What version of internet explore are you working on?

  · Were there any changes made on the computer before the show?

  I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• cfquery simple question - level amateur

  Hi all

  make a few simple changes to my Web site

  There is already a database running with a lot of query cfloop

  question is this:

  This code below retrieves the name of cake (#cake_name #) for line 1 in the database, but its using a loop

  < cfloop query = "cake_query" STARTROWOPTIONAL = "1" ENDROWOPTIONAL = "1" >

  #cake_name #.

  < / cfloop >

  How can I do this without the help of a loop?

  I thought that it ould be that simple:

  < cfquery = "cake_query" LINE = "1" >

  < / cfquery >

  but apparently not...

  also at the top of the code, there is already this code below, which I know works with queries of the loop, im assuming that I don't need to change for row queries?

  < name cfquery = "cake_query" datasource = "" #request.datasource # ""
  username = "" #request.username # "password =" #request.password # ">"
  SELECT * FROM gce_cakes where cake_active = 1 ORDER BY cake_number
  < / cfquery >

  Thanks in advance to anyone who can help

  If you want to access any element of a query, regardless of how many lines there, the format is:

  queryName.columnName [rowNumber]

  And if you want to print:

  #queryName.columnName [rowNumber] #.

  As for the question ... is to send the SQL strings and params to a driver of the DB and the conversion returned in a Recordset (accidentally referred to a "query" quite often in the attributes of language & CF tag).  does not care how many lines is returned from the database: 0... 1... more than one... she returns a recordset with that many lines in there.

  Make sense?

  --

  Adam

• When an add-on is configured as click-to-play with certain Web sites to as long as exceptions (don't ask again), how can I return these decisions?

  Well, the title is long enough already...

  Even if an add-on (flash, for example) is configured as click-to-play, I can define some Web sites as exceptions. Then, the add-on is still allowed to play or ever allowed to play and I will never ask any question for these Web sites again.

  The question is: how I can cause Firefox to forget such an exception/decision and treat it again through the standard? (In my case, I simply clicked the wrong button and, as it seems, can only cancel easily.)

  Best regards
  Klaus

  You can rename (or delete) the file permissions.sqlite in the profile folder of Firefox to reset all the permissions.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected

  Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab.

  You can control and manage certain permissions to all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  Note that this does not include permissions plugin, but you have a button "Forget this Site" to remove all stored data in this area.

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  With the help of "Forget this Site" will remove all data stored in Firefox in this area like bookmarks, cookies, passwords, cache, history, and exceptions, so be careful.
  If you have a password or other data from that domain that you do not want to lose then make sure you back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  If you visit a 'forgotten' Web site then the data of this Web site will be saved once more.

• How to get to the issues section of this Web site?

  Hello

  This site is really twisting my mind: I posted a question a while ago and there is no way to come back because my dashboard is empty and there is no apparent connection with the questions of this Web site section. Thanks to Google, I slipped my way through https://support.mozilla.com/en-US/questions and while I could find my question once again.

  Turning in circles again and again on a site Web is not nice for the end user. I know you seem to want people to go through your troubleshooting process - which I can understand, but all I want is to see my question already asked.

  It would be nice if you added some link somewhere - if I missed it, please point out to me.

  Kind regards
  Benjamin

  If can not pass a tab via the command line as far as I KNOW.
  
  Therefore, it would be best to start Firefox normally, and switch to the tab.
  
  You can use Ctrl + number (1-8) to quickly access one of the 8 first tabs.

  • https://support.Mozilla.com/kb/keyboard+shortcuts

• I have a simple question which I'm sure someone will be able to respond easily - I have windows xp, I've added nothing to my machine, but it does not now download updates - when I try to go on the microsoft download Web site - I can't. Help, please.

  I don't know how long this has happened, I get the shield down, but my downloads are not downloaded.

  I know that I probably won't get a response to my three questions, but I want to post a separate thank you.  It's really great that you use your knowledge to help people like me who just bumble along...  Thanks again.

  Now I have 3 questions that are not questions of direct update but I have the feeling that you can help.

  I now have service pack 3

  1. is windows better than Kerio firewall
  2. I said do not install IE8 - what you think
  3. should I perform MAM and Onecare safety scanner regularly.

  I thank in advance.

  J

  You're too kind, Joan. And, you're welcome mowst. Let's start from the beginning.
  Does firewall Kerio and AVG protect your system ?
  Go by the log MBAM, the answer is No .
  Windows native firewall is a sufficient protection when a system is on a network where the router contains a hardware firewall . A router that has a hardware firewall is not so expensive and well worth the investment.
  You can use a wired router, as opposed to a router costs a little more, if necessary.

  Now, as for the antivirus, I'm not a big fan of the AVG used by the user to type.
  I would recommend that the user typical home use AntiVir or Avast on moy. Like AVG, both are free for home use.
  For paid AVs, I would recommend NOD32 or FPROT .
  Microsoft Security Essentials, which is also free, we hope to be a solid AV, but I can not recommend at this stage.

  Installation of critical security updates, it is a needs . It seems that some malware has been able to infect the system due to the absence of the same installation. Specifically this one:

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Services\Tcpip\Parameters\Interfaces\ {f5eb5c1a-9817-46c9-b36a-6a6a007a8621} \NameServer (Trojan.DNSChanger )-> Data: 85.255.115.110,85.255.112.175-> quarantined and deleted successfully.

  Indicate if another update problem occurs that you wait not long to take care of it. Installation of critical security updates prevent many infections.

  I think that IE8 is the best browser that MS has ever released. If you choose to install it, strongly suggests you download the standalone installation package manually and Save it. Close all open programs and browsers.
  Temporarily disable the antivirus installed by following the steps in clean boot, and then install it.
  Make sure that you reboot twice when it installs.  You should receive at least a prompt to reboot, but do another after recommend an anyway.

  Now, back to the question 3. Strongly suggest you boot the system in Safe Mode and do a full scan of the system, just to be sure that MBAM has detected and deleted all the malware. Make sure you update MBAM before each scan .
  You can do it in normal mode Windows or Safe Mode with setting in network, but not in Safe Mode as long as the system is not connected to the internet in Mode without failure.
  It will take time for the full analysis to run, but it was worth. There may still be present hidden malware.
  And Yes, do at least an fortnight analysis with MBAM is well worth.
  In fact, you should consider buying the paid version, as the protection in real time, unlike the free version, and it will not come into conflict with the installed AV.
  Did a scan monthly with the OneCare safety scanner is also a smart thing to do.

  BUT , if it were a client system, I no longer trust him to bank services online or any other financial transaction.
  The system may have wrong headed by the DNSChanger trojan to web sites that were not what they seem.
  As well as information from financial transactions, passwords that you use, and no personal information stored on the system were also sent to the malicious web servers.
  To strongly suggest that you change every password you use just to be on the safe side.
  If you need or want to do transactions from this new system so the only way that you can trust , it is to format the hard drive and reinstall XP. Now that Service Pack 3 is installed and If you have the XP installation CD, you can do what is called a slipstream SP3 with the installation CD. In this way when format you and reinstall XP, it will be the SP3 and you'll save time by not having do not install several security updates.
  It's really not hard to do. Here's a good tutorial with graphics that explains it all:
  XP CD slipstreamed Windows using SP3

  And, finally, any AV or security program protects a system when the user installs the questionable software .
  Be very careful of free software, stolen software, cracked, key generators and other programs.
  Always investigate any software that seems too good to be true. As in real life, something that seems too good to be true probably is . Discover the software using Google or Bing to see what others have to say and to report on this issue.

  Be careful and safe surfing, Joan.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• HP Simple Pass only allows the connection to Web site but works

  Simple passage no longer works to log on to the Web site.  The program itself works and when I slide it opens upward new Web sites in another window, but is no longer prompting me or allow me to use it to connect to Web sites.  This started when I reset my settings of IE9 (which I did because all of a sudden, I couldn't open new tab or new websites).  Internet options reset fixed the problem of navigation, but then I could no longer use simple past.  I did a system restore, which fixed the issue simple pass, but then reinstated in the navigation of the show, so I undid the restoration.  There must be a setting on internet options that is initially simple past to no longer work, but I can't understand it.  Please help because after using simple pass for the last 2 years, I don't remember my password!  Thank you!

  Hmm... I really don't know what the SimplePass old interface looks like - it's been a long time I saw that and now I can't access a machine with something older than SimplePass 5.4.0.620

  The new version you are installing is to install an "overload", in other words, you will not remove anything.  You can install the new version and not the export/backup after the installation.

  After updating to the new Version:

  Export is something you want to do from time to time that you add or update your webcards (Web sites / passwords).

  If you don't like the idea of the hard reset driver (described previously), Dungeon it bothers me for later - the driver Hard Reset works for all kinds of 'weird' tangles: sudden SimplePass strangeness, errors "funny screen" touch touch which cease to operate or act funny, sometimes even webcams (although these can be a little tricky to fix).

  For this operation - the SimplePass upgrade, you can just kick the driver Validity Sensor itself.  Reset of driver is a good idea when installing SimplePass - it "opens", so to speak, the installation of the software is more likely to go well.

  Reinstall the existing validity sensor driver:

  Open Control Panel > Device Manager > open biometric devices >

  Right click on your validity sensor driver > Uninstall ( NOT delete)

  Reboot the laptop in a way the pilot can relocate that you connect to

  Then,.

  Download this new package SimplePass and double-click it to install just above your current version - that is to say, do not remove your software SimplePass existing, just load this version on top of what you have now.

  sp59664 HP SimplePass V6.0.100.257 Win7-8

  After you have upgraded to the latest version of SimplePass, you will be able to see the settings, Options, and '? '. Help sections in 'Splash', i.e. SimplePass when you open it.

  In addition to the export:

  You can PRINT ON your webcards.  This carries some risk; the question of the use of SimplePass is to preserve the security of your passwords.  However, if you are in danger to forget or lose your password, you can print the list.  Printing will take about 95% of the words of past, or so... true make sure you keep the list printed somewhere safe.

  Start SimplePass > Options (between the parameters 'wheel spikey' and the '? ') > print all web cards

   

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful - or who teaches you something you didn't know?

  Your HP Experts strive to help.

  Click on the star of congratulations!  It's a big 'thanks' for the author.

  Year of the snake 2013

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• I have a question comparing Dreamweaver and Muse.  Can I create a website with Muse, then learn Dreamweaver, and edit the site Web of Muse?  Or would I need to start over with a new Web site based on Dreamweaver?

  I have a question comparing Dreamweaver and Muse.  Can I create a website with Muse, then learn Dreamweaver, and edit the site Web of Muse?  Or would I need to start over with a new Web site based on Dreamweaver?

  I went the same route. I started to want to learn web design and the Muse is an excellent tool. The code it generates, however, not to use it in Dreamweaver. This could be done, I think this isn't worth it, even for a real Geek. Once you get to Muse you will find there are things missing, stuff, you want to do, but are just tough in Muse or you can buy a widget. It is possible in DW and you get which through subscription, so it makes sense. Me what I know now, I'll go directly to DW to learn, except if you want results right now. If you don't want something to cause I stay with Muse and maybe learn to animate CC to add some pizazz to the site. If you only want a simple layout and a couple supporting stick with Muse pages if you want a larger site use DW. Good luck and check out this page to Muse on Google Plus Adobe Muse for beginners - community - Google +...

• Really simple question of Studio Site

  So, it's a simple general question Site Studio, that I can't seem to work.
  
  We have a content server with three Studio Site Web sites created in gR 10, 4 houses. I would like to add another, but I can't understand how to add it.
  
  Can I simply create a new file in project manually, or is it possible using the Web Client or Site Studio designer?
  
  Thank you
  
  BTW - I have been through the Site Studio manual note and run and could not find a reference of how to do it. I know I'm missing something.
  
  Published by: Desmo December 6, 2011 09:39

  You can use the Designer Studio of site for this.

  Open the designer, the connection of the Site Manager click on 'Edit' below, since the details of Site Connection page, enter the URL of the Cgi server & click on 'Connect', click on 'New' & you are on your way.

  Also, please review the documentation of the Site Studio. This process is detailed well in there & they have a number of quick notes that might help in some post-installation configurations. Let me know if you do not have the URL and I'll post it here immediately!

  Let me know if this works for you and answer your question! :)

  -ryan

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• I want to put a link Firefox in a Freeware section of my Web site, is there any question of law?

  Godd afternoon,

  I have a company Web site and we do a section of freeware software.
  I want to put a link Firefox (http://www.cloudinfo.pt), is there any question of law?
  Can I host the package or simply insert the link?

  Thank you.

  Fernando

  Hello Fernando, there shouldn't be any problem with this, but for more details, please refer to Mozilla brand to https://www.mozilla.org/en-US/foundation/trademarks/policy/ policy - especially the part about software distribution & linking.

• simple question of Web service

  I use a Web Service to publish data, and this question is, I am sure, from my limited knowledge and use of the web servers.

  I am able to set up a 'add' method, pass 2 numbers to the web server and the web server to return a value. Simple. But, I don't know what to do when I want to get the current value of something that is being updated in a loop.

  For example, let's say I have a VI as below and that the user wants to display the current iteration of the loop in their browser, not permanently, but only when they ask for it. I won't use this VI as the method to call. Instead, I would rather pass the current value of a designated only VI VI to return the value of the digital control to the Web server. But I have no idea how (or if) I can change the value of iteration to a method to be called. Does make sense?

  I thought by using session variables, but this requires constantly written to the session variable in my code, which is probably not a big deal, but it would be nice if she only questioned the current iteration when the user asked for it (kind of like 2 numbers are added only when requested by the user in the example of OR). I'm looking for a way to simply return the current value, only when requested by the user.

  

  You can do this, but things get a little complicated.  The web server is its own instance of the application, and I don't think you can (or wants to) have a VI running permanently inside.  When you compile an application with active web services, you get two instances of application - execution of the application, the other inside the web server.  I guess that your loop will run in the instance of the main application.  Put a global functional in it that stores the value all what you want to be questioned on the web and make sure you that VI accessible via the server of VI.  Then, in your web services VI, open a connection to the VI for that functional overall server and run, by reference, to get the value that are stored.

• Any web site to ask a question on server 2012

  Is any web site available as answers. Microsoft.com to discuss a questions or queries the server of 2012?

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Tricky

• is there a simple guide on how to use Windows Media Player to play MP3 files on a Web site

  I'm designing a simple website to a friend. They are singers and want 3 or 4 songs sample of people to listen to on the site.

  What is the easiest way to do this (I m not technical, it should be easy to understand)

  Idea is that the user accesses the page and chooss a song they click and hear 30-45 seconds of a recorded sample (MP3 file)

  Strive to do that. I thought it would be easy but can't seem to find a simple way to do it.

  Can it be done using Windows media player (records are MP3 files in the Player Windows Media.

  Help appreciated

  Ian

  I'm designing a simple website to a friend. They are singers and want 3 or 4 songs sample of people to listen to on the site.

  What is the easiest way to do this (I m not technical, it should be easy to understand)

  Idea is that the user accesses the page and chooss a song they click and hear 30-45 seconds of a recorded sample (MP3 file)

  Strive to do that. I thought it would be easy but can't seem to find a simple way to do it.

  Can it be done using Windows media player (records are MP3 files in the Player Windows Media.

  Help appreciated

  Ian

  If you have a music video, your friends sing you could install a flash drive on the Web site. If it is just an audio file, you must download the file to a file free host then post a link to the file on the Web site.  If Windows Media Player comes into play depends on what media player the person clicking the link used as their default media player. Windows Media Player will play no role in the file on your website. The link below contains a list of free audio files, hosting sites. There are many others that you can find with a simple search on Google.

  http://www.audiohostings.com/

  See also http://www.tripwiremagazine.com/2010/08/20-free-online-audio-players-for-your-websites-or-blogs.html