simple, the best way to import data, music computers betwqeen from pc to pc to laptop

I want to transfer music from my pc to my phone, what is the (best) easiest way?

Based computers involved and the amount of data involved. You can transfer data using a Flash DRIVE, burn a CD/DVD-R, on the network, pulling on the hard drive and attaching it to the target machine, etc.. It is not uniform so if you want a more specific answer, provide the missing details on your systems and your data. MS - MVP - Elephant Boy computers - don't panic!

Tags: Windows

Similar Questions

  • The best way to migrate data... Opinion please...

    Guys,

    I'm working on a solution for a customer who needs to move in a new SAN SAN data.

    Existing SAN is attached to the ESX server farm and is very close to the location of a new SAN. In your opinion, what is the best way to move data without interruption to VM ESX farm?

    I know we can do SAN replication, but right now, I don't know if the SAN is still the same provider.

    I know we can do Storage VMotion. In this case, he should present the new SAN somehow for the existing ESX servers.

    I know that we can probably use the converter to migrate virtual machines. This can take some time because we would go over WAN.

    What are your thoughts?

    Thanks in advance for your comments!

    With 4 TB of data, I wouldn't pass on the replication SAN or WAN solution of optimization of the property, and it can fly quickly with 4 TB of data that you use storage vmotion which basically depends on how your WAN links are, if if its quick to go for it.  There is not another free solution then this but if you can manage somehow to make backup of system state of all virtual machines, and then you can ship these backup data to remote locations and import, save back to clusters.  You have to do the actual calculation how fast you can Transfer data from the siteA-> siteB Mbps?  This will give you a clearer picture of how long it will take and picture plan here.  I could do that during maintenance or weekend windows that are the least impact to users and systems.

    If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

    Kind regards

    Stefan Nguyen

    VMware vExpert 2009

    iGeek Systems Inc.

    VMware, Citrix, Microsoft Consultant

  • What is the best way to import and work with mxf files in first CC2015?

    I am trying to find the best way to import MXF files in first, like many people there seem to be issues.

    I have already imported using first CS6 but I got cut short clips and audio dropouts. I decided to start over with CC2015 first, but this time I'd like to do things and once. Should I use prelude first?

    I run on a Mac Pro (mid-2010)

    OS X El Capitan version 10.11.1

    All good, got sorted. I use the prelude.

    Thank you!

  • The best way to pass data when browsing

    By taking the case where an action method is called and he chooses navigate to another page.

    What is the best way to pass data from bean of old media to the new (probably in the execution of the action method)? I am currently using beans of spring session scope as the support of beans.

    Take a look at:

    It goes between your commandLink or commandButton control:



  • What is the best way to get a SVG file generated from After Effects?

    What is the best way to get a SVG file generated from After Effects?

    Is there a script to do this? I use the SVG file directly in my work. I did research online, but find that it has no native support of EI to achieve.

    I found some scripts online, but they convert output Adobe AE to the JSON file. Is there something similar available for the SVG file?

    Thank you

    AE makes pixels not vectors, so it's not possible.

  • What is the best way to import and export images from the 5 d Mark II?

    Hello

    I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

    My questions:

    (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

    (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

    (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

    I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

    > used first lately

    A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

    1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

    For CS5 and later versions, the easy way to ensure that your video and your project

    See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

    - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

    2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

    1080 p http://forums.adobe.com/thread/995191 some work, some are not

    In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

    In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

    And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

  • What is the best way to import my address and e-mail of Pegasus in Thunderbird?

    I use Windows 7 x 64. I have a number of files and many electronic addresses in the Pegasus Mail client. I'm looking to migrate to Thunderbird. Can you tell me the best way to move my files to Thunderbird?

    Thank you
    Allen Hill

    For your address books, can export you to a format such as CSV?

    To move e-mail messages, the cleaner is to use the IMAP protocol. Then your new client look just the same files you had in Pegasus.

    Unfortunately, email clients tend to use their own systems of storage of e-mail owner and there is no commonly used standards that could help to transfer between clients. If you can export files in mbox format, then Thunderbird can use.

  • What is the best way to import only raw files in Lightroom?

    I have hundreds of files who believed and jpeg files.  The simplistic 'treat raw and JPEG as separate files"cannot remove all jpeg files that some have slightly different names than the raw (several versions of each raw file jpeg) files.  The only way I can find easily select only the raw files in a folder is to move all the non - raw files to a different directory so that Lightroom cannot see them, do the import, and then return the files to the original directory.  Needless to say it's far too much work to consider moving to Lightroom so I have to do for each of hundreds of files.  Is there an easy way to filter by file name pattern and expansion?  I read on some plug-ins that sound as if they must have worked, but so far none seem to do the trick.

    Yes, and that's what I thought. Just one question to be sure.

    You can do all this with LR and you can also copy the images from the card or the camera in your specific directory/folder or any folder you like and or create a folder at the time of the breeding and importation. All your steps are wrapped in a single process, no bouncing around a program to another.

    There is a good article on the net about how to change an import LR preset with a Notepad text editor, for the most part all you want to do.

    I had been using the app bridge Photo Downloader for the year to get images of maps to the folder of my choice, the year and place the images in subfolders by date shot with the format 02 09 (day) (month) (0209). This chain of folder is not available in LR. He wants to do something like 2016-02-09 or something like that. But I edited a "Preset" I created to make the exact record of naming (0209) and put my pictures in the folder of higher level of the year. So now if I shoot images spanning 2-3-4 days then copy and import with LR, LR creates 2-3-4 record names and place these files in the top-level of the year folder.

  • The fastest way to import data for large tables

    Hi friends,

    I recently joined a billing product put up a team for TELECOM giant. Under the procedure of installation/initial tests, we have huge data (size of almost 1.5 billion records / ~ 200 GB of data) in some tables. Currently I use impdp to import. It takes a long time (almost > 9 hours to load these data).

    I tried the ways below to import the data (all of these tables is partitioned):
    1. normal impdp (single thread that is, parallel = 1): it takes a long time (> 24 hours).
    2. normal impdp but partition-wise. It was completed in relatively less amout of time compared to the 1st method.
    3 fall drop the index, framed adding another scheme in the same forum that includes data, and then recreate the index (whole process takes about 9 hours)

    My questions at all:
    1. is there any other way/trick in the book that I can try to put the data in less time
    2. what I pointed out that even if I give parallel = 8 or more, sometimes parallel workers are laid and sometimes not. Can someone tell me why?
    3. How can I come to know (before running the impdp) that my parallel article will spawn parallel workers or not. As to how I will come to find out, I searched this topic but without success.


    I don't know what strategy to follow, because it is an involved and repetitive task for me. Because of the task above, I am not able to focus on other DBA tasks because of what comes to me.

    See you soon,.
    Malika

    assuming that you have a table with 3 clues, then create a script for each index (reblace index_name_n with your index name) and start them at the same time, after the importation of the table is complete

    DUMPFILE= or NETWORK_LINK=
    DIRECTORY=DATA_PUMP_DIR
    LOGFILE=
    CONTENT=ALL
    PARALLEL=1
    JOB_NAME=IMP_
    INCLUDE=TABLE_EXPORT/TABLE/INDEX:"IN('')"
    TABLES=.

    Change the following settings when importing:
    increase pga_aggregate_target
    increase db_writer_processes
    db_block_checking = false
    db_block_checksum = false

    the value undo and temporary ts autoextend
    Set noarchivelogmode
    create logs of restoration of 4 GB

    HTH

  • What is the best way to read data series high speed?

    My goal is to read 14 bytes of binary data of an instrument on the serial RS232 (460800 baud) to 2000 Hz. I didn't get a card series high speed again so I am currently using the standard serial port (115200 baud) and reading at 400 Hz I have configure the port series, empty the buffer, and then enter a while loop to read incoming data. I have a visa 14 bytes read by interation seconds 0.0025 (400 Hz). However it seems that the sensor is spewing data faster that labview can read because the bytes are accumilating in the port. After some time the buffer fills and the program fails.

    Is there a better way to do it?

    Would it not be better to read the larger quantities of data less often, for example as 1400 bytes every 0.25 seconds?

    Thank you

    Hello

    I think it would be good to read several points in a loop, and keep the loop less than 1000 Hz.  I found in the past, have something to run faster than about 10ms tends to fall down when windows loses interest in the process.  So yes, choose the slower you can get away with reading samples - for example to read every 10ms and read 20 samples every time. You should be able to configure your serial port in order to buffer the samples that I guess.

    Also and the issue of windows - if you use a loop "timed" instead of a while loop, so you can force it to an integer value including the ms.  You can also assign a dedicated processor and set the priority to 100, which means that it is less likely to elapse and decide to scan your hard drive for viruses or consult your account e-mail or what he does when he's bored with your program.  Also it "' tells you if the loop has taken longer that planned to run - you can use this to help iron out bugs etc. - report and/or to the user if you missed a few samples.

    http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/timed_loop/

    JP

  • Identify the best way to transfer data between applications in Essbase

    Hello Experts,


    One of my clients uses Hyperion System 9.3.1 and they try to understand if the partitioning might be a way to automate the transfer of data between applications Essbase (using the partitioning of replication).

    The challenge, they say, is that they may need to send the budget a source application (SLVQ) data to an application (consolidated) target. Data can be changed in Conso and returned to the SLVQ for review.

    They get warnings when they define partitions in both directions because the partitions are overlapping, but it works.

    Are there concepts or reasons why they should not use this function (transfer in both directions)? Is this something that is used by other companies?

    Their alternative is to export data in text file, then reload with rule files. It seems more difficult to define (MaxL scripts-> text files-> rules of files) with more chances of getting errors. Is there some other effective solutions which we do not understand?

    Please suggest.

    Thanks in advance

    Kind regards
    Jingle

    Hi Lisa,
    other than the scores, text file
    There are two more, according to my knowledge

    1 XREF
    2 HAL (Hyperion Application Link) using adapters essbase

    We use the XREF and HAL to our company to transfer data between applications according to the needs.
    I hope this helps.

    Dornakal.
    www.dornakal.blogspot.com

  • What is the best way to copy my music files on to to a new computer?

    I've heard some people complain that iTunes game, so I don't know if I want to go this route. iTunes will let you not only move your files from your iPhone. I use a program like AnyTrans but it do not put my side stars everywhere. Should I just export the iTunes library to Airdrop or connect my two computers via the USB port? If I do it this way it will sync on both computers then? Apple seems to have made this much more complicated, then it must be, any help would be greatly appreciated!

    Full instructions are here:

    How to move your iTunes library to a new computer - Apple Support

    Make sure that you create a new backup first.

  • The search for the best way to transfer data from the iPad 2 iPad Pro 7.2

    I want to forward all the Info/settings of my iPad 2 to a new iPad Pro 7.2

    See https://support.apple.com/en-us/HT201269

  • What is the best way to import fonts in Dreamweaver 7714 build?

    I tried several things. I did manage fonts > local Web fonts > Browse > click on the police of the web. The fonts are appearing in the bottom box labeled "Current list of local Web fonts" but when I try and use them in the CSS, they are not applied. I also tried to use '@font-face' with the same result - nothing. If anyone has experience this problem before, I would be greatly appreciated the work of they have found success... Or someone point out a stupid mistake, I do... Thanks again.

    RM

    To view the TypeKit web fonts, you need a local test server or just download your site and test on the remote server.

    I don't know what other fonts you use, but I am able to see Edge and Google Web fonts in Live View mode.  Creation mode? Fagetaboutit.

    Nancy O.

  • Best way to import images

    I'm looking for the best way to import pictures to my Mac. I currently use iMovie to import my images, because I come from the end of 'consumers users', but I'm looking for more professional way.

    All of my cameras use SD cards and put all the images in a folder/quicktime file called "PRIVATE". It's all my research, AVCHD. When you import into iMovie, it seems what I push in 60 fps down to 29.97, that's why I was looking for another way. -Another question is also, when I import iMovie, which makes the 'Mac' images only until his change, that sucks. I need a good way to import images in case I ever need to use a Windows machine. iMovie puts the icon (AIC) on the files.

    One of the cameras with which the footage was shot was a JVC GZ-HM35BUSD. (Some cheap Wal-Mart camcorder), but the other (same AVCHD Formate) images were shot using a really expensive sony camcorder. ($600). (Not sure of the name)

    Thank you

    David

    I have directly from AVCHD editing all the time and it works fine for me on several systems, including an older macbook pro. I suggest avoiding if possible the transcoding. It takes a lot of time and if you don't do this right, you could surcompresse and a generational loss.

    I would not go and delete unused items after I'm done editing, just to save space. Also, if it's projects, I don't care, I sometimes export final movie into something easily playable outside the Organization (like mov or mp4) and then delete all the media source. This is NOT recommended if you work in a professional manner. In this case, you must check in all. But for prosumers, there may be a lot of projects where you just want to put together a quick edit and then export it as a final movie for viewing online or elsewhere. In this case, you cannot hold on to all your layer to always source footage.

    It really varies by user, but like I said, if you work professionally, or aspiring to, you'll need a way to archive and back up these archives. If you work from the band, then comes the labelling and store the tapes are an acceptable backup for the media associated with a certain project (of course, you will still need to save and save the project itself). But if you work from tapeless formats, then you will need several hard drives with lots of space, archive and everything back up. The good news is that hard drives get less expensive, bigger and stronger all the time. I had two lacie 1 TB hd for a few years now with zero problems (before there 2 lacie 500 GB for many years, also with 0 problems). But I'm still parnaoid that #1 will go while #2 is still in the Act of saving. Or they'll both go at the same time. Ouch.

  • Maybe you are looking for

    • iPhone SE: "no service," cannot see network after 9.3.5 update

      Activated my new iphone 6 SE. It was working fine. Installed the 9.3.5 new update. Phone immediately travel to 'no service,' unable to connect to the cellular network. Can connect via wi - fi. Restarted. Cellular service or turned off, turn off "find

    • I want my iPhone to shut up when you wear Apple Watch

      II have not entirely faced with notifications when you wear my watch - actually, I want my iPhone to remain silent at any time when you wear my watch and for haptic only on my watch alerts (without audio shows, except when answering a phone call on t

    • HP OfficeJet 6600: Printer Office scanning does not work

      I have 3 PCs that have been updated with 10 windows and all had the upgrade to the software and drivers proposed for 10 Windows of the software of the printer. Alone is capable to scan himself. This is done by using the HP Officejet 6600 icon to acce

    • R7800 cannot see shared folders SMB VPN

      Hello I started to use VPN on the R7800 service, and I can use Remote Desktop connection Microsoft 9.3 iOS app to connect to my computer at home (8.1 Windows) through the internet, as if I was on the LAN (192.168.1.2). However, the apps that read SMB

    • DV7-1125ef: BIOS/insydeflash error. HP GIVES NO ROM 2 FILE THE RETURN

      Hi, there is a previous post called BIOS/insydeflash error. HP GIVES NO ROM FILE I have the same problem. My Bios version is F.12. Trying to update with the files of available bios (F.2C and F.2D) gives an error message: no ROM file in this directory