SimplePass scanner stops working when the laptop sleeps

Similar Questions

• In Vista, you receive the error message "Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working" when the windows sartup

  I get this error message when starting windows - the message is:

  Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working and I'm not that mean?

  and since i ' v got this message I can't use internet explore properly and when I lick the icon to lunch the internet explore I have a blank page, but if I do a right click on the internet icon one select run as administrator, it works without any problem can someone help me?

  Ahmed atta

  Egypt

  Hello

  Please let us know if you are facing problems when you use Internet explorer on the computer and is the fixed startup error number.

  Use the method to send the snapshot to the question below.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• E7440 latitude: Wake-on-Lan works when the laptop is turned off, but not when it's put into hibernation

  I have a Latitude E7440 running a clean install of Windows 10. If the computer has been stopped, I can use a Wake - On - Lan Magic Packet to the MAC address of the Ethernet port (as described here) to turn the computer back on. But if the computer is in hibernation, it does not work.

  Probably, it is that when the computer is in hibernation the link on my switch light is off, but when it is stopped, the link light is on.

  So my question is: How can I get this phone to maintain the LAN port when hibernation, in the same way on shutdown? Thanks in advance.

  smammy,

  Click on the link below for a possible resolution following on problem of your computer network settings.

  How do I enable Wake on Lan on Windows 10

• Keyboard stops working when the computer is idle

  I have an ASUS desktop and windows 7.  When the computer is idle for a few minutes, the keyboard farm operation.  The mouse works fine.  Tried a new keyboard and no solution.  Tried a different USB port and the same thing.  If I restart my computer, it works fine until it is idle for a few minutes and then stops again.  Really frustrating.  any ideas?

  Original title: keyboard closed unexpectedly

  Hi Majohnson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This is not the exact model. your ASUS computer?
  2. The issue has started happening recently? If so, did you do the computer-specific changes before this problem?

  The question could arise is there some problem of corruption of pilot partners or a third party service interferes with the function of the normal keyboard. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  If you have any security software installed on your computer, try to temporarily disable the security software and check if the key words work properly. Subsequent update of the security after a repair software.

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See method 3 for additional assistance on the issue.

  Method 3:

  Uninstall and reinstall the drivers USB controllers. Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the keyboard and test to make sure that the problem is solved.

  For more information, please refer to:

  Updated a hardware driver that is not working properly

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Flash Player stops working when the computer is restarted. Why? It is always enabled.

  Why is Flash Player stops after restarting the computer to work? I have download Flash Player several times a day. Norton is the cause? When I re - download, I get a message that I have not sufficient user privileges, but it solves the problem, anyway!

  Unlocker is my go - to for fixing the files in this State.  It is probably easier to do it manually: Unlocker - free download and software reviews - CNET Download.com

  That said, the permissions being stripped on files is a symptom, not a cause.  You might get away with the lock and blowing these files and things will work normally after that.

  The point I want to drive home, it is that it would be smart to take advantage of the opportunity to save something essential.  You could just as easily be the first signs of catastrophic disk failure.  Having lost my share of data that has not been backed up, I always count these early warnings as gifts and take seriously at this point.  There are many good solutions free/good market online (especially if you don't have a lot of data that you really care), as well as traditional approaches to removable disk.

• Stops working when the 'commissioning of the signs... ". »

  You just bought Adobe Creative Suite 5.5 Design Standard.  InDesign won't load.  I get the error message:

  Adobe InDesign CS5.5 has stopped working.

  A problem caused the blocking of the program works correctly.

  Windows will close the program and notify you if a solution is available.

  Illustrator and Photoshop, load and seem to work very well.  (Does not go beyond loading program.)

  I've uninstalled and reinstalled the suite but still can load only Photoshop and Illustrator.

  InDesign will stop loading when it gets to the "marketing of the signs...". »

  I change the resolution, so that my monitor displays correctly.

  Any suggestions?

  Thanks John - I tried the Ctrl/Alt/Shift thing, but he did not respond at all and went straight to the error message.  So, I decided to see if I could save the InDesign defaults from my old hard drive, because he had no one in the new facility to rename.  It was recoverable from the old installation, so I put it in place where it should have been on the new computer, and voila, InDesign launched correctly.  I guess for some reason any, it was not installed with the program in the first place.

• Photoshop "Stops Working" when the text tool is used.

  Whenever I try to use the tool to type in photoshop, I get a window indicating that Photoshop has stopped working.

  I have not yet installed the new fonts, this is a new laptop.

  What I do do ti fix this problem?

  I have Photoshop CS5.1 64 bit and I'm running on Windows 7

  A corrupt police?  This happens. I just found this old thread:

  http://forums.Adobe.com/message/2845553

• MG6320 Scanner Stopped Working - "Set the PC to start scanning.

  I got this printer/scanner for several years, and the scanner has always worked.  Today, it doesn't.  I put the paper on the tray and then select Scan and finally select color to start the search.  It has always worked.  Today, I get the message on the screen, "set the PC to start scanning."

  I have the scanner set to send the images to my computer, and he has always demonstrated on behalf of my computer on the screen.  Today it just shows "Local USB" and cannot locate my computer.  I tried to check the status of the wireless network, and which indicates 100% with a signal strong.

  I did a search in this forum and found positions that were similar, but not identical to my problem.  In these messages, people were getting this message (set the PC to start scanning) from the beginning.  Mine has worked so far.

  Thanks in advance for all you can give me advice.

  In fact, this program was not running.  It must have been in the past, because this is how I've always been analyzed before.

  It worked!  Thanks much for the reply.  I really enjoy taking the time to answer.

• Toshiba with vista touchpad mouse stopped working after the long sleep.

  I left my Toshiba laptop with Vista only for a few hours and when I came back I had a lot of difficult to resume. When he did power to the top of the screen is fixed to the external monitor, and touchpad mouse will not work.  I did a system restore to several days ago, but it did not help.  I also installed service pack 1 and 2, hoping that would be useful, but it did not.  What should I do to get the touchpad mouse works again? I have the back of the screen, but not the mouse.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• MG6320 Scanner Stopped Working - "Set the PC to start scanning ' WINDOWS 8.1

  I had this problem when I was on Windows 7 and it is solved by what Ramona suggested:

  "The Canon IJ Network Scanner selector EX must be running on your computer to scan using the control panel of the printer.  To start the program in the Start Menu on your computer, select all programs, then commercial of Canon IJ Network Scanner selector EX (folder), then IJ Network Scanner selector EX (program).  Once launched, the program appears in the notification area of the taskbar. "

  Now I have a new computer with Windows 8.1 and can not find ' all programs and utilities of Canon, etc.»

  Can someone please?  I asked this question at the end of my other post, and he had 39 points of view, but not answers.

  Thanks to all those who can help you.

  Hi GlassHalfFull,

  Launch the IJ Network Scanner selector Windows 8.1 EX, the Windows start screen, you can just start typing 'IJ' to bring up the window of research, then in the section drop-down menu above the text field, select 'Everywhere' and continue typing "Network Scanner selector EX" until you see the program appears as an option to click on.  Once you click on "IJ Network Scanner selector EX", it must launch the program.

  Another method, you can use would be to go to the Windows start screen, then to the bottom of the window under the tiles, you should see an arrow down in a circle.  Click on the arrow, then go and find the Canon utility section and click the icon for the IJ Network Scanner selector E.G.

  I hope this helps!

• RV042 Port forwarding stops working when the firewall is turned on

  Hey all,.

  I have an on a single WAN RV042 router and internal network. I have configured port forwarding as follows:

  HTTP[TCP/80~80]->10.0.0.6
  HTTPS[TCP/443~443]->10.0.0.6
  IMAP[TCP/143~143]->10.0.0.5
  IMAP SSL[TCP/993~993]->10.0.0.5
  SSL[TCP/587~587]->10.0.0.5 SMTP

  Everything works fine when I have the firewall turned OFF. However, when I enable the behavior is erratic. 1 of 10 attempts to connect to ANY port transmitted works. Almost all attempts at expiration time.

  Note that this happens even if you only use the default firewall rules (which must be circumvented by the port translation I've read in other posts).

  My second try was to create rules to Firewall manually, the substitution of the value default ones. I tried to add source WAN1 rules (where is my connection) to the ONE and UNIQUE IP on each port. Nothing seems to work.

  I don't know what I'm doing wrong, it's really bugging me. I had to disable the firewall if we can access our servers from outside the office. It shouldn't have to do.

  Do you know what I might try?

  Best regards

  Theo

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  Thank you!

• Menu stops working when the course is over

  Captivate 6, never send resume data are not checked, published for AICC. Course titles and restarts correctly until I get to the last slide. At that time, when I raise, I go to the last slide (which is expected) but I can't use the menu to return to an earlier point in the course. The menu opens, the slides are links, etc, but when I click, nothing happens. The project is implemented to stop the project at the end.

  Has anyone seen this?

  OK, so my next suggestion is to check if the Skin Editor is defined for the table of contents allow navigation only to slides that are visited.  Maybe when get you the course module and the LMS bookmarking shunts you have too to a later slide, the fact that you have already visited the previous slides is not in the content.  This means you are stuck on this later slide and the table of contents do not allow you to click on the items.

  If this isn't the case, it's maybe a problem with your LMS.  Publish the same SCORM Cloud modules and test to see if the same problem arises here.  Try to use SCORM AICC intstead to see if the bookmark is handled differently.

• Digital Persona software stops working on the Pavilion dv8-1250ea

  Hello!

  I noticed that Digital Persona, the software for the JJUJ scanner integrated on my HP Pavilion dv8-1250ea stops working whenever the laptop wakes from standby or hybernation mode. On the login screen, the icon on the right referring to the fingerprint reader warning flashing at a rate of about twice a second and the following note says "fingerprint reader not detected". So I'll type the password manually, but the cursor in the field password prevents jump at the beginning of the field at the same pace, and it seems as if there is a current discount. The only way to log is press the 'end' key immediately before each character in the password, which is a disappointment.

  I recently downloaded an update for Digital Persona, but it has not solved the problem.

  Any ideas how to fix? Thanks in advance!

  Andrey

  Here is a work around, see if it works... You will need to go to Device Manager, depending on what hardware you have; AuthenTec orvalidity... Double-click on it... who will launch the Properties Windows... Click on tab power management... this tab, uncheck the box that reads "allow the computer to turn off the device to save power"... and see if it works... ' "

• Fan has stopped working on the satellite

  I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

  I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

  How long they tend to take to fix these things?

  Hello

  I put t know 100% if they work on Sunday, but I presume that they don t
  However, can you please tell what camera do you use?

  I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
  So if the fans don't turn you should not turn on the laptop.

  But maybe the cooling modules run only with the lower speed?
  This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

• Moto G4 - push notifications to stop functioning when the phone is idle / inactive

  Hello!

  I have a very annoying problem with my G4 bike purchased in the UK.

  Problem:

  My push notification comes to app and gmail to stop working when the phone is idle / inactive.

  When I use any application or when I put just the phone side push notifications work fine. They appear on the lock screen and beep.

  After a few minutes of not using the phone, the message to stop the spread. The sender indicates that a tick and the Moto G4 does not show notifications of type push until the phone is activated and unlocked. It is very annoying, because I already missed several attempts to call. This problem occurs with the Wifi or data plan. It is not a What'sApp of settings as it works very well for a while.

  Text messages and phone calls work well, just a data plan seems to go off when idling and never come back until unlocked (even then it takes a while). WiFi seems somehow to maintain a connection.

  I tried:

  • change What settings the sApp
  • disconnection/connection gmail account
  • remove the operating system of the device cache
  • disable the whats of ap battery saving options and all services appear to be relevant
  • WiFi seems somehow to keep the phone, but only data stops immediately, sending fn when idle
  • Restart in safe mode-> the same problem with meeting places. WiFi seems to work, data plan do not when idling

  Is this a known issue? Everyone knows the problem? To me, it seems that the camera seems to move from the internet and do not reactivate until this that unlocked.

  Any suggestion would be appreciated,

  Thank you!

  It seems to work now after clicking: 'Reset the settings App' in the top menu right in "parameters - apps-> gear-> battery optimization"!

  I haven't seen this solution anywhere else. I did the reset done only because I tried to disable optimization for almost all applications gradually. Without success, I clicked on 'Reset the settings App' and suddenly push notification for all work! Yes!