Simulator chips and debug BB10 Alpha

Similar Questions

• BB10 alpha device connected to Linux but poster in IDE "not connected"

  Hello

  I use Ubuntu 12.04 and bbnk 10.0.6 for development. My alpha camera can connect to Linux and I can download the configuration previously debugging token created on another Windows XP PC to the device. I also import my key sign created previously on Windows to the current Linux environment. But now the 'not connected' USB to IDE BB10 poster display and cannot deploy any application on the device. What is the reason? He cannot mix the sign key and debug token created on a different platform like Linux vs Windows? Help, please. Thank you.

  Kind regards

  Pigling

  It works very well.  A few tips to remember:

  -Set :-> Parameters of storage and access-> USB connections (connect to Windows)

  (Automatic detection does not work with Linux)

  -Make sure development Mode is set to 'works '.

  S ' sure "ifconfig usb0" returns something, preferably 169.254.0.2

  S ' ensure that you can test the DA dev mode IP: 169.254.0.1 (this is the default)

  If all the above works, then you should be able to use it with the IDE.  If the IDE thinks that it is not connected, ignore the error and try anyway.

• Possible to update BB10 Alpha on Mac?

  Hello

  The upgrade of the BB10 alpha page seems to ask you to download the last Director of office for Windows (even if you are on Mac).

  For Mac users, is it possible to upgrade to the new version of BB10?

  Thank you!

  The Desktop Manager with the update for the Mac is now online, and it does not (unlike Windows)!

  https://developer.BlackBerry.com/blackberry10devalphas/update

  I've been on 188 Bundle, so first it was last updated at 197, and after my DevAlpha restarted and then reconnected, it appeared today updated.  It is now installing!

  Nick

• VG224 and Verifone xx810 chip and pin component terminal modem

  Hi members of the community.

  I have a very specific problem I'd appreciate help with if anyone else has experienced this or something similar.

  We have a VG224 that provides analog lines for fax machines mainly on our campus. Recently, we had our Department of finance use machines to chip and PIN on these connections. Previously, we used streamline machinery, and they connect properly.

  The specific case I have is a Verifone vx810 machine which is connected to a VG224. The Verifone unitis able to deal with success and to authorize a transaction, but it cannot complete a download batch process or a TMS. I talked to the support company that rent us machines to and identified that the computer uses the following baud rate, bits of parity and stop for 2 different operations:

  For transactions: 2400 baud, parity/stop 7e1 (this works)

  For the batch upload/TMS: 19200 baud, parity/top 8n1 (it does not).

  In the case of the upload of batch/TMS, the machine connects, gets a connection to the remote end to the PSTN for about 10 to 20 seconds, then he tears because the modem negotiation fails. I've read various articles on forums CIHI and others say that data rates high speed can be a problem for the VG224, but nothing to suggest a problem with 19200. I also tried installing on an ATA186 and ATA showed the same symptoms, so I am inclined to think that this isn't just a firmware issue or bug with the VG224. I tried 3 different chip and PIN machines of the model vx810 and all have the same symptoms.

  Here's a copy of my current VG224 config. The VG224 is recorded in the CUCM via SCCP.

  version 12.4

  no service button

  horodateurs service debug datetime localtime

  Log service timestamps datetime localtime

  no password encryption service

  !

  hostname vg224

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 4096

  !

  AAA new-model

  !

  !

  AAA authentication login default local radius group

  the AAA authentication enable default

  AAA authorization exec default local radius group

  failure to exec AAA accounting

  action-type market / stop

  RADIUS group

  !

  !

  !

  AAA - the id of the joint session

  clock timezone GMT 0

  clock summer-time recurring UTC 4 Sun Mar 01:00 4 Sun Oct 02:00

  IP source-route

  IP cef

  no ip domain search

  !

  !

  No ipv6 cef

  !

  stcapp ccm-Group 1

  stcapp

  !

  stcapp function-access code

  !

  stcapp speed dial feature

  !

  !

  voip phone service

  Modem passthrough codec g711ulaw nse

  !

  !

  voice-card 0

  !

  username password

  Archives

  The config log

  hidekeys

  !

  !

  !

  interface FastEthernet0/0

  no ip address

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/0.644

  encapsulation dot1Q 644

  IP 10.1.160.4 255.255.255.0

  !

  interface FastEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  default IP gateway - 10.1.160.1

  !

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 10.1.160.1

  no ip address of the http server

  !

  exploitation forest installation local6

  interface FastEthernet0/0.644 source journaling

  logging

  SNMP-server RO community

  SNMP server location

  !

  Server RADIUS auth-port 1812 1813 acct-port host

  Server RADIUS auth-port 1812 1813 acct-port host

  RADIUS 3 server timeout

  RADIUS server key

  !

  control plan

  !

  !

  !

  voice-port 2/0

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/1

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/2

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/3

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/4

  no echo - cancel enable

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  !

  CCM-manager cisco Protocol fax

  CCM-Manager config server

  CCM-Manager config

  CCM-Manager local FastEthernet0/0.644 SCCP

  CCM-Manager sccp

  !

  !

  SCCP local FastEthernet0/0.644

  SCCP ccm version ID 1 6.0

  SCCP ccm 2 identifier version 6.0

  SCCP ccm identifier 3 version 6.0

  SCCP

  !

  SCCP ccm Group 1

  associate the ccm 1 priority 1

  associate priority 2 CCM 2

  associate the ccm 3 priority 3

  !

  transcode dspfarm profile 1

  associate the PCRS application

  !

  !

  voice pots Dial-peer 999200

  Service stcapp

  port 2/0

  !

  voice pots Dial-peer 999201

  Service stcapp

  port 2/1

  !

  voice pots Dial-peer 999202

  Service stcapp

  port 2/2

  !

  voice pots Dial-peer 999203

  Service stcapp

  2/3 port

  !

  voice pots Dial-peer 999204

  Service stcapp

  port 2/4

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  !

  NTP server

  NTP server

  end

  And a version of the show of the vg224:

  System to regain the power ROM

  System restarted at 14:30:34 CEST Wednesday 9 may 2012

  System image file is "slot0:vg224 - i6s - mz.124 - 22.T5.bin".

  Cisco VG224 processor (R527x) (revision 4.1) with 119808 K/K 11264 bytes of memory.

  Card processor ID FHK1432F2CC

  R527x CPU at 225 MHz, 40, Rev 3.1 implementation

  1 voice module 24 analog FXS edge V2.1

  2 FastEthernet interfaces

  Configuration of DRAM is 64 bits wide with disabled parity.

  63K bytes of non-volatile configuration memory.

  The system of fpga version is 250027

  The system of readonly fpga version is 250027

  Option for fpga system is 'system '.

  62496K bytes of ATA Slot0 CompactFlash (read/write)

  Configuration register is 0 x 2102

  This problem is really driving me crazy, if anyone can shed some light on what is perhaps the root cause of that I would be very grateful.

  I would say probably yes, devices compatible PCIDSS circulating on the network IP would be the way to go and that is something that we work, but currently we have units that can communicate using analog telephone lines.

  OK, PRI is clean so you must relay setup for connection of modem modem high speed work.

  I would not waste time with CSPC and go immediately to SIP or H.323.

• Eclipse and debug

  Hi all

  Sorry if this question was asked a million times. I'm new to programming Java, J2me and Blackberry... I started using the JDE 4.2.1 and decided to go the eclipse because of gaps JDE plugin (Code formatting was a biggie for me)... Eclipse on the other hand is a bear to get set up. My question has to do with the debugger and debugging.

  I put it in wrong place or debugging in Eclipse is miserable at best. From c# and Visual Studio, I'm used to throwing in the code debugger and showing you exactly where the unhandled exception or error is. With my current setup, I get a white screen in the Simulator with a vague description of the error. Can someone tell me please in the right direction... I really need more precise debugging.

  Thank you

  Paul

  If you get a white screen in the Simulator with a little message so it isn't properly in debug mode; Currently, he is running without debugging.

  If you want to debug, make sure that you select Debug or click the little bug to debug, when your in debug mode, when you get to an exception, it will show u the perspective to debug and you show the battery of the code, the exact line the error occurred, and a list of variables so that you can determine what is and is not null , check if something is a value expected (i.e. true/false etc.).

• Satellite C650D - specifications of the WiFi chip and webcam

  Hello

  does anyone have full specification 15.6 notebook hw Satellite C650D with AMD E-350 Fussion? I need to know what chip webcam and wifi chip is on the Board.

  Hey,.

  According to the specs on the site Web of Toshiba satellite C650D is equipped with network map without WIRELESS Atheros HB95 (AR5B95 chip) and 0.3 M pixel webcam.

  But why is it so important to you?

• Xcode requires additional components to support running and debugging

  Hi all

  Today, I tried to start xcode. And he asks me "xcode requires additional components to support running and debugging. Select installation to add rewuired components.

  Is this ok? Or is my system caught by some funny virus / malware? Is - this caused by the upgrade of 10.11.3 at 10.11.4, is a new version of xcode?

  I have never seen before such a message.

  Greetings from the Germany

  Chris

  Hi Chris,

  The Add ab El Capitan as Xcode keine additional components.

  Hello alles on board!

  VIELLEICHT hilft Dir das yesterday ein wenig!

  https://youtu.be/K-rbWeSL0rY

  Gruss Ralf

• I need a version 3.0 - ish of Firefox which is used on a registration site the webmaster has not upgraded and debugged the site to be compatible with Firefox 4.

  The site

  https://Fourwinds.com/OCF/login.php

  only works with Firefox as browser. The webmaster does not have upgraded and debugging for use with Firefox 4. I'm hoping to find a copy of the version 3.0 - ish to be able to access this web site. Any suggestions?

  You can get Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

  If it's just for a site, an alternative is to keep Firefox 4 but install the portable version of the earlier version of Firefox on your hard drive. You can get http://portableapps.com/apps/internet/firefox_portable - section version inherited at the bottom of this page contains links to older versions of Firefox.

• Why I get this cryptic error when I try to write and debug my Visual C++ project?

  I have some pretty serious problems related to Visual C++ and Visual Studio. Whenever I try to write and debug my project, I get the following error:

  

  Even just manually my building project of "Build > Build Solution" does not work. When I try to do, I get this error message instead:

  

  Honestly, I'm puzzled as to what could be causing this. If anyone can offer a possible solution to this question, it would be greatly appreciated.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Flight Simulator 2000 and Combat Simulator flights are loaded on my Windows 7 computer.

  My Flight Simulator 2000 and Combat Simulator flights are loaded on my Windows 7 computer.  Everything seems to work except the control stick.  There are vibrations and the throttle response, but the direction of the joystick does not work.  I just put a new hard drive and Windows 7 in my computer.
  The joystick works well in Flight Simulator 2.  Everything worked OK on Windows xp.

  Hello

  I suggest you to calibrate the joy stick and check if it works.

  1. make sure your joystick is correctly connected to the computer and turned on (if wireless).
  2. open the control panel.
  3. double click on the link of game controllers.
  4. search and unique click on your joystick in the list of controllers. If your game controller is not listed, make sure that it is properly fixed and functional.
  5. with your gamepad highlighted, click on the properties button under the list of controllers.
  6. in the new pop-up window, click the button on the settings tab.
  7. follow all the instructions in the wizard that appears and click Finish when done.
  8. you can also test all buttons and axes that your joystick offers tab Test make you all the buttons and sliders are working before relying on them in an application.

  Check this link for more information:
  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/fe074447-116D-4b51-8d90-3a24c7ed5154

  If these steps won't help, then you can contact the manufacturer for further assistance.
  It will be useful.
  Steve.

• How to convert latitude and longitude bb10 postal code?

  Hi, I want to know how to get the zip code of North latitude and longitudein BB10. I had the latitude, longitude and now I need to convert it to a zip code.

  I tried under document bb10 code

  /Reverse GeoCoding
  QStringList serviceProviders =
          QGeoServiceProvider::availableServiceProviders();
  if (serviceProviders.size()) {
      QGeoServiceProvider *serviceProvider = new QGeoServiceProvider(            serviceProviders.at(0));
      QGeoSearchManager *searchManager = serviceProvider->searchManager();
      //searchManager->setProperty("boundary", "city");    reply = searchManager->reverseGeocode(QGeoCoordinate(lat,long));
  
      bool finished_connected = QObject::connect(reply, SIGNAL(finished()),
              this, SLOT(readReverseGeocode()));
  
      bool error_connected = QObject::connect(reply,            SIGNAL(error(QGeoSearchReply::Error, QString)), this,            SLOT(reverseGeocodeError(QGeoSearchReply::Error, QString)));
  
  //Reverse GeoLocation
  void LocationHandler::readReverseGeocode() {
  QList LocDetList = reply->places();
  QGeoPlace locDe = LocDetList.at(0);qDebug() << "adr --> " << locDe.address().state();qDebug()<<"code"<deleteLater();
  }
  
  `void LocationHandler::reverseGeocodeError(QGeoSearchReply::Error error,
      QString errorString) {qDebug() << "( Geo::reverseGeocodeError ) " << errorString;reply->deleteLater();
  }
  
  I am getting below output
  
  adr "" code "" 
  
  I am not getting the values for code .What is the problem
  

  This code works for me, you can set a lower accuracy in meters (better accuracy) to ensure that you get a good Postal Code. My guess is (precision< 100)="" should="" be="">

  void Magic::positionUpdated(const QGeoPositionInfo & pos)
  {
      qDebug() << "positionUpdated()";
  
      // Get a GPS fix with an accuracy of less than 2000 meters and save the coordinates for further use
      qDebug() << pos.coordinate().latitude() << pos.coordinate().longitude();
      double accuracy = pos.attribute(QGeoPositionInfo::HorizontalAccuracy);
      qDebug() << accuracy;
      if (accuracy < 2000) {
          double lat = pos.coordinate().latitude();
          double lon = pos.coordinate().longitude();
          source->stopUpdates();
          if (!saved) {
  // This saved bool is needed because this slot gets called multiple time even after source->stopUpdates() is called. Initialize it to false in your constructor
              saved = true;
  
              // Initialize QGeoSearchManager
              QGeoSearchManager* searchManager;
              QGeoServiceProvider* serviceProvider;
              QStringList serviceProviders = QtMobilitySubset::QGeoServiceProvider::availableServiceProviders();
              if ( serviceProviders.size() ) {
                  serviceProvider = new QtMobilitySubset::QGeoServiceProvider(serviceProviders.at(0));
                  searchManager = serviceProvider->searchManager();
              }
  
              // create GeoCoordinate from latitude and longitude
              QtMobilitySubset::QGeoCoordinate myCoord =  QtMobilitySubset::QGeoCoordinate(lat, lon);
  
              // get reverseGeocode
              QGeoSearchReply* reply = searchManager->reverseGeocode(myCoord);
  
              QObject::connect(reply, SIGNAL(finished()), this, SLOT(readReverseGeocode()));
          }
      }
  }
  
  void Magic::readReverseGeocode()
  {
      qDebug() << "readReverseGeocode()";
      QGeoSearchReply* reply = qobject_cast(sender());
      // Save the city name to Settings for further use
      if (reply->error() != QGeoSearchReply::NoError)
          return;
  
      QList places = reply->places();
      if (places.length() <= 0)
          return;
      else {
          QGeoAddress address = places[0].address();
          qDebug() << "address.postcode() :" << address.postcode();
      }
      disconnect(reply, SIGNAL(finished()), this,SLOT(readReverseGeocode()));
      reply->deleteLater();
  }
  

• Chips and other special characters in the App World descriptions

  How is one makes chips and other special characters in the description of the app in the supplier portal?  I see various descriptions app with chips so I know it's possible.  I tried Googling the answer, but to no avail.  Can someone point me to the documentation for it?

  Thank you

  Lester

  I think it's just the Unicode text, so if you include these characters when you submit the form, they will display.

  Your question is perhaps more on how to insert these characters into the HTML form. To do this, because I need it rarely, I didn't copy and paste of a website where I can find the required text. For example, Google for 'unicode ball' and you can find one of them on one of the first findings of the research, such as the Wikipedia article.

  Some people probably have their systems set up to type Unicode directly from their keyboard, but I never got to determine the modern way to do this (and the last time I checked, years, Unicode in operating systems support was still largely missing).

• How to increase the red box Captivate for simulation software and the video demo?

  Hello

  Can someone let me know if there is a way to increase the size of the red zone. As you can see on the screenshot, even if I chose "align the window' the red zone is not able to cover the whole screen I want to capture. I checked the Adobe help site https://helpx.adobe.com/captivate/using/record-software-simulations.html and looks like I could pick screen or application and there area, customize the size, but I do not see these options in my Captivate. I would be really grateful to everyone who looks at this problem! Thank you!  

  

  Yes, you will need to save this as a separate file, nationally (with loss of quality, always!) this project at the same resolution as the current project. After that, you will be able to copy and paste slides recorded to the existing project. The pages that you were talking about were on a new software simulation project.

• App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

  My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

  This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

  Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

  void ApplicationUI::changeScene(const QString& newQmlFileName) {
      // Create root object for the UI
      QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
      qml->setContextProperty("_app", this);
      AbstractPane *root = qml->createRootObject();
      root->setParent(this);
  
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  My test project is also attached to this message.