Simultaneous request fails even if I set a value greater than max degrees...
HelloI get the following in a concurrent request error message...
"This request has completed with an error and produces the following execution message:
ORA-01631: extended max (600) reached in the APPLSYS table. WF_LOCAL_ROLES_STAGE ".
Then I issued the command: alter table applsys.wf_local_roles_stage storage (maxextents 650)
and gets it to sql statement...
I confirm this via the sql stmt:
Select max_extents from all_tables where table_name = 'WF_LOCAL_ROLES_STAGE '.
Subsequently, I re - submit the same application of conc... and it turns bad again the error message that I wrote above...
"This request has completed with an error and produces the following execution message:
ORA-01631: extended max (600) reached in the APPLSYS table. WF_LOCAL_ROLES_STAGE ".
When I run the command: select max_extents from all_tables where table_name = 'WF_LOCAL_ROLES_STAGE '.
the result is-> 600 (the value has been restored to the former)...
What may be the cause...?
Note: I use EBS 11.5.10, DB 10.2.0.4
Also, I tried maxextents on greater value value again to an unlimited number... and although the command gets (alter table applsys.wf_local_roles_stage (maxextents xxxx) storage) demand of the conc. fails due to max (600) met in the APPLSYS table extensions. WF_LOCAL_ROLES_STAGE.
Thank you
SIM
SIM,
Please see the following document.
Note: 397283.1 - simultaneous use synchronize Wf Local Tables errors with ORA-01631
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=397283.1
Kind regards
Hussein
Tags: Oracle Applications
Similar Questions
-
How to set the simultaneous request completed with warning?
Hi all:
How to set the simultaneous request completed with warning in oracle 11.5.9?
For example:
I completed an application with "Completed" 'Normal '.
After I put a condition similar to when xxx > 0 then
It will complete a request indicates 'Complete' 'warning '.
My environment is: oracle 11.5.9 and operating system is Linux Redhat 4.0
Concerning
TerryTerry,
You can use 'FND_CONCURRENT. Function SET_COMPLETION_STATUS.
Note: 866194.1 - is there a method to return a 'Warning' to host Language simultaneous program status?
The Oracle Applications Developer's Guide
http://download-West.Oracle.com/docs/CD/B11454_01/11.5.9/Acrobat/115devg.PDFFND_CONCURRENT. SET_COMPLETION_STATUS
http://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT.SET_COMPLETION_STATUS&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001Thank you
Hussein -
Fault of simultaneous requests
I have several simultaneous requests that fail. This was after an upgrade from 11.5.9 11.5.10.2 errors are listed as follows:
Synchronize the LOCAL of WF tables
Error: "ORA-20100: creation of o0070508.tmp for FND_FILE file failed."
You can find more information on the cause of the error in the log requests. »
Debug purge and alerts of the system log
: "Error ORACLE 20100 in FDPSTP
Cause: FDPSTP failed due to the ORA-20100: creation of o0070490.tmp for FND_FILE file failed.
You can find more information on the cause of the error in the log requests.
ORA-06512: at the 'APPS '. FND_FILE', line 410
ORA-06512"
Synchronize tables LOCAL of Workflow (defined report)
Error: "the whole completed normally with result error.
The result was determined by the final stage, HZ_GROUP. »
Files of newspapers who am I looking for. The .req files are in them the same news and journal of SID_0218.mgr had this error
The TNS alias could not be located, the listening on APPSERVER154 process could not be contacted or the listener cannot generate the process from the Service Manager.
But when I try to start the listener apps it says it is already running.
Thank youHello
Please, check the following:
(1) make sure that APPLPTMP is set to a valid directory------(verification of the operating system by issuing "echo $APPLPTMP" as user applmgr)
(2) ensure that user applmgr and the 'oracle' database user have permissions to read/write on $APPLPTMP
(3) make sure that APPLPTMP is the first entry of utl_file_dir (utl_file_dir is located in the
init .ora file). Note: 261693.1 - ORA-20100 on simultaneous treatment of troubleshooting
Kind regards
Hussein -
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
-
I have a need to call a web service from an APEX application, so I thought I'd try to experience everything first call a web service that is accessible to the public from W3Schools. The URL of the WSDL that I use is:
http://www.w3schools.com/webservices/TempConvert.asmx?WSDL
The 1st thing I try in APEX is to create a Web Service based on the above URL reference. Problem is that I get the following error:
ORA-29273: HTTP request failed ORA-12535: TNS:operation expired
Any ideas?
I even tried with some other URL WSDL and always the same exact error.
Thanks in advance.
Hello
Maybe your database server have firewall that blocks to internet connection?
Kind regards
Jari -
Do "request failed: ' error after the workflow run 'assign a state change.
I try to start a workflow that sends an email once a machine is put into operation. A simple task, I think.
I have installation vRA and vRO and am able to supply machines form vRA before making further changes.
In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines. After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "
The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.
Any comments would be greatly appreciated!
The issue was that endpoint vRO was not added to the vRA. After you add endpoint and the taking of the inventory, the problem has been resolved.
-
PIXMA MX340 Windows 10 device descriptor request failed Code 43
Hello. I recently bought a new computer to office 810 - QE HP Envy Phoenix yesterday.
The first thing I did was to finish the free update on a clean slate ("save anything") of Windows for Windows Professional 10, 64-bit edition 8.1.
The specifications of the system are:
32 GB RAM DDR3
3 TB hard drive 7 200 RPM SATA
Integrated Realtek / Beats Audio
Processor Intel Core i7-4790 3.6 GHz 4 heartsNVIDIA GeForce GTX 745 4 GB DDR3 video card
My Canon Pixma MX 340 multifunction printer is not able to be recognized by this new system. I installed the software and drivers for the printer, however, Device Manager keeps telling me that this printer is a "unknown USB device: device descriptor request failed, code 43" I also tried to download the latest drivers directly from Canon specifically list of compatibility with Windows 10, which did not help me at all because the drivers are not able to find the printer during the installation.
I had originally this printer connected to one of the USB ports 3.0 at the back of the system, but I have also tried using this printer with the USB 2.0 ports, as my old system had USB 2.0. No change, it still gives the same exact error. I also tried this printer connected directly to the USB 3.0 and USB 2.0 ports on my computer without effect before.
I checked to see if this printer is "compatible" with 10 windows, and according to the compatibility of Microsoft website, it says that the Pixma MX340 should compatible.
Advice, tips or suggestions would be very appreciated. Thank you.
I FOUND THE PROBLEM.
I forgot that not only I used an extension USB cable, but I was also with a long USB cable and the USB extension as well. This long USB cable was the culprit!
I just noticed this and decided to test it. With the long USB cable, I get the error. But when going back to a standard length cable, the printer was correctly as a Canon MX340!
If I switch back to the long cable, it will be impossible to find.
However, I can still use the USB extension cable. This cable does not cause a conflict any!
-
C1765nfw always guess I make copies of legal size, even if I set the size of the copy as a 'Letter' in the default copy settings. Paper default tray is also 'Letter' and 8.5 x 11 paper I get incompatibility of paper for each page, because the C1765 is looking for legal size paper. and then have to erase/reset for each page I copy (including multi-page documents) how to fix this?
I just fixed that for a client, and it was pretty simple. Somehow its default settings for the MPF tray have been changed to legal. Try going to settings of the tray then MPF and change the default to the letter. This corrected it in my case.
-
Request failed, click ok to finish.
When I turn on my computer as soon as it boots up to windows it gives me an error message that says: " request failed, click ok to terminate".» After that my computer shuts down. I don't remember the code there.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Build request failed with the message: error: ENOENT, untie
I use emulator ripple to package the application for Blackberry os 7...
But when I press the button package it gives me error as follows:Oh, Snap! Build request failed with the message: error: ENOENT, remove the link "C:\Documents and Settings\AtikJ\RippleSites\AgriQuote\packaged\AgriQuoteApp.zip".
Duplicate of:
http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-while-packaging-the-app-us... -
Error = the Code signing request failed
I'm trying to sign my application of webbworks for the playbook, but I cannot, here is the process of me, packaging and then try to sign. I can install non signed bar file fine but I can't seem to sign.
"/ Users/mike/projects/blackberry playbook sdk/bbwp/bbwp" $build_folder "/ build.zip" ""
[INFO] Parsing of the command line options
[INFO] Bbwp.properties analysis
[INFO] Validation of archive WebWorks
[INFO] The analysis of config.xml
[WARNING] Cannot find an element of
[INFO] The application of filling source
[INFO] Compiling applications WebWorks
[INFO] Packaging of the record bar
[INFO] Bar complete packaging
[INFO] Packaging applications complete WebWorks
"/ Users/mike/projects/blackberry playbook sdk/bbwp/blackberry-tablets-sdk/bin/blackberry-sign"-verbose - cskpass pass - keystore "/ users/mike/projects/blackberry playbook sdk/bbwp/bin/sigtool.p12"-storepass pass "$build_folder"/bin/build.bar RDK.
TBS = developer certificate
30 81 a0 c5 03 02 01 02 02 04 4 a3 82 99 30 0c d
> barsigner error: Server error: Code signing request failed because this file was previously signed.
This can be caused by trying to sign the same version of the application. Try incrementing the value of the version property in your config.xml file (or use the command line parameter - buildId) and sign again.
-
Signature request failed for key RRT and CPR
Hello world
I received 3 csi lines of RIM to sign my application. I recorded these 3 keys without problem.
When I try to sign my application, I correctly get signature only for applications RBB. RRT and CPR requests fail: "the signature on the code signing application did not check. The probable cause of this problem is entered a wrong password CSK. »
I checked the passwords. The same goes for these 3 files.
I use JDE 4.2.1.
What could be the pb?
Thanks in advance.
It is a problem of password. I recommend removing your keys and start over with a new series. You can request new keys (for free) here: https://www.blackberry.com/SignedKeys/
-
Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."
I need your help pls.
Hello!
Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.
-
Error of the ripple: Oh Snap! Build request failed with the message: CreateProcessW
Hello
I installed the Mobile Emulator 0.9.1 ripple with SDK for Tablet 2.2.0.5 WebWorks, following the instructions exacly on a Windows 7 64-bit machine.
If I try to package virtually any application (HelloWorld, weather, examples, something more complex, whatever), I get the following error:
Oh Snap! Build request failed with message: CreateProcessW: The system cannot find the file specified.
I tried a lot of things. I'm guessing that it's a mistake with the SDK, since I can enter any path to any folder that exists on my HD as the path to the SDK and I get the same error.
Path SDK: SDK for Tablet 2.2.0.5 WebWorks c:\RIM\BlackBerry
The project root: c:\Users\Username\RippleSites\AppName
Archive name: AppName
Output folder: c:\
I tried different paths for the foregoing, moving my code and by reinstalling the SDK.
I'm at my wits end - about to renounce WebWorks. Any ideas?
It seems %SystemRoot%/system32 and any % were missing from my path variable. All good - too bad!
Land
-
Build request failed with the message: helloWorld/Dokumente / is not a valid path
Hello
Unfortunately ripple does not work under Windows 7, so I tried on Mac. On Mac, I have the following parameters in the ripple:
SDK path: / Developer/SDKs/Research in Motion/BlackBerry WebWorks SDK 2.3.1.5
The project root: / Dokumente/helloWorld
Archive name: helloWorld
Output folder: / Dokumente/BlackBerryOutputThere is the file config.xml and index.html file in the helloWorld file
I have for this site:
When I try to pack in ripple, I get:
Build request failed with the message: helloWorld/Dokumente / is not a valid pathThere is a message ' no simulators found "on the bottom of the settings, too." '
I tried different paths, one of my localhost in Apache, but nothing works. What's wrong??
Well, the path was not "consistent". I hate the f... Mac: / Users/Valentina/Documents/helloWorld to the project root and/Users/Valentina/Documents/BlackBerryOutput was necessary.
Just in case somebody stumbles on the same problem.
Maybe you are looking for
-
21:9 (2560 x 1080) ultra wide screen Macbook Air does not work after macOS Sierra
I have a problem with my LG 29UM58.-p. After the installation of macOS Sierra Switchresx (4.5.3) isn't my custom resolution 2560 x 1080 more. I already tried to uninstall Switchresx and took new custom resolutions, but it did not help... First of all
-
compatibility descendant tx2z - no?
I just bought a tx2z-1020us. It works very well for office 2003 and autour Microsoft software from the same time, but nothing else. Software compatibility tells me just what I'm trying to run is not compatible. It does not accept any changes that
-
Why is there a red dot on the notifications in my preferences system on my iMac?
Why is there a red dot on the notifications in my preferences system on my iMac?
-
Hello, I am trying to get the DDK AI working for a PXI-6225 card examples and still receive an output value of 10.599597. I HAVE 0 (68 pins) short-circuited for AI 8 (34 pin) that should lead to a value of 0.0 VDC. I also tried to connect a battery o
-
a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory
When looking at the module a LabVIEW VI called for TestStand, I get the following message: A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory. Please reinstall or repair. I made the mistake of cleaning C: in my compute