sin catalogo ntbackup backup recover

Similar Questions

• DataGuard: MRP still in WAIT_FOR_GAP after incremental backup recover

  Hello

  I'm new to the dataguard configuration, and recently, I connected on a dataguard configuration to test the object.

  I have deleted stupidely some archive my primary database logs, thereby breaking the standby update (due to the fact that the database has not been started for a long time, the gap is now about 130 days ).

  I have to try to recover the situation re-synchronized the RCS of the day before using an incremental backup (and create eve of primary control files).

  After restoration, the SNA were the same, but restarting the recovery service (MRP), it is still indicating WAIT_FOR_GAP and still waiting for my missing archive logs.

  New archive logs is well shipped to the waiting however.

  No idea what I missed or what should I do?

  The database version is a 12.1.0.1.

  DGMGRL > see Configuring

  Configuration - g12dggo

  Protection mode: MaxPerformance

  Databases:

  g12dggop - primary database

  Error: ORA-16724: could not resolve the deficit for one or more databases in waiting

  g12dggos - physical of the standby database

  Fast-Start Failover: DISABLED

  The configuration status:

  ERROR

  DGMGRL > validate database g12dggop

  Database role: primary database

  Ready for the digital switchover: Yes

  Flashback Database Status:

  g12dggop: Off

  DGMGRL > validate database g12dggos

  Role of data: physical database ensures

  Primary data: g12dggop

  Ready for the digital switchover: No.

  Ready for failover: Yes (main stream)

  Flashback Database Status:

  g12dggop: Off

  g12dggos: Off

  Apply information in standby mode:

  Apply a State: running

  Apply the Lag: 143 days 14 hours 18 minutes 26 seconds

  Apply the delay: 0 minutes

  Database backup:

  SQL > select process, sequence #, status from v$ managed_standby;

  STATUS OF PROCESS SEQUENCE #.

  --------- ---------- ------------

  ARCH CONNECTED 0

  ARCH CONNECTED 0

  RFS 0 IDLE

  MRP0 1965 WAIT_FOR_GAP

  RFS 3526 IDLE

  More small sequence of table v$ archived_log is corresponding to the last recovery made.

  SQL > select sequence #, applied to the order of v$ archived_log by sequence #.

  SEQUENCE # APPLIED

  ---------- ---------

  3441 NO.

  SQL > select * from v$ archived_log where sequence #= 3441; Select * from v$ archived_log where sequence #= 3441;

  RECID STAMP

  ---------- ----------

  NAME

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  DEST_ID THREAD # SEQUENCE # RESETLOGS_CHANGE # RESETLOGS_TIME RESETLOGS_ID FIRST_CHANGE # FIRST_TIME NEXT_CHANGE # NEXT_TIME BLOCKS BLOCK_SIZE CREATOR

  ---------- ---------- ---------- ----------------- ------------------- ------------ ------------- ------------------- ------------ ------------------- ---------- ---------- -------

  REGISTR STA ARC APPLIED S DEL COMPLETION_TIME DIC DIC END BACKUP_COUNT ARCHIVAL_THREAD # ACTIVATION # IS_ COM FAL END_OF_RED BIN CON_ID

  ------- --- --- --------- --- - ------------------- --- --- --- ------------ ---------------- ----------- --- --- --- ---------- --- ----------

  1 880046905

  /oravar/G12DGGO/Archiv/1_3441_865786197.dbf

  2 1 1 08/12/3441 2014 16:09:57 865786197 7004011 18/05/2015 17:21:17 7005043 18/05/2015 17:29:22 509 512 ARCH

  RFS NO NO YES NO A 17:28:25 05/18/2015 NO NO NO 0 1 2523036437 NO NO NO YES 0

  Thank you in advance for your help!

  Problem solved.

  In Oracle 12 c, roll forward is more to do "by hand".

  There are a few commands to RMAN done automatically, by using the primary database service (G12DGGOP_DG for me).

  So back up mode:

  RESTORE DATABASE SERVICE G12DGGOP_DG WITH THE HELP OF NOREDO COMPRESSED BACKUPSET SECTION SIZE 100M;

  Then after restore controlfile in nomount (stop):

  RESTORE CONTROLFILE EVE OF SERVICE G12DGGOP_DG;

  The information comes from here:

  http://allthingsoracle.com/rolling-forward-a-physical-standby-database-using-the-recover-command/

  Reference on Oracle documentation:

  https://docs.Oracle.com/database/121/BRADV/rcmadvre.htm#BRADV685

  Thank you all for the answers and the help on this!

  Ray Zin

• Encrypt backups

  Hi, I have two oracle RAC on 10 gr 2 (a RAC is self and the other is EE).
  
  I have 2 type of backup for everyone every night.
  
  (1) for all my schemas expdp (can encrypt my entire backups, each file, with oracle 10 g?)
  (2) rman with image copy (see the script for my backups). They are in the copy of the image
  
  I need to encrypt all my backups (expdp and rman).
  
  How can I do?
  
  My Rman script is the following:

  RUN {
  allocate channel oem_backup_disk1 type disk ;
  
  SET MAXCORRUPT FOR DATAFILE 6 TO 10;
  
  RECOVER COPY OF DATABASE WITH TAG 'incr_update' UNTIL TIME 'SYSDATE - 7';
  BACKUP INCREMENTAL LEVEL 1 cumulative copies=1 FOR RECOVER OF COPY WITH TAG 'incr_update' DATABASE;
  backup as copy archivelog all not backed up delete all input;
  release channel oem_backup_disk1;
  }
  
  # Hacemos un crosscheck de las copias de seguridad, para comparar lo que tenemos en disco con lo del catalogo
  CROSSCHECK BACKUP;
  
  # Eliminamos los backups antiguos
  DELETE NOPROMPT EXPIRED BACKUP;
  DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
  
  CROSSCHECK COPY;
  DELETE NOPROMPT EXPIRED COPY;
  DELETE NOPROMPT OBSOLETE;
  
  #Hacemos lo mismo para los archivelog (realmente lo deberia de haber hecho antes, pero asi nos aseguramos)
  CROSSCHECK ARCHIVELOG ALL;
  DELETE NOPROMPT EXPIRED ARCHIVELOG ALL;
  
  
  
  # End of RMAN command script;

  (1) imdp: no it is only possible to encrypt some columns that are already defined as columns encrypted in the DB. You can encrypt the dump file with a third-party tool of the party.

  (2) RMAN: Copy switch sets of backup instead of the image, and then you will be able to use the features of RMAN encryption.

• previous versions of files available for recovery "windows server backup.

  I use "windows server backup" to back up my Windows Server 2008R2 and R2 for Windows Server 2012 boxes.

  Using the graphical user interface of 'windows split backup', I can:

  o search the various backups on disk

  o down through the tree of a given instance of a backup to disk

  o select a single file to retrieve

  I want to watch all instances of a file that do not exist to recover.  This feature is available in 'windows explorer' by the 'previous versions' tab.  How can I get this same 'previous versions' ability via the 'windows server backup"collect mistletoe?

  Are there other utilities (other that the 'windows server backup"recover gui) that allow me to browse the catalog of backup?

  Is it possible to browse the catalogue using the powershell cmdlets?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Backup Wizard stops at 5 GB

  I am trying to use the XP Backup Wizard backs up to a 32 GB external drive.  About 5 GB, the backup shutdown and a message informs you that the 'band' is full.  What I am doing wrong?

  Its a FAT32 healthy.

  There you go: the maximum size of a file in a FAT32 drive is 4 GB less 1 byte.

  Reformat the Flash DRIVE to NTFS (see--> http://lifehacker.com/5195783/format-a-usb-drive-as-ntfs-in-windows-xp)

  Apparently, you must set the strategy of "optimizing performance" so that the format utility offer NTFS option.  Once the disk is formatted, however, you can (and should) put it to "optimize for quick removal".

  If it were me, I wouldn't count on a flash drive to my backup (even though they were better; see--> http://genealogysstar.blogspot.com/2011/01/update-on-reliability-of-flashdrives.html).  For an interesting analysis of the long-term using flash drives backup, see http://ask.metafilter.com/182334/How-long-does-Flash-Data-last-if-drive-is-only-used-once

  Also, I would not use NTBackup (backup utility built-in to Windows XP), but would use a disk cloning/imaging application.

• Filed on a backup DVD

  I have Windows XP.  How to make a manual backup on a DVD?  Because I don't have MS One Care, I can't figure out how to back up my files.

  The default that NTBackup backup on floppy disk, it can not save on dvd

  The backup to a location of hd, then upgrade again fire on a backup dvd, or use a dedicated backup application which most can save at various locations.

• iTunes now pointing to music files not completely different!

  Hello

  I just migrated my iTunes library on a NAS (sinology DS216-J).

  It worked fine for a few days but now when I try to play a track he plays at all and when I go to view in the Finder it points to a photo file even if the music file is safely on the NAS.

  Any help would be greatly appreciated!

  Thank you

  JO

  I knew from your subject without even opening the thread that has a NAS would be involved in this.  This type of post is usually a SIN in it somewhere.  iTunes and NAS do not work well together. There is not really a solution. For some it works for a while, or even a long time, for others this kind of thing happens. Without rhyme or reason. You are better to use the SIN as a backup drive and keep the iTunes library on a normal external hard drive.

• How to restore my tabs?

  I had more than 100 pills months then now I used the prog called gum track after I launched my firefox as usuall find only 1 page!

  they definitely got deleted?

  You need an old copy of sessionstore.js file backup recover these tabs lost.

  You can try to restore a previous version of the sessionstore.js file.

  • Right click: properties > Previous Versions
  • http://Windows.Microsoft.com/en-us/Windows7/previous-versions-of-files-frequently-asked-questions

• I have a 2009 17 "MB pro 512 GB HD, it begins to run slowly. Is there a reliable program that can wipe the hard drive.

  I have a MB pro 17: with a hard drive, 512, he starts to run a bit slow. All the updates are installed. Is there a reliable program that will wipe the drive. «also it is an advantage to have a replacement disk SSD.»

  Performance issues, too full hard drive, lack of system resources, too old

  are obsolete applications, old parts of system of earlier versions (or is no longer valid)

  all the reasons to be aware of what to do.

  If the hard drive is too full of content, you will need to choose what to keep and what to

  Remove; an archive external and another drive for backup (recover or restore) are

  a few things to invest in and learn how to use Time Machine, OS X Recovery, and

  maybe learn to make, test and use full Clones of the OS X system.

  • Guides to tech - Malware, Adware, Performance - thesafemac

  http://www.thesafemac.com/tech-guides/

  You may obtain and use report generators software that is non-invasive, to see a

  General overview of where system resources are allocated; Etrecheck...

  http://etrecheck.com/#about

  Avoid 'cleanmymac' or 'mackeeper" and other items that are made to rip you off.

  There are a few software uninstaller that can help eliminate some software,

  those who are usually free like AppCleaner, among others that can be used

  with caution. There are a lot of unknown content in a non - casual

  technical users, who must be in the Mac OS X for the computer to operate.

  • Applications can affect the performance of Mac, battery, temperature and fan activity - Apple Support

  How to completely remove applications to OS X with AppCleaner (and maybe mess to the top of your Mac)

  http://osxdaily.com/2012/02/15/delete-applications-Mac-OS-x-AppCleaner/

  Some of the things there can be dangerous; If tread with caution...

• This is what exactly gets moved with directory change & organize?

  Hi all

  Quick question because I am about to install my SIN:

  I decided to put my iTunes Media on my NAS drive folder, but I will keep everything (files to iTunes library, Album art files, etc) on my local computer.

  My question is: when I go into my iTunes library, change the directory to my iTunes Media folder to the NAS and then run library organize to group all my files to the iTunes media new media folder location - which is EXACTLY moved?

  -ONLY media files don't get flies over? (this is what would be ideal)

  N ' iTunes also try to move the "Album" folder to their new location as well? Or he keeps it where it is?

  -ITunes also trying to move the iTunes different files in library in the new location? Or leave it where it is?

  -ITunes set anything else in the new directory, outside only in the media?

  I just want to be sure that I do not send anything I don't want to move, and later have an annoying problem (ie. have iTunes move my folder of work album to NAS, and constantly struggle to try to move on the NAS just to have iTunes continue to make a new one again and again and again) or at least If something else to move, I can see if its okay for me to put the SIN and I can deal with it somehow.

  Your help would be greatly appreciated!

  Thank you!

  It will copy only media.

  I suggest that you spend a pleasant hour or two go back and read all the topics where people have had erratic problems using iTunes with a NAS. They do not play well together.  Better be putting the entire library SIN so iTunes is less dependent on the NAS for names of correct path for your files because it will all be together instead of the distance. Better would be to use a standard hard drive and use the SIN as a backup.

• How to ReadyCloud read-only

  So, ReadyCloud is very convenient, especially for me to perform remote maintenance, but there is no reason to make it possible to delete files on our NAS server remotely. Rather, I'm terrified that someone anywhere in the world has only to work on a single password for all delete and destroy our business.

  I am convinced that the admin aspect is protected behind a second password, stored only on the devices themselves (although Wordpress has taught me that to be able to change the username admin certainly would not hurt), but I do not how to change the account of ReadyCloud on a 'read only' share, because the area is grayed out. Is there a way to get around this?

  Thank you

  Ok. Not quite what I was after as it seems to only affect only invited users, rather than the main account of ReadyCloud, which administers these permissions. Yet, I found that putting the SIN of offline backup and administer via a remote connection to a computer on the LAN are acceptable workaround.

• OS WIN7 HOME PREM - PRE INSTALLED SHOULD DOWNLOAD LINK

  Dear Sir.

  I bought Acer 5755 g 3 years back, between the time I formatted my original OS win7 Home Perm & installed Win7 profess, I want to return to my original OS win7 Home Prem in order to update to win10, so I ask you send me the link to download the Original Win7 Home Prem with Setup Guide, as I deleted the backup recover the original Home win7 Prem. So please help.

  Note that if I download online in Microsoft Site its showing me the details below:

  Error

  The product key you have entered seems to be for software pre-installed by the manufacturer of the device. Contact the manufacturer of the device for soft recovery options.

  Kind regards

  Hello

  It is not a download link for your OEM license.

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys of proceeds of sale retail not OEM preinstalled (Acer, Dell, HP, etc.), product keys that you already discovered by that you have received the message.

  As you have a preinstalled OEM license (Acer), contact the manufacturer of your computer to order recovery media that they must provide for a fee, if they yet; with Acer is very doubtful...

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  The COA sticker with the product key is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  Why you do not upgrade Windows 7 Professional at 10 instead of reinstalling Windows 7 Home Premium and upgrade that?

  See you soon.

• BlackBerry smartphones can not move contacts from 9000 to 9800

  My old BB 9000, or more likely, DM 6.0 organize my contacts on my old phone hostage!

  I had my 9800 yesterday and tried to run the Wizard "device." Everything looks good, no errors, everything works... then I have open Contacts and it is empty. Look at my old camera, everything is still there. Try the synchronization again and again, no luck. Trying to back up "All contacts" on 9000 then just that give back to 9800, does not work.

  I think the problem is that on the 9000, I see three "lists of contacts" - two named Desktop and the other with my gmail address. It appears in fact as those associated with the gmail address move okay - except that only one contact is associated with this account! The rest seems to be distributed randomly among the other two inputs of funds.

  I have tried everything I can think to manually backup/recover contacts from the old phone, but no matter how I try to sync, I don't the addresses associated with the gmail account or when I restore what seems to be a 'complete' backup all contacts disappear.

  A side note, I didn't want/need to keep these contacts separate so if there is a way to merge together to solve as magically I will gladly do - unfortunately entered KB talking about this all reference ridiculously old versions of the software, so I don't know how to do with DM6 and the 9800.

  It's ridiculously frustrating. Permutation of devices was such a breeze and a grand more for me in the past, who would have thought that RIM would make it more difficult/worse?

  Let me know if I can give you more info!

  Well, 3 days it took me to solve this problem, quite poor of general RIM experience - I hope that someone is watching. Here is the solution I found, based on the process here: http://www.berryreview.com/2010/06/03/faq-duplicate-desktop-or-unknown-contact-list-databases-found-...

  Original problem - several book entries of "Desktop" addresses on my old phone, which apparently caused problems when you use the DM6 ' device' Wizard.

  Resolution:

  (1) of peripheral origin, take a backup and select only contacts 'Address Book - All.

  (2) Download ABC Amber Blackberry Editor (why I need a 3rd party tool to use my new phone!) as mentioned in the article.

  (3) open the .ipd file that contains the address book - all entries, do a save as and put them in a new file - they are now simply part of the primary address book.

  (4) this is where I spread article above - still, restore that backup on my new phone doesn't work but restore on my OLD phone actually. If that's what I did.

  (5) I reactivated my old phone on BES then used wireless sync to synchronize the address book to the server.

  (6) to the new phone, activate on BES and turn on the wireless sync, and voila, I have my address on my new phone... FINALLY.

  The obvious answer here is ' well, if you had the wireless sync works properly in the first place that probably would have been avoided "which is quite true. However, as it is a personal device that I use to work for e-mail only, the camera itself has always been the source of my address information and it sync to my business account has been low on my priority list. I thought that saw DM configured to make weekly backups (which still occur whenever I plug in my phone, regardless of whether or not - a week spent yet another problem with shit DM6) would be sufficient coverage of the information available to me.

  I hope someone finds this useful info and should not suffer through 3 days of hair pulling as I did.

• Windows HP probook 4520 s 7

  HP probook 4520 s windows 7 backup recover is remove it please send me backup

  This widget could not be displayed.

• Elements 14 says I'm low disk space when I'm not

  Recently installed 14 items on a new computer.  I imported a bunch of photos and when I try to change the Organizer using anything other than agricultural or the removal of red eye, I get a message that I can't because I'm low disk space.  My computer is not low disk space; This is a new computer.  So far I have not problems no Editor editing.  I have items on my C: drive and pictures are on a mapped network drive. Previously, I had 11 items and never had a problem with the photos on a network drive.

  I saw that there is an unresolved on the matter in December.  Any solution?

  EmeraldCity14 wrote:

  Thanks - I just read that all discussion and it appears the answer is that with the upgrade to 14, you cannot store pictures on the NAS and have correctly work items. Do you know if you can store on AWS or something similar? I saw a reference to be stored on the cloud in this discussion.

  A removable disk does not work so I need to have more than one user to access pictures.

  Share photos AND catalogs (even having licenses for each user) has never been the purpose of the elements. The nearest way is limited to share a library as well as the catalogue on an external drive, by pluggin JEP alternately to each computer. It is common, when you use a desktop computer and a laptop computer at different times.

  Share photos only on the NAS for all users may be obtained using the SIN as a backup copy with software like Synctoy. If other users need not really the Organizer, but he can live with a traditional and hierarchical folder hierarchy, it will work.