Since the feeder fax fails but OK to flat bed. 5610 HP all-in-one

Similar Questions

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• The transaction has failed, but the MONEY has been collected.

  I buy the standard on adobe cs6 online.

  the transaction has failed, but the money was successfully transfer.

  Can any who advised what to do and who should I contact with?

  Thank you.

  Contact adobe - http://helpx.adobe.com/x-productkb/global/service-b.html

• Cultivate the hard drive for the virtual machine fails but customer VI indicates successful operation

  I tried to cultivate a 1 TB drive of 100 GB on a block size of 8 MB LUN with still 117 GB of free space. I thought that 17 GB of free space would be sufficient.

  I had a successful operation task in VI Client after resizing this vmdk to 100 GB, BUT no real changes.

  I tried adding 50 GB (117 GB of free) and the same result.

  Only when I tried to increase 20 GB, then it worked fine.

  QUESTION:

  What is the percentage of disk space must be available on the LUN to cultivate a vmdk to 1 TB? It is a percentage of the vmdk file?

  Why the VI Client would be a successful operation, but no change?

  Your help is most appreciated.

  Thank you

  Bottom line first: you won't be able to easily overcome.

  The reason is the large block size.  If you choose blocks of 8 MB, that's fine, but the trade-off is that even if a sub-block is used, the entire block is considered as unavailable for growth.  So, you have the space wasted in many of your blocks of 8MB.  It is considered as free, then you think you have enough space to grow, but in reality, there is very little, if any, blocks that are completely empty.   Unfortunately, there is no easy way to "squeeze" the blocks and/or move the white space in the 'clean' for growth blocks.

  A lot of people think 8 MB is the way to go and use it all the time.  Not the case.  As with most things, there is a trade-off space-time.  Personally, I use 1 MB of size; It is a good choice of 'medium', memory load balancing and free space.

  For myself, I don't have if worry VMFS, increasingly because if my store of data starts to be complete, I just grow on the fly with my Xiotech.  Can't use VI at all.

• I got the latest update of Firefox today, and since the restart, I can't read my emails from Hotmail or connect to one of my banking sites secure... Why?

  It restarted my pc automatically updated Mozilla and now after the update, as always, but now I can no longer read my mail, my banking or access secure sites... I can open their pages, but take no action. It always works with Solution Explorer, is not all the defects of the banks.

  Already did and it does not yet solve anything. Instead, I went to the add - we found that in the update of FF, 6 add on that I had not been able to unsubscribe from there. As soon as I DELETED all those - the pages are working again!

• Erk - 321 has keyboard: HP Envy wireless keyboard only works after a reboot, but not at initial startup. Envy all in one office.

  Hello, for some reason, my keyboard is not working whenever I'm doing a restart. Or turn on for the first time after a stop down. The only keys that work are the volume keys.
  
  But if I restart by connection or desktop screen, the keyboard works fine.
  
  The batteries are not dead, I replaced the.
  
  Any info would be great. Thank you.

  I have HP Envy Beats all-in-one.  Mouse worked, keyboard no longer works unless after withdrawal of the driver for keyboard then rebooted.  Would work for this next boot, solved by disabling fast-start-up in power options, the theory is computer starts jumped linking or simply crossed it faster that the keyboard can answer.  Hope this helps you.

• Failed to get printer hp psc 2410 photosmart all-in-one to print in color

  I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

  I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

  I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

  Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

  Close the pritnter and computer, did it again, same results.

  Uninstalled and installed printer and software, same result.

  What could have happened?  Behaves as if it doesn't have a color cartridge.

  Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

• Deployment of the IOM has failed but OIM_Server1 works fine

  Hello
  When I start the server admin it shows oim_server running. But when I click on it and see the deployment, it does evidence application IOM (11.1.1.3.0) failed. I try check it out but not succeeded. I check my db connection is fine. I reinstall but once again even.
  The error light is when I run the console of the IOM on (localhost:14000 / IOM) it gives me error 404 not found.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  any help would be appreciated.please

  Hello

  Open the weblogic administration console, go to server and click on IOM server and then click deployments and see the State of all things confirm in return.

  Kind regards
  kK

• Since the last update failed to read my videos

  When I go to play my videos pro will just will not load or my photos have one in the lower right corner?

  Have you tried to contact the Go Pro camera developers on this issue on their website?

• Since the upgrade, 20 of Firefox and Adobe flash player 11 devour all my CPU during video streaming playback

  Win7 64 bit
  Firefox20
  Adobe Flash Player 11 plugin

  When streaming, information on the Task Manager:

  Flashplayerplugin__11__7__700__169.exe * 32 - use 50% CPU or more

  plugin - container.exe * 32 - consumes 40% of CPU or more

  Using 100% CPU translates the choppy video. I don't think that this heavy use of the CPU was not the case until I upgraded from Firefox13 and Adobe Flash Player 11. I tried without decommissioning, but this does not seem to make a difference.

  Thanks for any help.

  
  

• I used LR for several years. I had to re - install on a new computer. I imported a few photos from a card. They show in the library module. But when I click on to edit all I get is a blue screen. No pictures. What is going on?

  See above.

  Hi sarad23222369,

  • Go to Lightroom > Preferences.
  • Go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

  Kind regards

  Tanuj

• When scanning, the ADP does not work on my HP Deskjet 3510 e-all-in-one printer

  Ok.  This is my second time to enter in this.  I have an ADF and have tried SEVERAL times to scan but my scanner WILL NOT use the ADF.  I chkd information available on this forum but nothing I've tried has worked.  It is "operator error" or "hardware error"?  I tried to use this feature because I bought the printer and it never worked. Finally decided I had to see it through and try to get help.  But I worked on it for 4 hours and feel like a "hostage" - the frustration isn't quite describe how I feel now.  I get in a panick because I needed to scan 10 pps two hours ago and here I am STILL sitting trying to get this d * thing #$ % to work.  Help, please!

  THX Sylvie

  Hello

  Are you sure that the 3510 has an ADF? I can't see it ANYWHERE:

  

  The one on the top of the page here the input tray, ADF No.

  Kind regards.

• How do the "black cartridge grayscale ink only" by default for my C7280 all-in-one

  I have Windows 7 64 bit.  I made the change in devices and printers under Advanced, default print, this option, but when I try to print and look at the properties by default is on the color.

  To print the black ink only follow the steps below.

  1. Select Start menu
  
  2. go into devices and printers.
  
  3. right click on the printer, select printing preferences
  
  4. in the lower right corner, select Advanced
  
  5. and then under features of the printer select print grayscale a dropdown list will appear to black ink only.
  
  
  
  Let me know how it goes.

• Can copy and scan but not print with my hp deskjet all-in-one 1515

  Hello

  Pls help! I can't print. I can scan and photocopy with my hp deskjet printer 1515 all-in-in-one, but I can't print. I tried to print with my computer laptop windows 7 and was able to print but I can't print using my regular laptop, which is a laptop HP 650 which uses windows 8.1. When I send a document to print is says it is printing and shows in the print queue and then disappears. What can I do? He has not even print a test page but it printed a page of information and the alignment of catrige page.

  Hello

  Please, try the following steps and let me know if that can help you:

  1. In the Control Panel, select uninstall a program and uninstall the driver software base HP Deskjet Ink Advantage publicly traded 1515.
  2. Click the R keys on your keyboard and the Windows Logo appears in the Run dialog box.
  3. Spool type and click OK.
  4. Open the Drivers folder, and then select the x 64 folder if you have a 64-bit OS or the w32x86 if you have a 32 bit OS
     Note: visit http://whatsmyos.com/ to find your type of operating system if necessary.
  5. Open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6. Reinstall the latest version of the HP software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-117537-4&cc=us&DLC=en&LC=en&OS=4158&product=5385208&sw_lang=

  Shlomi

• Since last week, I have a PDF to WORD conversion problem.  All the documents, I have try to convert room conversion failed.  What is going on?  Thanks in advance and I look forward to hear from you.

  Nice day
  
  Since the last week I'm trouble conversion PDF to WORD.
  
  All documents I try to convert room conversion failure.
  
  What happens?
  
  Thanks in advance and I look forward at the hearing of your.

  Hi prates77,

  I'm sorry to hear that you are experiencing problems, file conversion. You receive a conversion error, regardless of the file you are trying to convert? The error occurs if you use the web interface, or convert by the reader? And a strange question: how many files you have stored in your Acrobat.com account? We have seen reports of this error when there are a large number of files stored in the folder root your Acrobat.com account.

  I can't wait to hear back on your part.

  Best,

  Sara