Since the last microsoft update does not have e-mail and internet access stopped

Similar Questions

• Since the last Microsoft updates, download HP printer no longer works.

  Original title: may not print on hp deskjet F4180 after shot, loading of the latest updates from microsoft.  Download driver hp several times.  Microsoft's response is did not recognize the hp logo.

  Can not print on Hp DESKJET F4180, after shot update microsoft, microsoft message is can varify LOGO.  Printer works when I print from my laptop, but not the destop.

  Hello

  1. What is the exact error message that you receive?
  2 have. the updates you installed?

  You can check the number of the update in the update history:

  1. click on Start, click all programsand then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

  The following article might help: printer in Windows problems

• Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product.

  Since the last automatic update from Microsoft, I get the message on Outlook & Excel I need to activate the product. When I try to activate I tells me it is already activated, they have been running fine since 2001 when the Office Proffesional was legally purchased.
  The pop-up with activation message has two buttons, "Remind me later" and the button "more..." which seems to send me around in circles when it is followed.

  Hi Dudlion,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code: code 80072EE2, computer will not update, since the last big update.

  Original title: 80072EE2

  computer will not update. also wdi prob host service. a lot of prob since the last big update. need help

  Hi Denny,

  We may refer to the article and check if it helps to solve the problem.

  Windows Update error 80072ee2

  Otherwise, you can read the article and try the steps to solve the problem.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop

• I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.

  Series of Microsoft Windows XP Home Edition 2002 SP3

  I lost power when a transformer blew on my street. I'm short Windows XP Home Edition Series 2002 Microsoft. I DO NOT have the original version that has been installed on my computer when I bought the PC.
  However, I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.
  Here is the information I have:

  PLEASE TELL ME WHAT TO DO!
  Thank you
  Tony
  E-mail address is removed from the privacy *.

  I can provide as much information it takes to get active Windows.

  Windows version: Microsoft Windows XP Home Edition Series 2002 Service Pack 2 installed
  System has been upgraded to Service Pack 3

  Name of the system:	D845EPI_
  Processor name:	Intel (r) Celeron (r) CPU 2 .80GHz
  The name of the BIOS:	BIOS Date: 26/09/03 15:01:32 worm: 08.00.08
  Adapter name:	NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  Installed memory:	2.00 GB
  Default printer:	Dell AIO Printer A92

  Internet browser: Mozilla FireFox 9.0.1 (x 86 en - us)
  2012 software-AVG current anti-virus & AVG PC Tune Up 2011
  I have Microsoft XP Home Edition with only SP3 Bootable CD
  I have a backup disk with my current data
  ________________________________________________________
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of system DELL-7089676EEE
  The system - INTEL_ manufacturer
  System model D845EPI_
  System Type X 86-based PC
  Processor x 86 family 15 model 2 Stepping 9 GenuineIntel ~ 2799 Mhz
  BIOS Version/Date Intel Corp., VA84510A.86A.0023.P08.0309261501, 26/09/2003
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  DELL-7089676EEE\DELL user name
  Time zone Eastern Standard Time
  Total physical memory 048,00 MB 2
  1.43 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.85 GB
  Paging file C:\pagefile.sys
  ______________________________________________________________
  Name NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  PCI\VEN_10DE & DEV_0110 & SUBSYS_00000000 & REV_B2\4 PNP device ID & 9BAF86 & 0 & 0008
  Adapter Type GeForce2 MX/MX 400, NVIDIA compatible
  Adapter Description NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  Adapter RAM 64.00 MB (67,108,864 bytes)
  Installed Drivers nv4_disp.dll
  6.14.10.5673 driver version
  File INF nv4_disp.inf (section lvl4)
  Color plans 1
  4294967296 colors Table entries
  Resolution 1024 x 768 x 60 hertz
  32 bits/Pixel
  0xFD000000-0xFDFFFFFF memory address
  0xE8000000-0xEFFFFFFF memory address
  IRQ channel, IRQ 16
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  Address 0xA0000-0xBFFFF

  
  Pilot c:\windows\system32\drivers\nv4_mini.sys (6.14.10.5673, 1.81 MB (1 897 408 bytes), 30/11/2011-11:11)

  Please change your key of product before it is stolen! -also delete your personal information

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• Using the stored procedure: Source does not have a target executable

  I'm a guy from MS - SQL, so I'm fairly familiar with T - SQL syntax, but feels a heck of a time trying to take the code I wrote for SQL and turn this works with Oracle.
  
  in any case, I'm using Oracle SQL Developer, and I have a stored procedure that calls the Alter Table statement and adds a column. Just trying to get this one to work before moving on to the other that I have. I get the message that source does not have a target executable when I try to run this command.
  
  create or replace PROCEDURE rta_conv_addcolumn (rtatablename1 in varchar (20),)
  rtatablename2 in varchar (20),
  rtacolumnname in varchar (256),
  rtacolumninfo in varchar (256))
  AS
  DECLARE rtasql VARCHAR (4000);
  BEGIN
  IF EXISTS (SELECT * from user_tables WHERE table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename2)
  Then rtasql: = ' ALTER TABLE ["+ rtatablename2 +"] ADD "+ rtacolumnname +" "+ rtacolumninfo;
  Run (rtasql);
  END rta_conv_addcolumn;
  
  If I try to compile I get the following messages, which make no sense, since the syntax I use to declare the input variables seems to be good.
  
  Error (1.54): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (2.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (3.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (4.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (6.1): PLS-00103: encountered the symbol "DECLARE" when expecting one of the following: begin function package pragma procedure < an ID > subtype type use < a between double quote delimited identifiers of > form current cursor external language the symbol 'start' is substituted for 'SAID' continue.
  Error (15.5): PLS-00103: encountered the symbol "RTA_CONV_ADDCOLUMN" when expects it one of the following values: If

  Adds the column to the table specified in rtatablename1, if there is neither rtatablename1 nor rtatablename2.

  NOT TESTED

  create or replace PROCEDURE rta_conv_addcolumn(rtatablename1 in varchar,
  rtatablename2 in varchar,
  rtacolumnname in varchar,
  rtacolumninfo in varchar)
  AS
  rtasql VARCHAR(4000);
  count1 number;
  count2 number;
  count3 number;
  BEGIN
    SELECT count(*) into count1 FROM user_tables WHERE table_name = rtatablename1;
    SELECT count(*) into count2 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename1;
    SELECT count(*) into count3 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename2;
    IF count1>0 AND count2 = 0 AND count3=0 Then
      rtasql:= 'ALTER TABLE '|| rtatablename1 ||'ADD ' || rtacolumnname || ' ' || rtacolumninfo;
      Execute immediate rtasql;
    END IF;
  END rta_conv_addcolumn;
  /
  

  Max

  Published by: Massimo Ruocchio, December 12, 2009 02:15
  Missing AND

• I have windows 8.1. Try to uninstall the software adobe reader XI (11.0.13), because it does not have to download and install again. a pop up comes up saying locate AcroRead.msi. When I found this file, it is not accepted. What can I do?

  I have windows 8.1. Try to uninstall the software adobe reader XI (11.0.13), because it does not have to download and install again. a pop up comes up saying locate AcroRead.msi. When I found this file, it is not accepted. What can I do?

  Hi georged67217474,

  Please refer to this threat: Re: get Acrobat install error how to fix?

  Let me know if it helps.

  Kind regards

  Meenakshi

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• Microsoft Update does not check the updates of VS2010 under XP SP3

  Updates of VS2010, or updates from Microsoft Update, can't find SP1 for VS2010, same if it should.

  This problem has been reproduced by Alexander Sun [MSFT] MSDN Community Support; its results can be found here http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/ac3a20c1-48f4-42fd-bda0-392f17e4753c/.

  He suggested I ask in this forum.

  
  How to obtain Visual Studio 2010 SP1
  
  For Visual Studio 2010 SP1, see the following Microsoft Web site:
       Microsoft Visual Studio 2010 Service Pack 1
  
  Source: http://support.microsoft.com/kb/983509 (last revision: April 18, 2011)

  Note that the page above (currently) does not state that VS2010 SP1 is available through Windows Update.

• I have CS4 and updated my OS x 7.5 in Yosemite 10.5 - applications are still there but will not open. He said that I had to restart the computer after which he said that there is an error 6. I have the license key but does not have a place to insert it.

  I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the

  Original key, but does not have a place to enter.

  We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.

• Since the last 2 updates my yahoo mail will not AutoFill contacts when writing emails

  This arrangement has worked well up until the last 2 updates and works fine on Safari browser. Addresses e-mail of the AutoFill is a very important feature for my business. Can someone help me please! Thank you!

  I understand that when you compose new email in yahoo who contacts is no longer AutoComplete.

  Please update your Adobe Flash version at 17 and check the settings for interactive web pages:

  • The JavaScript settings and preferences for interactive web pages

• the button new folder does not have System File Checker says no breach of integrity

  Mem of Windows 7 64 bit, Sony VAIO, 8 GB, the latest journals to install checked no found error. Keyboard shortcut for the new folder does not work, but good ciick new-folder is there and works. Said it was problem-no hard drive problems, File Checker said no violations. Did usual defrg, reg cleaner, virus scans, etc. New folder button Windows Explorer stopped working after I upgraded my backup of instant backup software Memeo Memeo Backup Premium. When I return at the moment (the button) works when I uninstall Instant, it works, but when I insall Premium button no longer works. Explore premium a integration of windows and instant does not work. I say that the problem is because of this, but of coarse Memeo said it's a hard drive issue or microsofts problem. No hard drive problem, it's almost all scanned and new directions. The registry is scanned. I played in windows since 3.0.Granted I'm not a programmer, but I put togeather computers (all Windows Basic) since the 1980s. Did do a little programming for timex sinclair Boy I'm giving my age :) away  I solved just a poblem resolved not technicians at Sony. They told me that my only option was to restore my computer to factory State and again UGH!  Found the problem of sony, a former .exe file which does not have ugraded when needed, the deleted files and the sony program now works fine!  If the ideas on my "new folder button?

  Found the answer! It was just like I thought Memeo Backup Premium has a subprogramme called backup that he mixes with the Explorer of Windows 7, uninstalled this (backup) and the new record button works again. Memeo people had me uninstall the rest of the software and gave me a link to download the software less backup. Now, I'm trying to find out if I will return my money or a fixed copy. No answer yet! But I don't think they work on Friday, so I'll have to wait beyond Monday to see if they're going to answer me. I tracked their problem they should pay me ;)

• my watch guard disconnect my 5s since the last software update iPhone

  Since the last update my watch guard disconnect from my iPhone.  I turned the phone market.  Turned bluetooth market. It connects temporarily, and then falls down.  both devices are within a few feet of each other.  also the continuous ringing start-up.  are there bugs in the new update?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.