Since the update, cannot load websites but other browsers may

Similar Questions

• Since the update cannot return to my home page

  Since Firefox updated I can't open it with my original homepage. Tried to change through the tools and it shows my home page, but it always opens to the mozilla page.

  Try this:

  Go to the site you want as a homepage, then try highlighting the url of the page and drag it to the home button on your toolbar.  It should set as your homepage. If that doesn't work go to the main options window of firefox and make sure that "Show my Homepage" is selected in the dropdown menu.  See the attached screenshots for more detail.
  

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• I can't synchronize my ipad or iPhone, since the update to version 12.3.3.17, it will recognize the iPad but think it's a new... Help

  Since the update itunes to the latest version, I can't sync my ipad or an iPhone, it deals so much new equipment. There is no other choice!

  Try to restart the AMDS > restart the Service Apple Mobile Device (AMDS) on Windows

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Since the update of Firefox, Google appears as a string of foreign characers

  Hi, since the update of Firefox, as the title suggests, any google page seems just a string of characters. I had pages like this before, but only for connections to live stream. I disabled all the plugins addons and Google-related, but the problem still persists. The solution in the other thread do with subject: config (failure of the change of an option to 'true'. The only other difference to it, is that it not connecting to http more, just https. Any help?

  Hey TheDefiniteArticle,

  We have followed this issue for a few days now. When he started to happen? Ask yourself if it is an update of the extension, or something.

  1. In the url bar, type about: config and press ENTER. Confirm that you be careful and move forward.
  2. In the search bar the top, past this text without the quotes "network.http.accept encoding.
  3. This should limit the values in the configuration file to a single line. Please tell me what you see in the column 'Value'?
  4. This field should be read 'gzip, deflate' without the quotes. If this isn't the value, double click on this field and paste this valley in.
  5. Restart Firefox and try a page that has had strange encoding before.

• Since the update to version 9.0.1 all icons for my favorites are no longer visible. Just copy/title. ideas/comments?

  Undated to ver 9.0.1 the other day. Since the update the icons for web sites are no longer visible in my bookmark menu. Web site titles are OK and all the links work but 90% of site icons disappeared, and those remaining is generic file icons.
  Memory cleared cache, without help, checked all the settings... no change.

  See:

  • https://support.Mozilla.org/KB/latest-Firefox-issues#OS=Mac & Browser = FX9

• As many problems since the update of the iPad iOS 9.3.  Grrrrrr!

  Since the update last night, here is the list of issues, I can't seem to fix OR find answers to solve:

  1. cannot connect to iCloud.

  I have already reset my network WiFi settings, did a restart of the force and also changed my password on icloud.com.  Nothing works.

  Whenever I put my password, it keeps "check failed: there was an error connecting to the apple ID server.

  2. continue to try to get into "iTunes and App Store, my iPad, but the whenever I do, the iPad hangs and I have to do a restart of the force.

  3 - unable to restore iPad from iTunes because I can't iCloud to work so I can't disable "Find my iPad" to do a restore

  4 - my whole iPad slowed to a bloody crawl and I constantly reboot of the force. »

  What the DEVIL's going on with this update and my iPad?

  Unfortunately this is a royal mess and you are part of a large number of serious problems. Take a look under settings > general > topic > Version and please tell us which version downloaded. We may be able to offer suggestions based on what you have.

  Also, please take a look at this summary by a very experienced user.

  For those having issues with the iOS 9.3 update please read...

• Product number: QH753EA #ABU: Wifi works do not since the update of Windows 10

  Since the update to windows 10 my wifi stopped working. The key of the keyboard is permenantly orange and that changes in airplane mode when you press. I can connect to internet with the ADSL cable. Network shooting report problems it says only: the "Wireles capability is disabled" but I cannot turn it on.

  Return you to W7.

  I highly doubt that Realtek will publish all the drivers for this model card W10 since they ceased support of the drivers for this card model to S8.

• I can't type or use my address field in safari (since the update to 10.11.3)

  The (9.0.3) Safari address field appears, but I can't place the cursor inside or type in addresses. Only way is to restart Safari, on the first page one, but a single entry in the address field is possible. And: The URL is presented as a "mess of letters" (letters positioned one above the other).

  I have the problem since the update to Mac OS 10.11.3

  Thanks for any help!

  I had this problem this morning too - after briefly of the Internet Scouting I found the only current solution is to disable the "include the Suggestions of Safari" under Search tab in the preferences.

• blue screen after Ko 2840149, error - "STOP: c0000218 {Registry hive failure} the registry cannot load the hive (file): \systemroot\system32\config\SOFTWARE.

  After I installed security KB2840149 on a 2008 VM w/exchange server that is running on the machine of Hyper-v server 2008 I'm dead in the water w / E-mail down hard.  The virtual computer is in a reboot cycle bluescreening before I can get anywhere.  Tried the last well known - no effect.  Safe mode - so bluescreens.

  BlueScreen info:
  STOP: c0000218 {Registry hive failure}
  The registry cannot load the hive (file):
  \systemroot\system32\config\SOFTWARE
  or its log or alternation.
  It is damaged, missing, or not accessible in writing
  I saw that it was a patch of replacement for a patch that crashed a lot of PCs.  Since there is no history on this patch, I wanted to check in a see what is the best way to fix this on a virtual machine?

  Being not so deep on VM, I wasn't sure if there was a better way. But I just put the virtual machine to load 2008 iso and then made the standard repair for registry problems off the coast of the article below.

  Of http:

  If the Windows registry is slightly or moderately damaged, you may be able to restart the computer in safe mode and use system restore to restore the registry from the computer to the last known good configuration. However, if the Windows registry is seriously damaged, all types of logon will be prevented. Trying to connect to Windows causes the system fails, then restart. In this case, you will need to boot the system into the recovery instead of Windows Console. Once in the Recovery Console, you can use the Startup Repair tool. Startup Repair tool automates common diagnostic and repair of the installations of Windows tasks starts longer.

  (a) start your Windows Vista or Windows Server 2008 DVD
  (b) on the first Setup screen click Next
  (c) in the lower left corner of the screen, choose "repair your computer".
  (d) on the System Recovery Options screen, select your Windows installation and then click Next
  (e) click on "Command prompt".
  (f) go to X:\sources\recovery > startrep.exe
  (g) this will take some time but will look at any registry related issues.

• Adobe Reader will not save a doc, since the update of the anniversary of Win10.

  Given that the Win10 birthday update, Adobe Reader (more later 15.017.20053) won't save a doc.  The doc will load, but when backup option is attempted, the void otherwise save the window pop and hold with an alternation of 2 x 2 table box is displayed.  2 x 2 flashes (not stable) If table not save window is empty.  Will not save the docs that would save before update since the update.

  The problem has been resolved by uninstalling the CD player and reinstall as suggested by Ms Community.

  I don't know if the suggestions of Shivam or Scottie1104 would have solved the problem, doesn't have the chance to try them.

  Thanks for the suggestions!