Since Windows 10 on Dell Studio One, impossible to scan with Pixma MG3100

Similar Questions

• Help need drivers for Dell studio one 19 windows 8

  Hello..

  I have a dell studio one 19 touch screen... I have install windows 8 64 bit on it. and all the drivers when they are well.  However I have problems with the set screen Generict PnP monitor and other features like the coprocessor.  I can't use the screen as a touch device as right need driver.

  So can someone knows these drivers?  I enjoyed a lot of help.

  AACM

  Hi AACM.

  Dell has not tested 19 Studio with Windows 8. For more information, refer to link: http://dell.to/U7cW0Q

  You can try to install 'Nvidia MCP, 7A', 'pilot NextWindow Touch Screen' and the Application in compatibility mode (for windows 7) and see if it works. To learn more about compatibility mode, you can refer to link: http://bit.ly/WcIF2t

  Answer please for more details.

• Dell studio one 64-bit operating system

  I have a Dell Studio one operating system 64-bit and need to know if I can install a 32-bit operating system on his computer without any problem.  I have several programs that can only be used on a 32-bit system. Please tell us if this can be done and what to buy to do.

  http://support.Dell.com/support/downloads/index.aspx

  Check on the Dell site above to ensure that the Vista 32-bit drivers are available for your model computer.

  You must then buy a license and Vista operating system 32-bit full disk and do a clean install of the 32-bit operating system.

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• What to do when dell studio one 1909 screen is not calibrated

  I have effectively had to completely reinstall windows 7 on my computer due to a problem with the system and when I reinstalled all the software I found that when I start the software system touch will work on the login screen but once the computer is in touch is no longer work.  I tried to run the calibration of touch and it will turn on and will recognize that you are touching the arrow screene will always go to the top right of the screen and never go to the next part of the screen.  I found this key works perfectly with the program of the battery and that's it.  It's very strange how ts acting.  I have re-uploaded the application of touch screen without changing the performance so I am at a loss.  Of course, my mandate has missed 18 days ago go figure!. Any ideas?

  Hello

  Method 1: Clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2: it seems that the drivers are not updated on your computer. So, I suggest you to update the drivers and check if that helps.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can download the drivers manually and install from the link below.

  http://www.dell.com/support/drivers/us/en/19/ProductSelector/Select/FamilySelection?CategoryPath=all-products%2Fesuprt_laptop%2Fesuprt_studio_laptop&Family=Studio&DisplayCrumbs=Product%2BType%40%2CLaptops%40%2CStudio&rquery=fkey-e-Drivers_PS

  Also, here are a few items of assistance that could help you with this. You can check those.
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_737099F9F10135FBE040AE0AB6E14629&isLegacy=true

  http://support.euro.Dell.com/support/topics/global.aspx/support/KCS/document?c=za&cs=RC1078563&l=en&s=pad&docid=DSN_737099F9F10135FBE040AE0AB6E14629&isLegacy=true

  I hope this information helps you!

• Windows 7 stops - Dell Studio XPS 7100 shows Advanced Pattern Memory Test failure - WME02-CIF.

  Unexpected stops of Windows 7 on my Dell Studio XPS 7100. Analysis of material shows Advanced Pattern Memory Test failure - WME02-CIF. Repairable?

  Hi Gary C47.

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Try to run the Memory Diagnostic tool and check.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

• Reinstalled Dell printer, now impossible to scan, the message "printer cannot download applications available.

  I uninstalled my printer Dell because of printing problems (problem of subspooler and was unable to delete the document that was sent to print).  When I reinstalled the printer, I was able to print but when I try to scan to the computer, the printer is unable to download apps.  (I need to scan photos and documents from Adobe).  Obviously, outgoing communication to the printer is correct.  Any suggestions?

  * original title - impossible to scan at download Computer Applications *.

  Hello

  ·                         try to uninstall and reinstall and use the latest drivers for VISTA for your model of DELL printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• The mouse driver and Touchpad Driver for Dell Studio laptop will not work with Vista

  I just bought a Dell Studio laptop at new years 2009 with the Vista platform.   I had nagging problems with the mouse driver and the touchpad pointer that were completely related software.  These questions were returning back over the months and months.   I've owned about 10 PCs since 1989 and I've never had a bad result like this.   My wife and I have lost 20 to 30 hours of our time looking after him.   This could have the Vista operating platform?   I suffered so much that I made my decision to seriously consider the range of Apple computers.   At this point, I lay the responsibility for the drivers who did not also work on Microsoft and Dell.  20 - 30 hours can go a long way in learning the OS from Apple.    I am a professional project management and professional engineer and can't believe that something as basic as the mouse driver and the driver of the Touchpad was a goner at the launch of the computer screwup.   I guess that the validation of test have been ignored.  I have never been madder with any computer I've owned.  I learned a lesson from this.   Do not trust Dell or Microsoft in the manufacture of new products.  As far as I know Apple users don't get treated this way.

  Sorry, but I really cannot speculate more what happens - or go - with your computer without being able to see the machine. It's the first time, you mentioned a bluetooth mouse and that you have installed the drivers three times. Certainly a bad image would not apply in this case. There are probably other things that pass only someone actually looking at the machine would be able to discern.

  However, since this is a new laptop and you are unhappy with it, return it under warranty and buy something else. I'm sorry that I wasn't able to help you. MS - MVP - Elephant Boy computers - don't panic!

• Connection issues computer laptop Dell Studio of Sony Bravia tv with hdmi

  I had previously connected my Dell studio to my Sony Bravia HDTV using an HDMI cable no problem. Would default to display only on the TV and the white screen on laptop. Now I get the signal not supported, I have even with the double posting, but works with extended display. I'd love to get it for display on the tv only or duplicate. I use my cell phone as a media device and tv as a monitor.

  Hello

  Check:

  http://support.Microsoft.com/kb/976064

  http://www.Dummies.com/how-to/content/how-to-set-up-multiple-monitors-with-Windows-7.html

  http://HOWTO.CNET.com/8301-11310_39-20078955-285/how-to-set-up-dual-monitors-in-Windows-7/

  http://Windows.Microsoft.com/en-in/Windows7/work-and-play-better-with-multiple-monitors

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• Reference Dell 968 AIO, Windows 7 on Dell Studio XPS - messed up

  I have a Dell 968 AIO which was printing on the use of pilots (probably the original) on my Dell XPS Studio 8000 Win 7 pc, a week ago. He stopped printing a few days ago.

  I assumed the problem was the drivers and not the ink. So I tried to install the new drivers. It does not solve the problem. Indeed, the new drivers would not install completely. When he got to the last step of the installation the Setup program just hung. More on this in a minute.

  I bought new ink cartridges and allowed me to test the 968 printer and it prints very well now.

  However, when I tried to print a document from the computer.

  I tried to uninstall the old drivers and reinstall new drivers. Unfortunately, I got the USB cable is plugged. So I have messed up, and it would not print. He could not "locate the file. I tried after I unplug the USB stick and a running registry cleaning. Still no luck, but worse, I noticed that the installers had left a lot of luggage around.

  • There is a folder c:/dell/drivers/986, which seems to have a lot of the old drivers.
  • There was a folder c:/program files (x 86) /Dell AIO Printer 968
  • And there is also a folder c:/program files (x 86) (x 86) /Dell 968 AIO Printer.

  I followed the steps for a clean uninstall, and it is where I am now. However, there a lot of carrying files around in Dell matter folders on my hard drive.

  I'm sure I made a complete mess of things, can anyone help?

  Wendy

  Wendy,

  When you reinstalled the operating system, have you installed the desktop system software / laptop (as appropriate) and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Once you have corrected, then we can work on the printer.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Reference Dell 968 & 968w all-in-One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• 10 Windows on a Dell Studio 1558 laptop?

  Hello

  I have a laptop Dell 1558 Studio (2010 model) with 6Gig RAM and a corei7 system running a 64 bit version of Windows 7.

  I was wondering if installing a Windows 10 on my laptop would work or not? I've heard say that 10 is a lighter Windows and less buggy than 8 or 8.1 of cause (I had installed 8 and wished that I didn't, then returned to my 7 64 bit as soon as possible).

  So Windows 10 support of older laptops like mine? She would work in reality without lag? like I said mine has a 6gig RAM and a core i7.

  Thanks it :)

  See where to find the hardware drivers

  Furthermore, I was not able to find a Dell Quickset version that works with Windows 10.  I do not seem to miss something significant as well-

  1 I do not have the Dell battery meter but I can use the Windows 10 PowerCfg utility report on the State of the battery in place [in an Admin cmd window, powercfg-energy > D:\Desktop\EnergyReport.txt]

  but

  2 my multimedia / function keys work as they always have [they are actually controlled by the bios despite some references to them in the documentation of QuickSet].

• MY dell studio one 1909 screen problem

  Weird Ramdomly of my missing screen,

  Hello

  By asking where you are based, I mean what country you are currently.  If the problem persists, the best thing to do is support the appeal in Malaysia, but I hope it's fixed for now.

  Contact information for the Malaysia: en.community.dell.com/.../20203456.aspx

  Concerning

  Kevin

• Impossible to scan with Windows 7

  I have a HP Photosmart D110 series printer and it is connected to my newer computer operating systems Windows 7.  Since I bought this new computer, I have not been able to use the function scanner of the printer.  I can still use it on my old system that has Windows XP.  Any help on how to solve the problem is appreciated.

  Download and install the drivers and the newest comprehensive software on the web site of HP here.  Try now.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=4023244&prodTypeId=18972