single result files (1 file created by USE)

Similar Questions

• No PDF file created when used section break and no data in the XML group

  I have this problem that Tim Dexter documented on a few years back...
  
  http://blogs.Oracle.com/XmlPublisher/output_formats/
  
  "When you use @section in your model for orders,"for-each"or" each group"- (e.g. <?). for-each@section:...? >), then a vacuum/invalides PDF can be generated if the XML data file has no data for this foreach loop. »
  
  That's my exact problem. Yet the instructions do not completely solve my problem. I add another section at the end of my RTF break and he gets the page to see... but I get an extra page at the end of all the populated xmls
  
  Is it possible to delete this page?

  Hi Jason,
  I would like to see your model and data.

  You use @section and add condition to make the page without data.

• Merger of the other files in a single pdf file.

  I can't merge several (other than pdf) documents into a single pdf file. I use Adobe Acrobat X Pro, for

  I can't do the same thing either when I try to combine word documents or text documents as they are dimmed and you cannot select in the dialog box add files... you can choose .pdf files, but not the word... using Mounatin Lion Adobe acrobat Pro version 10.1.5 documents

• Updated Firefox to v - 43.0 resulted in the message: "create a PDF file cannot be verified for use in Firefox and has been disabled."

  Updated Firefox to v - 43.0 resulted in the message: "create a PDF file cannot be verified for use in Firefox and has been disabled."

  A solution to this problem will be appreciated.

  Thanks in advance

  Hi stephenm26904611,

  Thank you for your bug report about the extension to create a file PDF Acrobat being disabled in FF v43.

  It is a known issue and we are working on that.

  We intend to provide support in the future updates.

  Meanwhile, as a solution, you can use Adobe Create PDF extension for Chome and Internet Explorer, or use Acrobat to convert web pages to PDF.

  Thank you

  Nicos

• How to use aggregator to create a single swf file from multiple files

  Hello world

  I'm working on the customer requirement where I have to create a 2004 SCROM video base. Its basically a PPT inside the captivate file. And it has about 175 slides in the file. Some of the slides have animations, voice-over. I am facing a problem in the EDITING of the file in the single SWF file format. Whenever I publish the slides as SWF, it creates several SWFs, the skin of the player and other manifest, Scorm 2004 Swf files.

  I only want one single SWF file in which all slides must be indicated on it. Do not know, why it's happening? I tried aggregator for this also, but it didn't work... The Skin.swf added easily and do not add any other files. It shows me an error: "Name.swf is not a Captivate AS3 file...". »

  I'm new on this. Please help me because I have a very short time to do this.

  Thanks and greetings

  It was a little hitch - now resolved. Get an output in a single SWF file. Just removed the check mark the option publish settings "Enable SWF for the conversion of i-phone application.

• Generate a single XML file of the multiple JDBC result set

  Hello
  
  I need to create a single XML file of the multiple result set. The code below is to generate a XML signle leave a single result set, but suppose we have five different tables in the same database and the tables aren't relalted to the other.
  
  for example: select * from SAMPLE_PRODUCT
  Select * command
  Select * LOGISTICS... and many others.
  
  
  You can create multiple sets of results by top queries but how can write all values using a JDBC result set in a single xml file? Help, please.
  
  a signle file xml from one generator result
  
  import java.io.StringWriter;
  import java.sql.Connection;
  to import java.sql.DriverManager;
  import java.sql.ResultSet;
  import java.sql.ResultSetMetaData;
  
  Import javax.xml.parsers.DocumentBuilder;
  Import javax.xml.parsers.DocumentBuilderFactory;
  Import javax.xml.transform.OutputKeys.
  Import javax.xml.transform.Transformer;
  Import javax.xml.transform.TransformerFactory;
  Import javax.xml.transform.dom.DOMSource;
  Import javax.xml.transform.stream.StreamResult;
  
  to import org.W3C.DOM.document;
  Import org.w3c.dom.Element;
  
  public class JDBCToXML {}
  
  Public Shared Sub main (string args []) throws Exception {}
  DocumentBuilderFactory plant = DocumentBuilderFactory.newInstance ();
  DocumentBuilder builder = factory.newDocumentBuilder ();
  Doc document = builder.newDocument ();
  Element results = doc.createElement ("Results");
  doc.appendChild (results);
  
  Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
  Connection con = DriverManager
  .getConnection("jdbc:odbc:RIS","USER","USER");
  
  ResultSet rs = con.createStatement () .executeQuery ("select * from SAMPLE_PRODUCT");
  
  ResultSetMetaData rsmd = rs.getMetaData ();
  int colCount = rsmd.getColumnCount ();
  
  While (RS. Next {}
  Element line = doc.createElement ("Row");
  results.appendChild (row);
  for (int i = 1; i < = colCount; i ++) {}
  String columnName = rsmd.getColumnName (i);
  Object value = rs.getObject (i);
  Element node = doc.createElement (columnName);
  node.appendChild (doc.createTextNode (value.toString (()));
  row.appendChild (node);
  }
  }
  DOMSource domSource = new DOMSource (doc);
  TransformerFactory tf = TransformerFactory.newInstance ();
  Transformer transformer = tf.newTransformer ();
  transformer.setOutputProperty (OutputKeys.OMIT_XML_DECLARATION, 'yes');
  transformer.setOutputProperty (OutputKeys.METHOD, "xml");
  transformer.setOutputProperty (OutputKeys.ENCODING, "ISO-8859-1");
  StringWriter sw = new StringWriter();
  StreamResult sr = new StreamResult (sw);
  transform. Transform (domSource, sr);
  
  System.out.println (SW. ToString());
  
  con. Close;
  RS. Close();
  }
  }
  
  Thank you
  Sumit
  
  Published by: user8687839 on April 4, 2012 23:04
  
  Published by: user8687839 on April 4, 2012 23:09

  As EJP says, you really want to get the data in a single request, if possible (and I don't see why that shouldn't be the case).
  In fact, you really want to get this query to return the data as close the format you need as you can.

  If you did this on Oracle, for example, I'd get Oracle to produce XML that you can then turn (assuming that you could not itself produce the XML you want directly).
  In your case, using some db (access?), and then just get the line structure such as the conversion to XML involves the least amount of faffing about.

  Rethink the SQL and the rest should be easy.

• using a hp 6500 - how to scan several image documents and keep them in a single image file

  using a hp 6500 - how to scan several image documents and keep them in a single image file instead of hafving to create a separate file for each page?

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-6500-scan-multiple-pages-into-one-PDF-file/TD-p/252650

  This previous thread should help you.

• Combine files into a single PDF file from the button create

  I use Adobe Acrobat 10.1.13 and try to Combine files into a single PDF file of the Create button. There are four leader types .pdf .doc .xls .dwg the only file that appears in the combine the dialog box is the .pdf

  You will need Acrobat Pro to accomplish the task.

  Acrobat Standard can only combine PDF files.

  Be well...

• Media Player 12 on windows 7 is unable to play sounds on mpg file created using arcsoft total media 3.5

  in question .mpg files use the audio codec of arcsoft. These same files play with sound on wmp 11 Vista ultimate on another machine. Both have total media 3.5 installed.

  These .mpg files also do not play in the computer of windows 7 using win 7 media center or film maker.

  WMP 12 shows that the arcsoft audio codec is installed.

  In addition, some .mpg files created by ArcSoft show no video or audio in wmp 12, but work correctly on vista with wmp 11 system.

  a noticeable difference in technical support for windows media information is the presence of Microsoft MPEG-1hd Audio decoder under the mpeg/dvd filters in the list for wmp11 but not wmp12. I am unable to find this codec for installation.

  any suggestions on how to find sound would be greatly appreciated. Thank you.

  Addendum: other mpg which were extracted independently of Arcsoft files also do not play sound in wmp 12. The property indicates the same audio codec association of arcsoft. Tried to uninstall and install the window media components but no change.

  Thank you!

  I had the same problem one solved it just by setting filter audio decoder arcsoft merit for 0 x 600000 with Gspot.

  JDCR

• Combining three versions in a single backup file using the batch client/config file

  Hello again,

  Is there anyway to get three versions in a single backup file using a config file and the batch client, currently we have this Configuration file:

  [General]

  Operation = Multiple

  Username =

  Password =

  URL = net. TCP://localhost: 5210, Oracle, Drm, ProcessManager

  LogFileName=D:\DRM\VIPTBAU\LOG_FILES\logfile.log

  [Activities]

  OperationCount = 3

  Operation1 = VIP_DIMENSIONS

  Operation2 = ACCOUNT_RF

  Existence3 = ACCOUNT_BS

  [VIP_DIMENSIONS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_VIP_DIMENSIONS

  filename = VIP_DIMENSIONS

  [ACCOUNT_RF]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_RF_ACCOUNT

  filename = VIP_DIMENSIONS

  [ACCOUNT_BS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  
  

  which generates three separate files. We tried using a single operation and listing the 3 times of the VersionAbbrev, but that didn't work and also list the 3 versions in a VersionAbbrev.

  If anyone has any ideas they would be greatly appreciated

  See you soon

  Chris

  Hi Chris Harris-Oracle

  DRM client batch supports export several versions of a single file and restore it back. You must specify the defined version name and the delimiter.

  You can configure the cfg below the backup file

  [General]

  Operation = Multiple

  Username =

  Password =

  URL = net. TCP://localhost: 5210, Oracle, Drm, ProcessManager

  LogFileName=D:\DRM\VIPTBAU\LOG_FILES\logfile.log

  [Activities]

  OperationCount = 1

  OP1 = VIP_DIMENSIONS

  [VIP_DIMENSIONS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  Delimiter = comma

  to restore

  [VIP_DIMENSIONS]

  Operation = RestoreVersionFromFile

  Connection = MONTH_END_BACKUP

  SourceVersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  TargetVersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  Delimiter = comma

  Try it tested and it works very well

• Pe11 create video using MTS - better conversion files?

  Hello

  I used iMovie 11 for a couple of years now, but have noticed lately that the quality of my new images from the video camera has become very grainy and a significant loss of quality compared to the original of the MTS files I have - especially when someone is dressed in black, you can see the video becomes grainy how.

  My video camera is a panasonic sd-80 which creates MTS files.

  I decided to give PE11 a go and my question is what is the best video output for me to create without loss of quality?

  I use a Dell XPS8500, 8 GB Ram, 3rd Gen i5.

  The final file would be used to watch on a pc or a stream on PS3.

  Thank you

  Probably the best return for your PS3 would be a BluRay disc - well you can only burn a DVD if you have a BluRay disc burner on your computer. However, you might want to burn files on a DVD for your PS3 BluRay if your video is less than 20 minutes long with the help of publish & share/disc/AVCHD with the 4.7 GB preset.

  For display on your computer, I would recommend that you use to Publish & share/computer/AVCHD with the YouTube HD preset. This will produce an MP4 which should be almost identical to your original video quality.

• SV 9.3.3 office 2010 cannot open 17.2 MB file created using office 2003 excel

  I'm testing smartview 9.3.3 with Office 2010 and unable to open a large excel file created using Office 2003. The file has 39 tabs and all tabs contain formulas for HsGet. Is there some setting I need to change the first to allow this file to open it in excellent 2010? What is a macro setting?
  
  Thank you

  This is probably due to a problem with uncompressed metadata stored in the workbook. In most cases, the issue is found in the first journal in hidden forms. There are a few options to fix this. This file should also be open, but it may take a very long time, in some cases, the file opens fine with SV disabled in other cases, it won't matter.

  Option 1

  Open the file (it may take a while)
  Save the file under a XLSX file.
  Try to open it again.

  Option 2

  Open the file (it may take a while)
  Right click on the tab for the first worksheet calculation and "select all sheets.
  Right click on the tab for the first worksheet and "move or copy...". »
  In the dropdown select '(nouveau classeur)' and check 'create a copy '.
  Save the new book in any format.
  Try to open the new book

  Option 3
  Open the file (it may take a while)
  Run the following with the first worksheet selected VBA:

  Void ClearFunctionCache()
  For each oShape in ActiveSheet.Shapes
  If LCase (left (oShape.Name, 19)) = "workbkfunctioncache" then
  oShape.Delete
  End If
  Next
  End Sub

  Save the new book in any format.
  Try to open the new book

  In any case, try the refresh operation and save and reopen the file to ensure that the problem does not return.

  Make a backup of the original file before making any changes.

• It is possible to combine several PDF in a single pdf file using document cloud

  I would like to combine several PDF files, which are in the clouds of Document into a single PDF file. Is it possible to do in the DC, without first download the files on my desktop computer?

  Hi jay,

  You can do this online if you have the Acrobat DC tickets or you subscription to Adobe PDF pack https://cloud.acrobat.com/combinepdf . Is not possible within the application itself.

  Kind regards
  Nicos

• Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

  Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

  The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

  

  If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

  Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

  1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

  2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

  1. Click the Start button, point to settings, and then click Printers.
  2. Double-click the add printer icon.
  3. Click the next button.
  4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
  5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
  6. In the available Ports box, click FILE, and then click Next.
  7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
  8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

  3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

• Unable to find files and folders using Windows Search

  Original title: Windows search returns no results, but only for a single user - another user works very well - Windows 7

  All of a sudden windows search of files and folders (from windows Explorer) do not return results - even if I'm looking for in a folder with a file name that I know is in there.  However, it works for the other user on this system.

  The things that I tried or looked at who did not work:

  • Configuration of the default folder options.
  • reconstruction of the index
  • sfc/scannow - said "windows Resource Protection found corrupt files but was unable to solve some of them.  I have the CBS. If necessary log file.
  • research done that windows has been archived 'Tour of the windows features turn on or off.
  • Ran the registry of Windows Search - he said that he fixed two things (cannot tell you what they were now), but still, it does not solve the problem. When I run it says once again that there are no errors.
  • I checked this registry key:
    HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAdvanced\\\ and key Start_SearchFiles - which was set to 2, the default
  • Under Customize Start Menu - search with public folders is selected under search for other files and libraries.

  It still does not work.  The search box in the start menu seems to work, but not for anything I get.

  Frustrated!

  ~ Diane

  Hi Diane,

  Thanks for posting your question in the Microsoft Community forums.
  The description of the problem, I see that you cannot search files and folders using Windows Search.

  I appreciate your efforts try the troubleshooting steps to resolve the problem. Don't worry; Let's try a few steps that will help you solve the problem.

  Did you the latest changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  
  Open the troubleshooter for search and indexing
  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Improve Windows search using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Check out the link for more information.

  
  Change advanced indexing options
  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  
  Advanced search tips in Windows
  http://Windows.Microsoft.com/en-us/Windows7/advanced-tips-for-searching-in-Windows

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.