Siri does not recognize my home?

Similar Questions

• Siri does not recognize the voice.

  My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

  Are you pressing the button of Siri (micro) when you talk?

  Have you enabled Siri in settings > general > Siri?

  If so, then try a reset by unplugging the power cord for 30 seconds.

• iPhone 6s siri does not recognize contacts

  I can't ask Siri to make a call or send a text. I get a something is wrong message, try again. Or, sometimes, she knows the name, but can't find the number. All my contacts are on my phone. I recently upgraded from 5 to 6 seconds. I'm out of ideas.

  • Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  • On your iOS device, make sure that Siri is enabled under settings > general > Siri.
  • Restart your iPad, iPhone or iPod touch.
  • On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  • Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  • If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  • Contact Apple support.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

• Unable to connect to the internet, WLAN will only connect to "local access" and does not recognize my home group / network

  I bought a new router and configured the router by using the LAN connection.  now want to connect via a WLAN and cannot.  It connects to the router, but not through the gateway.  all other computers connect very well.

  Connection info says Uniidentified network

  Solved the problem by returning to the bottom of the network security to WEP

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• Computer does not recognize the CD - RM when connect camera on Windows 7 Home Premium

  I have windows 7 Home Premium and just today my computer does not recognize my CD so I can add my camera to my computer. I worked on it for about 6 hours. looking everywhere and tried most everything, but it still doesn't work? Can you help me? Thank you..

  Try to use a DVD cleaning disc to clean the disc.  If this fails so that the reader has probably not and must be replaced.

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.

• My HP Pavilion dv5 Windows 7 Home Premium does NOT recognize my sd card

  I need help! My computer does not recognize my sd card, or my sd card to my micro sd card adapter. I'm starting to think is housing, given that the sd card is recognized on my cell phone.

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems. If it's the USB adapter, it can be removed/disabled in BIOS

  and/or Device Manager and a used external is not that expensive.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Siri does not not on Sierra

  I upgraded to Sierra and Siri does not work.  I hear the beep that Siri has been activated but when I speak there is no movement of waveform in the window of Siri, or in other words is not hear me.  When I go to system preferences, according to me, the microphone is hear me when I talk with the bar meter moving as we speak.  I even tried my Bluetooth headset as an alternative source and SIri doesn't always recognize my voice.  Any ideas?

  I had the same question, you must first click on the microphone in the Siri dialog box that should activate your microphone. This has not worked for me immediately so I disabled Siri then activated it again and now it works, good luck.

• "Hey Siri" does not work on iPad Air after updating iOS 10

  iPad Air does not "Hey Siri".  On the other hand, Siri works when I hold the home button.  I disabled Siri and then turn it back on and did the same for the Air iPad and not luck.  My iPhone IS working as it should with Siri.

  Hi Charles!

  I see that you are curious, why "Hey Siri" does not work for your iPad Air after update to iOS 10. I know it's important to make sure that everything works correctly after an update. I'm happy to help you!

  Looks like your iPad model is not compatible with this feature, unless it is plugged into a power source. The problem persists while your iPad to the that air is charging? Take a look at the following Web site:

  Enable or disable the "Hey Siri" and customize the functionality

  To ask questions without pressing the Home button, plug your electrical appliance and turn on ' Hey Siri. With iPhone 7, iPhone iPhone iPhone 6s, 6s, 7 more more, iPhone and iPad (9.7 inches) Pro SE you can use this feature without plug power.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

  Have a great day!

• Siri does not not on Apple TV remote

  I bought an Apple TV (4th gen) on the release and everything worked perfectly.  A few days earlier, Siri has stopped working on the remote control.  I press the button Siri, it appears on the screen, but it does not recognize my voice commands.  It's as if the microphone is not working.  I have reset the device and the remote, but no change.  Any thoughts?

  Check if you have the function of zoom accessibility enabled in your settings, this is known to stop siri works correctly.

• Apple tv does not recognize my computer

  Hi all

  I have the latest version of the Apple TV software. On my Mac Pro, I run two OS 10.6.8 with iTunes 11.4 or OS 10.10.1 with iTunes 12.0.1. I have home sharing enabled in iTunes on both of these configs. But my computer does not recognize my Apple TV on the local WiFi network that I put in place. When I click on the "Computer" icon in Apple TV, he tells me to 'turn on home sharing. Someone at - it suggestions?

  Thank you.

  Dennis

  The following article can help you.

  Troubleshooting home sharing

  Problems of security software

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned on this page useful.

• IPod Classic does not recognize Itunes library after updating 12.4.1.6

  After (sigh, unconsciously and unintentionally) update my Itunes 12.4.1.6 Macbook Pro, my Ipod Classic is as it does not recognize the Itunes Macbook is the parent library. I made a few additions to the Macbook Itunes playlists, but my Ipod sync... at least do not unintentionally erase all currents (gulp, 157 GB of data) and re-import the entire library again. Is there a way to get around this? I did have this problem - at least I don't remember having it-advance updates to Itunes, where the Ipod no longer recognizes the Itunes Macbook as his home library. I ran a "check disk" on the Macbook and Ipod, and they are both clean, no sign of corruption. FWIW, I use the laptop on Mavericks, OSX 10.9.5.

  Did you have to add your media to the library after the update? See the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Windows does not recognize iPhone/iPod devices

  I tried to add music to a new iTunes library to my iPhone on my pc when I accidentally pressed the notification "do not trust this computer."

  I tried following the advice in this thread (removed the pilot): I accidentally hit "Do not trust" and now my iPhone won't sync to my computer. It won't ask me to trust him again even when I restart everything. Now what?

  And now my computer does not recognize my iPod or my iPhone when I plug it into the USB ports. They don't even charge. I know with certainty that the problem comes from my pc because when I plugged them both in another pc, Lesmanteaux both able to connect to the computer/iTunes. I tried restarting both devices, tried resetting the location and privacy, by restarting the computer, even performed a system recovery.

  When I go to "Devices and printers", the two devices are listed under Unspecified, Apple Mobile Device USB Driver, unknown category, troubleshooting needs (I tried that as well, when I do that it is said that all driver software is up-to-date)

  Driver status: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  All my software is up to date (iPhone, iPod Nano, Itunes 12.1. (2. 27 64-bit)

  Please help me, I've got a flight tomorrow and all I wanted was to upload music.

  Have you tried using different USB ports? Try and see if it triggers the question "confidence." You can also give your iPod a restart is forced. Press the sleep and home for about 20 seconds. When you see the silver Apple, let go and let it reboot, then try again.

  If this does not work you can try something a bit more drastic. That's a lot of time, but not horrible. I had to do a few times with my devices and my computer.

  Try this, go to your control panel, add/remove programs.

  Remove iTunes (you won't lose any content not the program, I've done a few times), Mobile Apple, Apple Application Support device driver.

  For good measure, you can restart your computer just to remove the cobwebs.

  Then come out and redownload iTunes and reinstall it.

  Plug your iPod in and drivers must be reinstalled.

  All of your old info should be there. I've never lost anything. Essentially to remove iTunes and drivers have to reinstall fees, which can remove the obstacle 'I don't trust you. "