Siri does not recognize the voice.

My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

Are you pressing the button of Siri (micro) when you talk?

Have you enabled Siri in settings > general > Siri?

If so, then try a reset by unplugging the power cord for 30 seconds.

Tags: Apple TV

Similar Questions

  • Before do not recognize the voice dial commands

    I have PRE (he loves) with blue Ant Q1 headset. T1 has commands voice speed dial which supposedly map on the first 8 speed dial numbers PRE; However, the PRE does not recognize the voice command and the call is not made. Anyone know how to configure the PRE to recognize BlueTooth voice commands?

    Dude... I think that there was a ton of messages until this case to this.  Basically, the pre does currently support voice dialing, according to the these positions.  Perhaps a future Bluetooth update?

  • Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

    I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

    What is your indication that the DVD is not recognized?

    Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

    I did all the updates and it does not see the DVD in the DVD drive.

    If you put another type of disc in the optical drive, as a music CD, it is recognized?

  • I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

    I uninstalled flash on my mac now youtube videos will not play.

    the error says safari does not recognize the video formats available.

    Reinstall the Flash Player... Why did you remove it?

    Barry

  • I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

  • ITunes does not recognize the phone

    IPhone SE, Windows 10, update ITunes, McAfee

    Connect the phone to the computer and the window phone company recognizes the phone immediately.  I close the phone company of the window and open ITunes.  ITunes does not recognize the phone.  I have the menu bar, select file > currencies, all the options are greyed out.

    Disable McAfee, and then try again.

  • Apple TV does not recognize the Apple wireless keyboard

    My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

    Thank you

    Ken Templin

    I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

  • Satellite M50-A-110 does not recognize the new SSD?

    Hello

    I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

    They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

    Someone knows how to solve this mess?
    Toshiba has a BIOS beta I could try?
    Any other ideas would be welcome.

    As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

    Hello

    I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

    I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

    I would recommend to check the SSD for the firmware update!

  • Does not recognize the external HDD PH3100U-1EXB

    Here's my problem...
    I unplugged my hardrive ex the other night and he fell about 2 feet. Today, when I plugged in again, the computer does not recognize the device. I get the message "disk or network connection that the shortcut, Toshiba - HDD is unavailabale.»

    Ive tried to plug it into different usb ports without success. The worst thing is that ALL my photos are there, is there a way to recover the them.or I'm screwed?

    You can test it on another PC or laptop?
    Just to be sure it is not somehow connected to your PC at home.

  • Satellite C650 - 1 CT does not recognize the CD/DVD

    Hello

    I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

    Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

    System details:

    Satellite C650-1 CT PSC08E-03M001EN
    OS: Windows 7 64-bit
    Place/country: United Kingdom

    Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

    Thank you
    Lamin

    Post edited by: jammehkunda

    As first step try please remove the optical disc drive from Device Manager and restart your laptop.
    After doing this review please the Device Manager and let us know if the problem persists.

  • Portege R700 - Autocad 2011 does not recognize the graphics card

    Hello

    I have toshiba Portege R700 with 64-bit win 7 installed.
    I need the computer for use with autocad 2011.

    For some reason any auocad does not recognize the graphics card installed on the computer.
    I suspect it because very little memory is allocated for the graphics card.

    How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

    Thank you very much!

    Hello

    What Portege R700-xxx you have exactly?
    As far as I know the graphics memory cannot be assigned manually.
    Everything is controlled by the graphics driver and you have no influence on this

    You can try updating the graphics card driver maybe it would help.
    The most recent driver found on the page of the European driver Toshiba
    If not, you should check the manufacturer of the graphics chip driver

    Good luck

  • Satellite 1900 (PS192E) - does not recognize the CD/DVD

    Hey all,.

    I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

    When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

    If there is someone out there who could give me some advice, I would be extremely grateful.

    Thank you very much

    James

    Hello

    OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
    What version of Windows is it?

    If you want to install a driver for the graphics card go into Device Manager and select Update driver.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

  • TS15g067cl laptop: memory card reader does not recognize the card

    The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

    Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

  • Portege Z930-118 does not recognize the external USB CD/DVD drive

    My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

    The CD/DVD device does not even appear at all in Device Manager.

    The reader is a SE-S084 Samsun and works well on another laptop.

    I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

    Hello
    I m not very well how to help you.

    I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

    I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

    From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
    I think the reader needs more power provided by a single USB port.

Maybe you are looking for

  • Fake account in 10.10.5 reinstall web suite.

    These fake account are hugely concerning. They seem to be hidden on the system... What happens and how can I get a clean install? I have a Mac Mini 2010, no CD/DVD drive...

  • How to block certain websites?

    I would like to know how to block certain websites like MTV, because I do not want my children to watch some videos... urgent please!

  • Satellite R630 - missing device PCI Windows XP driver

    Hello I lowered my Portege R630-138 of Windows 7 to Windows XP Prrofessional. I solved all the problems of bar one device driver. I have a PCI device showing in the hardware Manager that has no driver. I used all the drivers on the Toshiba site. How

  • WiFi password action camera

    I have a sony camerca action and lost the wifi password. How can I get a new password to connect the camera with the mobile and computer?

  • How can I configure Spanning Tree

    Hello I have several core Dell passes using PowerConnect 6224 s most - these ink in my Cisco provider kit. We run several VLAN and have redundant links between stacked switches. I have read up on top of the tree covering weight and have the following