Siri give wrong birthday date

Siri gives all birthdays one day soon. When someones birthday is 14 and we ask Siri when the anniversary was, siri responds that it was yesterday even though 14 is today.

Correct the info in my contacts. The time zone is THIS. (Belgium).

Advertisement

I check 6 different dates of anniversary of my contact book.
All comics before November - Siri said a day earlier. All the comics after November - Siri said a day later.
It's so strange... The time zone + 2.

Siri location checkbox is active (Preferences system - security - protection of personal information)

Important! None from my place with secret contacts in the address book.

Tags: Mac

Similar Questions

  • Why this code give me duplicate data

    HII, all the
    Why this code give me duplicate data
    SELECT (G.NAME_1 ||' '||G.NAME_2||' '||G.NAME_3||' '||G.NAME_4) AS NAME,
                  R.RES_NUM
    FROM    GUST G , RESERVATION R,ROOM_DETAILS S,ROOMS RR
    WHERE   G.RES_NUM = R.RES_NUM
    AND     R.RES_NUM = S.RES_NUM
    AND     RR.OCCUPIED = 'Y'
    RES_NUM
    --------
    1282
    1282
    1282
    1282
    1280
    1280
    1280
    1280
    1281
    1281
    1281
    1281
    1310
    1310
    1310
    1310
    
    16 rows selected

    Try this:

    SELECT DISTINCT (G.NAME_1 ||' '||G.NAME_2||' '||G.NAME_3||' '||G.NAME_4) AS NAME,
                  R.RES_NUM
    FROM    GUST G , RESERVATION R,ROOM_DETAILS S,ROOMS RR
    WHERE   G.RES_NUM = R.RES_NUM
    AND       R.RES_NUM = S.RES_NUM
    AND       RR.OCCUPIED = 'Y'
    
  • Siri gives the wrong score for liverpool game

    I asked Siri to give me the score. As you can see the printed score is 1-2 (which is correct), but Siri said that the score was tied (drawn).  What is going on?

    Seems to depend on how you ask...

  • Siri gives strange answer to my questions.

    Siri often answers a simple question with "it's an interesting question" and Siri closed.  An example of an issue that has received the answer is "Siri is there coffee shops close to home" Siri responds "is there coffee shops near you" "it's a question interesting Lisa.»  Siri then close.  It took so frustrating.  Other problems with Siri are closed when I'm in the middle of my question.  It's on again off new problem of Siri do not understand my.  I have no clue of an accent.  I asked the same questions by using the application 'Dog' and I get the answers.

    What can I do to make the Siri to get its act together?  This problem has occurred by using earlier versions of IOS.

    Thank you!

    Lisa

    I'm having the same problem on my 5 s. Siri often setincludes my voice when you ask a question and so gives me the wrong information. for example, ask Siri to call or text someone in my contacts. It started when I updated to iOS 9.3.5. Tried all sorts of things to heal a few weeks ago, but nothing helped. I dropped. It is particularly intense in the car.

    Will update to iOS by the end of the month. I want to see what else shakes with this version, until I do it.

  • 74F283 sometimes gives wrong output on digital probes

    Hello

    I have strange problems with the sensors showing the wrong exit. I am designing a CPU, and what is happening on a design more complex and now even on a simple.

    I am running:

    13.0 Multisim education Edition

    Application version: 13.0.0 (13.0.632), database version: 13.0.a

    Build date: Saturday, July 13, 2013, 19:42:19

    I'll be sure to include a copy of my simple circuit I brought back a multipage ALU 16 bits of 74F181 and 74F182 of an Adder 4 bits using a 4-bit Adder unique with fast include, 74F283.

    The installation program:

    I have 9 bits go to the entries. They are made of SPDT switches, each wired to VCC and ground, selectively.

    The first four "strands" or switches (Q, W, E, R keys) control A3... A0,

    The second of four switches (keys A, S, D, F) control B3... B0,

    The space bar control Carry-In.

    I also 3 series of XOR (74F86) switching each of the inputs and outputs on a selective basis.

    1 key allows to reverse the input bits A,

    Press 2 to reverse the B input bits,

    3 button to reverse the output bits.

    The four bits of the sum and the Carry-Out bit are each thread to their own digital logic probe (PROBE_DIG_GREEN).

    The problem:

    Exit lights are sometimes wrong, but the way that simple I know how to reproduce the bug is as follows:

    Load the file. and run the simulation.

    Press Q to switch the MSB of the seized A.

    Watch the lights of the probe. They're probably showing an inverted output.

    Press 3 to reverse the result.

    See the same lights.

    Press 3 to delete (UN-invert) exit.

    The output is corrected as it should have been from the beginning.

    Alternatively, press space to show lights crazy and 3.

    You can compare this to allowing the LSB of the input A (R key) instead of the MSB (Q key) and see how it is supposed to work.

    Why does this work? I'm doing something wrong? Is this a bug with the software? Y at - it update?

    Help, please!

    -Richard Collins

    Student in electrical and computer engineering at SUNY-IT

    Hi rich,

    I replaced your switch with a digital constant interactive, it is easier to see the digital input as the bipolar switch.  You can find this part in the in the Group of 'Sources' on the family of "Digital Sources".  Your scheme lacked a digital pattern, it most cases this affect the circuits, but from time to time, he made another, the modified file is attached.

    Also attached is an Excel file with the conditions you described and the exit, I had, I don't see a problem with the logic of the circuit. Please let me know if I'm missing something.

  • interpolate gives wrong valeursLors passage from v8.6 to v8.5

    I copied my code I built in 8.5 to 8.6. The code all works well at 8.5 but in 8.6 I found that the 1D.vi to interpolate give me false numbers of interploated values. I checked that the entries of the function are the same in both versions (8.5 and 8.6) and we checked that equality. However, the output yi is wrong to 8.6. I also checked the method of function and they are the same. No idea why this is so?

    The problem is that your berries contain NaNs. If you cut the berries before the NaNs then interpolate works correctly. I don't know what changed with the operation of interpolation 1 d table VI between 8.5 and 8.6.

  • iPhone calculator 5s gives wrong answers.

    IPhone calculator 5s gives miscalculation for the mathematics of spimple for example. I can reinstall the calculator. Thank you.

    What is the calculation you are trying to do this is incorrect? Also, please provide the steps you took to come to the answer you received. The calculator is a native application. To reinstall, you would need to restore the phone, but I would check what I asked first, and another set of eyes might be able to answer your question.

  • Satellite L10 and keyboard:-shift key gives wrong results

    Using the SHIFT key with most of other than a-z keys gives bad result.
    I tried to re - install a driver via Control Panel / keyboard with the Toshiba XP Home CD inserted but not better driver is found.
    Control Panel / regional and language setting is English UK

    Hello, Alan

    It will be nice if you can give us more information. What specific keyboard of the country you have? What you want to do exactly? Give us a few examples please.

  • I can't change the calendar events (wrong birthdays).  I have an iPhone 6 running the latest iOS

    How can I change calendar events which do not show a button "Edit"?

    Birthdays are defined in the Contacts application.

  • Siri is off, but data usage said that it has been used.

    My father was my old iPhone 4S. He is currently having problems of use of main batteries. Today at 12:55 he had 89% battery left and 5 hours later than 11%. Outside text tell me he has a problem, he has not used the phone. His use of the battery indicates that it has used 78% on Siri in the last 24 hours. However his Siri is off!

    Amy advice would be much appreciated.

    Hey there Helen.

    Welcome to Apple Support communities.

    As I understand it, there is a problem with iPhone battery life your dad 4 s, which seems to be linked to Siri. If you haven't already done so, try to restart the iPhone, as described in the article below.

    Restart your iPhone, iPad or iPod touch - Apple Support

    If the problem persists, try to restore the iPhone, as shown here:

    Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

    So long.

  • Temperature controller gives wrong powerup configuration after communicating with RS-232

    Hello

    I was working with a temperature controller Programmable of Lakeshore 330 using the LabVIEW drivers downloaded from the pilot site OR. My goal was to implement a continuous of RS232 data acquisition. I initially thought of using code similar to that used in another sensor (a pressure sensor that acquires data from RS232 continuously). Unfortunately, I kept this vi in the vi even because the I am developing. When executing the vi, I got error by the pressure transducer, which is possible because the two transducers are trying to communicate by using the same serial port. After this, my temperature Lakeshore 330 controller always turn on in a bad configuration. I can't change the input string. Also, in temperature measurement, the two numbers after that the comma is missing. For example, instead of 21.43 is just showing 21.

    Anyone know what's happened here? I restarted the Lakeshore several times, always without change. Is it possible that the command of erroneous entry on the Lake spoiled the setting somehow? It is possible to return to the original factory puts. I'm getting desperate.

    I appreciate deeply all help and suggestions.

    Thanks in advance

    Zch

    It is really not a problem of LabVIEW, but a user error.

    All I can say is that you read the manual for the controller of Lakeshore.  They are either going to have a few steps that you can use to reconfigure using the controls in the Panel before, or perhaps their own software to help set it up.  Also look at regardless of the Protocol that they use for serial communication.  Compare that to what you were trying to do with peripheral pressure can tell you how you may have accidentally changed the configuration of controllers mixed Lakeshore when you got their code and serial ports.

  • Windows Media Center: Photos are wrong / unknown Date

    Windows Media Center 12 with Windows 7.

    Displaying photos with WMC in chronological order, it shows a date of 01/09/2010.  This date is not on the information file, or within the Exchangeable Image File (EXIF) metadata format.  Whence this date?  I want to display the photos in chronological order according to the indication of date of file, such as 'Date Modified'.  There are tools out there to view and modify file dates and so dates EXIF, but I don't see whence this date 01/09/2010.  My smart TV is also picking up this date 01/09/2010 and it is why my photos are displayed out of sequence.

    I do digital images from slides using a scanner and then download on my PC.  The scanner is filling some EXIF metadata but no date.

    Whence this date?  Is he created somehow?  Is she on the Smart TV as well?

    Hello

    This can happen due to corrupt settings related to Windows Media Center. Try to repair Windows Media Center and check if it helps. Check out the link to do so:

    http://blogs.msdn.com/b/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

    Note: Please make sure you backup the registry before performing the operations from the link above.

    Please let us know if the problem still persists.

  • CanoScan 4200F gives error - "Twain data transfer error".

    I have a new Windows 7 PC and unable to use CanoScan 4200F, he returns with "Twain data transfer error".  Worked fine with Windows XP.  What should I do

    to make it work?

    Check the manufacturers technical support for latest drivers site, they have Windows 7 drivers that you can download and install. Download little correct level for your computer - 32 or 64 bit - and then install them.

    CanoScan 4200F drivers:
    http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_4200f?selectedName=DriversAndSoftware

    To see if you have Windows 7 32-bit or 64-bit:

    1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
    2. Under system, you can view the type of system, it will say 32 or 64 bits.
  • FDMEE VB API introduces not and gives "error of data access.

    Hello FDM gurus.

    While working with the FDMEE data integration tool, I had to test the capabilities of script VB to FDMEE and I tried the sample script of the ERPI Administrator's guide to copy a file from 1 place to another. Unfortunately the VB API does not work and generates an error "clsAppServerDM.fInitializeMainAPI: data access error." I don't know what am I missing here.

    Thank you in advance,

    VChakravarthy

    If you format this SQL query and you attempt to run in the SQL tool like SQL Developer, you can see how there is a SQL syntax error. There is a missing expression in the "BOLD"

    PV. LEVEL_VALUE =

      ),

    He expects something like pv. LEVEL_VALUE = 1005 so the SQL query should return the file application root.

    What I would do:

    -Update FDMEE to 11.1.2.3.510

    -Raise a SR with Oracle's Support.

    SELECT MERGE)

    SELECT pv. PROFILE_OPTION_VALUE

    AIF_PROFILE_OPTION_VALUES PV

    WHERE (PV. PROFILE_OPTION_NAME = p.PROFILE_OPTION_NAME)

    AND the pv. LEVEL_ID = 1010

    AND the pv. LEVEL_ID<=>

    AND the pv. LEVEL_VALUE = 1005

    ), (

    SELECT pv. PROFILE_OPTION_VALUE

    AIF_PROFILE_OPTION_VALUES PV

    WHERE (PV. PROFILE_OPTION_NAME = p.PROFILE_OPTION_NAME)

    AND the pv. LEVEL_ID = 1005

    AND the pv. LEVEL_ID<=>

    AND pv. LEVEL_VALUE =

      ), (

    SELECT pv. PROFILE_OPTION_VALUE

    AIF_PROFILE_OPTION_VALUES PV

    WHERE (PV. PROFILE_OPTION_NAME = p.PROFILE_OPTION_NAME)

    AND the pv. LEVEL_ID = 1000

    AND the pv. LEVEL_ID<=>

    ) PROFILE_OPTION_VALUE

    OF AIF_PROFILE_OPTIONS p

    WHERE p.PROFILE_OPTION_NAME = N 'PROFILE_APP_ROOT_DIRECTORY '.

  • Record is in sight, but select doesn't give all the data

    Hello guys!
    I have a very strange problem here, which I have already discussed for hours now. I can't find a logical explanation for the behavior.

    I have a view composed of several paintings, including one via a database link. No problems at all so far!
    A user just informed of a case where a specific record data are not displayed. Therefore, I checked the problem and discovered that the individual selection queries don't produce any result for that specific record. A query that returned a result! ;-(

    Now I checked the view and it seems perfectly fine. When you select everything from this point of view where the id is that of the problem record, all columns are returned.

    The record exists, the perspective seems to work and also updated (changed some values in a table that contains the view and the view updates immediately)-I have no idea how to solve this problem! Maybe you have an idea? First of all, I think that it is not necessary to view code view, I guess! It's long enough!

    I'd appreciate your answers and advice!

    Thousand thanks in advance!

    Sebastian

    Suppose you have the following data...

    SQL> With test_data as
      2  (
      3  SELECT 11 int_qb_nr, 12 str_gebiet, 31 str_lrt_sub, 'GEH' test_col FROM Dual
      4  UNION ALL
      5  SELECT 11,12,31, 'DEF' FROM Dual
      6  UNION ALL
      7  SELECT 11,12,31, 'ABC' FROM Dual
      8  )
      9  -- "end of test data "
     10  SELECT * FROM test_data
     11  /
    
     INT_QB_NR STR_GEBIET STR_LRT_SUB TES
    ---------- ---------- ----------- ---
            11         12          31 GEH
            11         12          31 DEF
            11         12          31 ABC  -- " I need this data to be output "
    
    3 rows selected.
    

    Your query (Simplified)

    SQL> With test_data as
      2  (
      3  SELECT 11 int_qb_nr, 12 str_gebiet, 31 str_lrt_sub, 'GEH' test_col FROM Dual
      4  UNION ALL
      5  SELECT 11,12,31, 'DEF' FROM Dual
      6  UNION ALL
      7  SELECT 11,12,31, 'ABC' FROM Dual
      8  )
      9  -- "end of test data "
     10  SELECT * FROM
     11  (SELECT int_qb_nr, str_gebiet, str_lrt_sub, test_col,
     12         ROW_NUMBER ()
     13         OVER (PARTITION BY int_qb_nr, str_gebiet, str_lrt_sub ORDER BY" int_qb_nr, "
     14        "  str_gebiet, str_lrt_sub " ) rn
     15    FROM test_data)
     16    where rn = 1
     17  /
    
     INT_QB_NR STR_GEBIET STR_LRT_SUB TES         RN
    ---------- ---------- ----------- --- ----------
            11         12          31 GEH          1
    
    1 row selected.
    
    -- " Included Double quotes to highlight  "
    

    Oracle may not assign the same number of line for several data set that occurs for the group you mentioned in the PARTITION BY Clause. (int_qb_nr, str_gebiet, str_lrt_sub). Find a way to extend your ORDER BY Clause in the ROW_NUMBER function.

    Something like the following:

    SQL> With test_data as
      2  (
      3  SELECT 11 int_qb_nr, 12 str_gebiet, 31 str_lrt_sub, 'GEH' test_col FROM Dual
      4  UNION ALL
      5  SELECT 11,12,31, 'DEF' FROM Dual
      6  UNION ALL
      7  SELECT 11,12,31, 'ABC' FROM Dual
      8  )
      9  -- "end of test data "
     10  SELECT * FROM
     11  (SELECT int_qb_nr, str_gebiet, str_lrt_sub, test_col,
     12         ROW_NUMBER ()
     13         OVER (PARTITION BY int_qb_nr, str_gebiet, str_lrt_sub ORDER BY "  int_qb_nr, "
     14       "   str_gebiet, str_lrt_sub, test_col " ) rn
     15    FROM test_data)
     16    where rn = 1
     17  /
    
     INT_QB_NR STR_GEBIET STR_LRT_SUB TES         RN
    ---------- ---------- ----------- --- ----------
            11         12          31 ABC          1
    
    1 row selected.
    
    -- " Included Double quotes to highlight "
    

    I hope this helps.

    Kind regards
    JO

Maybe you are looking for


HashFlare