Siri having problems with the connection.

Similar Questions

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• having problems with the pop-up windows of analytical Google all of a sudden and now the pages are crashing or being redirected

  original title: google analytics popups

  Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?

  Hi NicolaaTC,

  See the links below and check if it works.

  What is the browser hijacking?

  http://www.Microsoft.com/protect/terms/hijacking.aspx

   

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  Hello

  1. The issue is only with MSN mail?
  2. Have you tried using another web browser and check if you are faced with a similar question?

  Given that the problem is related to MSN I suggest you to contact MSN support for assistance.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  Check also:

  https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Hope this information is useful.

• Is anyone having problems with the last lR? I can't do to apply effects to develop at all. I have to force to leave whenever I try to use it.

  Is anyone having problems with the last LR?

  I can't do the effects to apply to develop and I have to force to leave whenever I try to use it.

  I have absolutely nothing accomplished recently - it has worked so well.

  I created enough space on my hard drive thinking that this might be a cause of slow operation but he has not made the difference...

  Hi GKVsiuals,

  suggest make you in Lightroom preferences > performance > uncheck 'use graphics processor' and restart Lightroom to check again.

• Is anyone else having problems with the crop tool in LR6.

  Is anyone else having problems with the crop tool in LR6.
  My PC crashes sometimes when I use the crop tool in LR6. It seems fairly random, and I never had this problem in LR5.

  Have you tried to disable the GPU acceleration in Lightroom preferences?

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Anyone having problems with the GENERATED_KEY in CF8 lately?

  Anyone else have problems with the GENERATED_KEY value returned by a cfquery when using ColdFusion 8 and MySQL?
  
  I'm inserting records in a MySQL 5.0 DB and then enter the result. GENERATED_KEY and assigning my ID of objects field. Nothing spectacular here.
  
  In my test harness, everything works fine but when I download files to my host I get this error;
  An error has occurred at the request:
  Error code: Server.Processing
  Details of the fault:
  Error string: cannot call CFC - element GENERATED_KEY is undefined in QCREATERESULT.
  
  I thought that there must be a bug I introduced so I check my code and ensured that it worked on my system and Uploaded the cfc again just to be sure there was nothing broken in transit.
  
  Always had problems.
  
  So, I checked the Web and found that the MySQL Connector/J version 5.1.5 has a problem with that. I contacted my provide my Site host and has asked to check the environment that I was for me.
  
  I was told it is ColdFusion 8 (as it should be.)
  
  At the beginning when I asked what version of Connector/J server on that I had used on me version 3.51. This is not a version of connector for all those of you who did not have to deal with it. (At least one that would have shipped with CF8.) That sounded more like the version of the MySQL server, but I was supposed to be on a 5.0 Server and my account information specify also the same, so I let this drop for now.
  
  After having to explain how to find a way to know what the version of the connector was attached their support they told me that it was 5.05 (has happened to the version that I already told him was the version I thought comes with CF8, if I'm wrong.)
  
  And I asked him to confirm that the DB was version 5.0.
  
  So assuming that told me the truth. I can't find a reason why the GENERATED_KEY are not returned.
  
  My CFQuery insert code looks like this;
  
  < cffunction name = "crΘer" output = "false" access = "private" returntype = 'Cancel' >
  < cfset var qCreate = "" >
  
  < cfset var local1 = Field1 () >
  < cfset var local2 = Field2 () >
  < cfset var local3 = Field3 () >
  < cfset var local4 = Field4 () >
  < cfset var local5 = Field5 () >
  < cfset var local6 = Field6 () >
  < cfset var local7 = Field7 () >
  < cfset var local8 = Field8 () >
  
  < cftransaction isolation = "read_committed" >
  < cfquery name = "qCreate" datasource = "datasource" username = "userName" password = "password" result = "qCreateResult" >
  Insert into myTable (Field1, Field2, Field3, Field4, sphere5, case Field6, Field7, Field8)
  values)
  < cfqueryparam value = "" #local1 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  < cfqueryparam value = "" #local2 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  < cfqueryparam value = "" #local3 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  "< cfqueryparam value =" "#local4 #" cfsqltype = "CF_SQL_INTEGER" = null "#iif ((local4 eq""), ("yes"), ("No.")) #" / >.
  < cfqueryparam value = "" # locale5 # "cfsqltype ="cf_sql_integer"/ >,"
  < cfqueryparam value = "" #local6 # "cfsqltype ="cf_sql_integer"/ >,"
  < cfqueryparam value = "" #local7 # "cfsqltype ="cf_sql_varchar"/ >,"
  < cfqueryparam value = "" # locale8 # "cfsqltype ="cf_sql_integer"/ >"
  )
  < / cfquery >
  < / cftransaction >
  < cfset variables.objectID = qCreateResult.GENERATED_KEY >
  < / cffunction >
  
  [No I am not really using Field1, 2, 3 in my code and my password is not actually password, but you get the point].
  
  Again, this works in my lab. (CF8, MySQL 5.0, Apache, standard Connector/j) That is what it is?
  
  Personally, I think that my environment is not what it was supposed to be regardless of what I was told. The rep that I was talking doesn't seem to know much about ColdFusion and at the end of the conversation, he said as well and opened a ticket. Not very useful, but at least not rude.
  
  However, I want to be fair and check all the possibilities. If you see something wrong with my Code let me know that I'm rather crazy eyes will then return to writing queries to get the id.
  
  Thanks in advance!
  
  -Joe
  
  PS: Just before posting this I tried to add < cfset var qCreateQuery = "" / > to the list of the variables just to see if it would change what anyone and it doesn't work. " Still works on my system, but not on them.

  Found the problem.
  The environment has been set up correctly, but the DSN apparently obtained the value a MySQL 3.51 Driver to the administrator.
  It's something that my hosting service, I have no control on however I also don't even think about asking them to check for me either. I forgot that CF has even a version 3 driver for MySQL.

  So my hats off to HostMySite technicians who concluded that, for me and for anyone having the same problem, I suggest you also check the same.

• having problems with the trash icon - documents are not deleted when deleting

  original title: problems with the trash icon

  I DELETED THE ICON TO THE TRASH BY ACCESS WHEN I PUT NOW THE TRASH DOESN'T DESSAPEAR WHEN ITS EMPTY

  Hello

  How to restore the Recycle Bin on the desktop under Vista
  http://www.Vistax64.com/tutorials/168608-Recycle-Bin-restore.html

  Hope this helps

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!