Siri Option not available
Just bought an iPad running IOS 9.2.1 3.
In the General settings, I see no Option Siri nor I see the Option dictated in the keyboard settings.
Restrictions is set to Off.
I don't know this model iPad (MD-368C/A) IS compatible with Siri.
Should Siri be downloaded and installed separately?
It is not available in all countries. Here is the list where it is available.
Export the jPeg option not available InDesign CC 2014.
Export the jPeg option not available InDesign CC 2014. Extension manager says he's here and installed but no show! any ideas?
Yep, re-installed in design CC 2014, after it has worked well.
The printer options not available when printing from Lightroom
I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800. I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.
In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer. My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled. To be exact, these options have a line through them, as if they were crossed. "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available. (See JPEG screenshot attached.)
If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:
"The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture. Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »
The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.
Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).
I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.
I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.
I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module. Can anyone throw any light on this? Any help or ideas gratefully received!
Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.
Hello! I use the latest version of iTunes and when I click file to select burn playlist cd, it is not available. I can't understand why. can someone help me? I created a playlist with all the songs I want on my cd and have tried both a right click and it does not give me the option always.
In the most recent iTunes (12.1.4), burn the dialog box works the same as it always did. You have a playlist of songs open? Have you checked that they are flammable tracks (not Apple music)?
Satellite A660 - Win 8.1 power settings option not available
I upgraded my Toshiba (A660) to 8.1 64 x. (clean install)
All if works well except idle protected function, which seem to have disappeared of power options.
In my view, that a driver is required. (I have installed a single Toshiba driver)
They don't seem to have VAP more.
Can someone tell me what is the driver I need to install for this problem?
> All works well except idle protected function, which seem to have disappeared of power options.
What exactly is the function of inactive variation? Display backlight control?
Toshiba not stand in my knowledge of Windows on the Satellite A660 8.1 and therefore you would not find drivers Windows 8.1 for this series.
If you want to install the utilities and tools Toshiba Windows 8.1, you will need to seek such software in your own hand. But I'm not quite sure if software published for other portable Toshiba would be compatible with the A660 m model.
However, the fact is that there is no such thing as the package of added value to win 8.1.
This was the case with Vista or Win 7, but it is not available for Windows 8.1.
The VAP has been replaced by the system of Toshiba driver.
Cannot change SSID on E3000 - option not available
Bought the E3000 and the ability to change the SSID is not available.
Looking at the wireless > BASIC WIRELESS SETTINGS done help button refers to being able to change the SSID here, but this option is not available.
Thanks in advance.
Figured it out.
On this page, you must change the WiFi Protected Setup manual. Allows you to change your SSID.
Vista HomePremium.SP2. Chnge workgroup option not available but may change the name of the computer. Can not enable file sharing. How Iactivate these options? Thanks in advance, Geoff
Vista Home Premium.SP2. Working Group change option is not available on the system page, but I can only change the name of the computer. Can not turn on either file sharing. How to activate these options? Thanks in advance, Geoff
1. If it is the domain controller, you cannot change the name of the computer by selecting network ID and this is normal.
2. If it is a member of the computer in domain or workgroup, you don't have permission to change the name of the computer.
See this link for more information
HP Deskjet 5100 taped in grayscale - Management Options not available in the settings of the printer color
My printer is a HP Deskjet 5100 on Mac 10.8.5. He's stuck on shades of gray, when printing. Any program I try to print in I do not get the color management option, even when checking in the advanced options.
On photoshop, he's also stuck in grayscale.
I printed a test page with success in color. But for some reason, no program will be printed in all except grayscale.
I tried to update the drivers, but the audit of Web/driver HP site, everything is up-to-date.
In the printer options, I can't even check my rate of cartridge. I have the following message: Information not available
In ColorSync Utility, under devices, it says the printer Mode is: "grey". When I try to assign a different color profile, do not.
I did a hard reset of the printer.
I removed completely and resynced the printer with the computer again in prefs/Print & analysis system
Any information would be amazing. I checked all the forums that I could find online,
Your printer is not compatible with Mountain Lion, that's why using Mac one driver generic PCL which is black & white drivers only:
Try a 3rd party like HPIJS driver, it seems your printer support and more likely to provide you with a better results than a generic driver.
Don't forget to install one of the 3 required uploads before adding to the queue printing:
HP Officejet 6000 wireless E609n double-sided printing Option not available
I have the printer above with a duplexer. There is no available duplex printing option in the print dialog box. If I open the application HP Officejet 6000 E609n, under settings > Options tab > printing HP accessory two-sided (duplexer) is not checked. When I check it, then the duplex printing option is available in the print dialog box. However, after a print job with two back, the option is no longer available for further work. Reopening of the HP Officejet 600 E609n application reveals that the two box HP-sided accessor (duplexer) printing automatically returns to the off State.
Try to restart your Mac and find any difference, also run Software Update from the Apple menu and make sure there is no HP or Apple updates available, then check any change.
If it persists, try resetting the aboid printing system any curropted configuration:
* Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
Click on the Apple menu and then click on System Preferences.
Some Printers & Scanners.
Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
Click OK to confirm the reset.
Type your user name and password.
Click OK. The printing system resets.
Manage the option not available & administrative tools not available
Using windows 7 Home Basic in my laptop. Now am not able to get to 'manage' option to right-click on 'My Computer' & when I try to access administrative tools in the control panel his watch an error as the location is not available. What should I do? Help, please.Feisal
1. What is the exact error message do you get?
2. have there been recent changes to the computer before the show?
Method 1: I suggest you of scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
Method 2: Also I suggest to open the original location administrative tools and check if the same problem persists.
"C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors."
Method 3: you can also your computer in a clean boot state and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
Import some longer Articles, smooth scrolling option not available
I am trying to import a new article which is longer that determine them the dimensions that I did before.
Ive tried to import in the same way as in the past, and the option is not available for scrolling smoothly. Thoughts?
Answered my own question. I didn't notice that I had 2 pages in the document.
Format >; align options not available in Dreamweaver 2015
I upgraded to 2015 CC, I noticed that the option to align a text is no longer available in this version, I tried the so Ctrl + shift + alt + R (or L, C), but they work do not, the format of alignment to change shortcuts is not available to affect as well. This could be a big problem for beginners like me, in previous versions I just selected some paragraphs and right-click and then automatically inserted the DIV and aligned with the text, now I have to manually insert a DIV for a specific line and give the format of each line. No idea where is the alignment option? Or how to get around this? Thank you!
No, the inspector I get has no alignment buttons, not not even the properties of police like yours, that's what I see:
You must click on CSS . properties Your screenshot shows that you are in HTML properties.
Save in png option not available
Normally - Ps CC 2014 - I can save in png or jpg. Suddenly, none of these options are available, only a limited list of formats, none of the stock image files formats. And I'm working on the same folder where I was able to do this in the past.
Help! Anyone know what is happening?
Thank you, David Allen
Ok. It's one. PNG does not save in CMYK mode (and others such as Lab) or with layers. Make sure that your document is RGB/8
If you want to keep your original file, just the menu Image > duplicate, flatten and make the mode/RGB 8 bits.
If you can create a new RGB/8 file and the png option is not there, I suspect a problem with the settings of preferences file or your installation.
Import data from the grid using Excel Option not availableOn the grid, we have the ability to import the data in grid. However, on the Import Wizard, the only option that appears is import values separated by comma (CSV). Options for importing to Excel not displayed. Why is it other import options is not available?
You may need to register the OCX that offer this feature.
You can check out a place like this OCX files:
Put the OCX files in a network location, and then put cela in a connection/GPO script or run it manually:
copy '\\somenetworklocation\jdeexpimpu\jdeexpimpU.ocx' 'C:\windows\system32\.
copy '\\somenetworklocation\jdeexpimpu\jdewebctlsU.ocx' 'C:\windows\system32\.
VT options not available in the BIOS
I have a (2342-CTO) T430 with an i7 processor - 3520M I bought in early 2013, and I loaded Virtualbox with a device. When I ran the device, it gave me an error something to the effect that virtualization is not available on my machine.
Afterwards, I went into the BIOS and found the settings for the dynamics of frequency and hyperthreading for the CPU, but I saw no entry for virtualization - any recommendations on where to find or how to activate this feature?
Good day and welcome to the community.
Take a look under the Security tab in the BIOS. "Virtualization Intel (R) technology" is currently enabled or disabled?
Maybe you are looking for
HP touchsmart laptop: laptop questions TouchSmart
Hi, I bought this during the HP touchsmart Black Friday last year laptop and I was planning on upgrading, if possible, up to 8 GB of ram and the processor, this laptop may take such upgrade safely? and if so what is the best he can manage? Thank you
The SCXI-1530/1531 devices support
Hello I found confusing information on the SCXI-1530 support software. Now it is entirely supported by the Traditioanl DAQ and DAQmx? I found that some document said that "DAQ traditional only when you are using an SCXI-1530, SCXI-1531 or SCXI-1540 d
Elvis II: FGEN, very fragmented signals low level
We recently purchased some Elvis II platforms: very beautiful products. In any case, we have a problem with ANY when the amplitude is very small (about 10 ~ 30mVpp) signal (osserved on the scope) is really fragmented. We use as input AI1 (FGEN at the
Drivers for laptop HP Pavilion 15-n055sm for Windows 7 64-bit
Reinstalled Windows XP Pro, cannot be enabled, says invalid
I need to reinstall Windows XP Pro and I have several legal copies of XP Pro, but when I put in the key code, it says that the code is not valid. What can I do?