Siri still works in the background?

Similar Questions

• "Hey Siri" still works on the LockScreen

  Why "Hey Siri" function, now tell me it cannot launch an application when the screen is locked?

  wuuzle wrote:

  Why "Hey Siri" function, now tell me it cannot launch an application when the screen is locked?

  This is part of the security.

  Can anyone say Hey Siri, launch calendar/Messages/Contacts /... to see all the private details.

• When I close thunderbird is still running in the background and always using data?

  I'm with an internet provider that has limited use of data per month. If I close Thunderbird when done using it it is still running in the background and using the data or is it closed here for not to retrieve messages or using the data?

  When you close Thunderbird, it cannot check or retrieve new messages.
  Not sure what you mean with "always running in the background.
  When you close Thunderbird is closed. Period.

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Nightly Ubuntu connects not with Ubuntu 11.10 3.0.0 - 17-generic, but firefox 11.0 kernel is still working in the same kernel version (the source of the problem since 3.0.0 - 16A gave no problem)

  Every night of Ubuntu does not connect (crashes and doesn't stop not withouyt one kill pkill or root) with Ubuntu 11.10 and the recent 3.0.0 - 17-generic kernel

  11.0 Firefox still works in the same kernel version and I use it now. The source of the problem is perhaps the core Ubuntu since 3.0.0 - 16 core gave no problem

  Hello

  Please also check if this happens in a new profile. If the new profile is correct, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings in a different location (folder profile) separated from its files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

  You may also be able to find useful info here.

• When I close firefox, it always works in the background. When I want to open it again, there is a message that firefox is running and I have to close it. then I close with CTRL + ALT + DEL/taskmanager, according to me, / all this started to happen after u

  When I close firefox, it always works in the background. When I want to open it again, there is a message that firefox is running and I have to close it. then I close with CTRL + ALT + DEL/taskmanager, according to me, /

  This has happened

  Each time Firefox opened

  == After Update/update firefox

  Perhaps, you just need to wait for a while for Firefox download.

  Perhaps, it is an extension/plugin slowing your Firefox.

  When I close Firefox in the evening, it closes slowly and uses 50% of CPU. It unloads after several (30? 60?) seconds.

• SSH still work after the change hostname?

  Hi all

  I was under the impression (from past experiences) that SSH self-signed certificates are made up of the host name and the domain name of the router.

  I worked on a network of customers and I can see that the RSA SSH certificate uses the old hostname of the device + name field but SSH works always inbound and outbound on the VTY lines!

  I thought you were to related keys and recreate it using the encryption key generate rsa command to continue using SSH after a host name changed so that the new certificate contains the new host name?

  Any explanation would be greately appreciated

  Thank you very much

  David

  Hi David.

  Yes after having modified the router setting hostname, SSH domain name will still work with the old certificate.

  What I can suggest is you to recreate through cryptographic key generate rsa command in configuration mode.

  HTH

  Concerning

  Carlo

• How the cloning process works in the background?

  VMware dear Experts,

  I want to know "How the cloning process works in the background?", according to my understanding is it works like this

  (1) instant a VM cloned

  (2) recording a virtual machine to a destination host

  (3) copy the hard of the files to a destination host

  (4) commit the Flash disk to the destination host (changed blocks r commited)

  Peut sum1 brief the cloning process...

  Concerning

  Mr. VMware

  Almost correct, step 4 the Flash disk gets committed to the VM source not destination of VM, does start with a hot-clone vCenter no change after the clone operation (i.e. the snapshot has been added to the source of the VM) will be written to the destination virtual machine.

  If you use VMware Converter, it has an option to "sync" can you consult so that it does several passes to pick up all the changes of the past during the clone operation.

  One more thing to remember it is hot-clones consistent crash so there is the possibility of losing data, although from my experience there has never been a problem.

• computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8

  computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8

  You can expect problems from not being able to install to the loss of some functionality.  the best you can do is to install using the mode of compatibility or upgrade to cs6.

• IPhoto (no pictures) will still work with the update of v10.11.6?

  I want to continue to use iPhoto because he has a few features that doesn't have pictures, so I want to make sure that iPhoto will still work if I install this update.

  As long as it is already installed, mine still works (I don't know if an installer would still work). Skip the new Photos app that will be installed if you don't want to use it.

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• Satellite P300D - CPU still works on the highest speed with XP

  Hello

  I bought a Satellite P300D with processor AMD QL. (P300D-211, PSPDCE-02K00WGR)

  For my work, I needed to install Win XP. ID installed the CPU-, chipsetdriver and energy savings, but the processor is still in the fastest speed of avaibel (2, 1 GHz). If the fan is very noisy.
  However, there is also no effect I chose in the Toshiba Power Saver the CPU speed... The CPU always runs with 2.1 GHz, even I chose the 'Step 1' fix CPU clock frequency.

  Someone at - it an idea how to fix this?

  Greatings Fabian in German

  Hello!

  Do you also have this problem with version preinstalled Windows or only with your own version of Windows XP?

  And where did you download the drivers? You should only use the drivers from the Toshiba site to ensure that everything will work on the laptop:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Check this box if you have all the drivers installed laptop you can find on the Toshiba site.

  Last but not least, I would try to update the BIOS. You can find it on the Toshiba site too.

  Good bye

• My iPhone screen 6 is black but the phone still works as the sound goes in and out. I can't restart and have tried several times and cannot reset on iTunes because need to unlock my phone.

  I dropped my phone in a short distance and when I picked it up it the screen was black. However, the sound still works as I changed the switch works for her and he made noises. I also slightly see the apple logo when I turn on my phone and you can see the switch when I try to turn it off, but it is not entirely displayed, I can't see it in very dark rooms. I tried to reset the phone several times using the Lock and Home buttons at the same time and we have tried to connect it to iTunes to reset, but it does not connect due to having unlock my phone, I can not do. Any help would be appreciated.

  Hello CaffNutt,

  Thank you for using communities of Apple Support.

  I see that you get a black on your iPhone screen, even if it is enabled. I would recommend that you take a look at the following article:

  Get help with the screen on your iPhone, iPad or iPod touch

  The first two sections seem more relevant.

  Best regards.

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• WIN8 Narrator still works in the ease of access

  Although the Narrator is supposed to be disabled (unchecked) it still works when I open ease of access.  He moves an option to option button and keep talking.  Annoys the hell outta me.  How can I disable that?  Thank you.

  It will work in the ease of access screen regardless of settings

  It is by design

  You can however he cut through voice options, setting the Volume to 0 or it cut through the Volume mixer