Siri will be is no longer read the messages without unlocking

Similar Questions

• My BDDVDRW drive will recognize is no longer read the audio CD, but both DVD and BD

  I have a HP pavilion dv6 under Windows Home Premium with a HP BDDVDRW CT40N. I have never had any problems with the optical drive. About 2 weeks ago, I started ripping of audio CD on my hard drive using Windows Media Player. I pulled about 15 CD over the 2 weeks. Then all of a sudden the drive read audio CD - I put a CD in and nothing, even after hours. If I click on the player it ejects and answers please drive inset.

  So I thought it was the CD and inserted other CD, even the ones I had just ripped - nothing. But it reads the DVD fine; I just saved a DVD with it.

  The machine is about 5 years old, but it works well, so I thought maybe it was the reader. I have another computer; It only a little more than a year, with a HL-DT-ST BDDVDRW CT40N and running Windows 10. I started to rip from CD with this computer also with Windows Media Player. Guess what - same thing.  I was able to extract only 3 CD before he showed the same symptoms: can't see CD; no problem with DVD.

  Finally, I went to my wife's computer, a different HP running Windows 7 with a DVD - RW disc. This time, think of some sort of virus or malware may be responsible, I made sure that there was no Internet (not ethernet WiFi or Bluetooth). I ripped a CD and then the same thing.

  All three computers has failed using different CD - it wasn't the same CD that was torn apart last before failure.

  I doubt very much that three different computers with different symptoms of operation and different readers might undergo the same material unusual problem in few days after execution of the software even on different CDs. There must be something about the use of this extraction software (Windows media player) or disk characteristics of driver that blocks the CD (apparently after extraction).

  I'm only moderately tech savvy, but successfully, sometimes after a considerable effort, more than anything I tried. I have had no success with this (towards even a problems prior restore point) and am at a total loss.

  Help, please.

  While they inspected, CD is not detected by the computer. You can do the following steps the solved the problem.

  1. Scan of the SFC
  • Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
  sfc/scannow

  2. run the disk check in Windows 7

  • Open the Start Menu and click on the button of the computer on the dark right side.
  • Right-click the hard disk you want to check, and then click Properties.

  3. click on the Tools tab and click the check now under error checking.

  4. you will now see this window. Follow the steps below for what you want to do.

  5. to only scan the disk for errors

  Note: This will give you just a report if there are drive errors or not and will not attempt to correct.

  • Let off both boxes, and then click the Start button. (see screenshot below step 4)

  6. only scan and try bad sectors recovery

  Note: this analysis tries to find and repair errors on the hard drive itself, physical and it may take much longer to complete.

  • Uncheck the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  7. only scan and trying to automatically fix errors

  Note: This will automatically attempt to repair problems with the files and folders that the scan detects.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Uncheck the search for and attempt recovery of bad sectors .

  8. to analyze automatically try to fix the errors and bad sectors recovery

  Note: This will scan for file errors and physical errors (steps 6 and 7). It will attempt to repair problems with the files and folders and retrieve physical errors.

  • Check the automatically fix file system errors . (see screenshot below step 4)
  • Select the search for and attempt recovery of bad sectors .

  9. Click on the Start button and is not 10 or 11 below depending on the whether the drive is currently in use or not. (see screenshot below step 4)

  10 if the selected hard drive is not in use, you will then see to check the startup disc check the disc now.

  • When the analysis is complete, you will then see
  
  results. Click close.
• Click OK. (see screenshot below step 3)
• Stop, you're done.

11. If the selected hard drive is in use, then click on the schedule the disk check button. (see screenshot below)

Note: If the hard disk that you selected in step 2 is in use (for example, the C: drive or the partition that contains Windows 7), you will be prompted to reschedule the disk check for the next time you restart your computer.

• Restart the computer.
• At startup, you have only 10 seconds to press any key to cancel the check disk of measures 7 or 8. (see screenshot below)





• Once the scan is complete you will see a report similar to this below briefly until the computer restarts automatically.



If the problem persists, you can run repair for Windows 7.

Brand of kindly as answer if that answers your query. Let us know how it goes.

Thank you.

• I want to change password if ex is unable to read the messages without using Master passworde

  Follow-up of your card. Try to change the previous password of xxxxxxxx to something my wife doesn't know. Has been advised to do so because of the coming divorce proceedings. Don't want to punch in a master password everytime I open Thunderberg. Can I change my password and how. I've been here a while try and it does not say how. Thank you

  The master password in Thunderbird protects passwords stored in Thunderbird. It prevents anyone from reading mail already downloaded on your computer.
  FYI: this is a public forum and view passwords lets everyone with your wife know what it is. Not very smart.

• In what one account all read emails disappear when I go on a different account than the back. Read all emails will appear is no longer in the Inbox or the trash.

  In what one account all read emails disappear when I go on a different account than the back. Read all emails will appear is no longer in the Inbox or the trash. Is there a setting that I don't see. Thanks Johnny1

  Try view (Alt - V) - son - everything.

• Outlook Express will launch is no longer from the desktop. Tried to download a file to reinstall Outlook Express but the error message indicating that a later version of Microsoft Explorer is installed

  Outlook Express will launch is no longer from the desktop. Tried to download a file to re install outlook express but error indicating that a later version of Microsoft Explorer is installed.

  Is there a file with Outlook Express and the appropriate version of the Explorer on which can be downloaded.

  Do I have to uninstall Explorer 8, I'm sure I do, and I would then be able to use the file? I have download a file called ie6setupOe that has been 492 kb that I thought was Outlook Express. It is a .exe Win32 Cabinet Self Extractor file

  I'm on the wrong track thinking?

  Larry

  * original title - trying to re install Outlook Express__ *.

  Bruce; Thanks for all the advice and be so useful. Now we have all this work and has not lost a large part of all that we could not re create. Larry. I voted and I hope he did publish.

• My MSN messenger no longer records the message history. It used to, but have no more. Why not?

  My MSN messenger no longer records the message history. It used to, but have no more. Why not?

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  Try this restart your iPhone, iPad or iPod touch - Apple Support

  If this does not work, it may be a hardware problem.

  Hope this helps, good luck to you.

• Cannot read the messages moved to the deleted items folder

  When I try to read the messages in the trash all that I see is at the top of a line of text. Each subsequent row has an asterisk to each end, but no text between them.

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, please Tag this thread as being for Thunderbird in the right column of this page. This issue is currently in the queue of Firefox to get answers.

• I have used IE first time in 3 years. I have READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. Failed. Ideas please.

  I have used IE first time in 3 years. When I did, I could READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. No luck.

  How can I get Firefox to DISPLAY a more clear and clean police as Word? I choose different fonts in Firefox and sizes and nothing is really happening.

  You have clearly Type is defined on your system?

  • See-> http://support.microsoft.com/kb/306527

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  Help, please!

  Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  I previously used the crd of memory and it works ok.  It also displays images must be downloaded but just let me download them.  This is the message I received:

  The following files were not imported because they could not be read. (496)

  So what I did is launching a new catalog that then wiped out all the records and traces of my previous photos!

  You talk of out of the frying pan and into the fire!  Can someone help me with this?  I have an important project to present - I'm Freelancer and looking quite the fool.

  E.

  Your old catalog is still there, use the file-> open the recent item

  The error "cannot be read" indicates that the folder where your photos are to be copied in has no WRITE permission. Change your permissions on this folder.

• I'm new to the Adobe software. I want to buy Adobe after effects CC. I want to keep it for always after compensation for her. If I pay $20 each month at the end of the year I will still be able to keep the software without paying for it again (not to ment

  I'm new to the Adobe software. I want to buy Adobe after effects CC. I want to keep it forever after that I pay for it. If I pay $20 monthly for 1 year as he says, at the end of the year I will always be able to keep the software without paying for it again (not to mention the upgrade) and use it. If this is not how to pay for it and keep it forever, and how much it will cost me?

  sirnih4l wrote:

  I'm new to the Adobe software. I want to buy Adobe after effects CC. I want to keep it forever after that I pay for it.

  Is not possible. After effects CC is the only software to subscription. You pay each month and download all the updates that are included. But you never admit it.

  If I pay $20 monthly for 1 year as he says, at the end of the year I will always be able to keep the software without paying for it again (not to mention the upgrade) and use it.

  N ° after 12 months, you either renew your subscription or you cancel your plan.

  If you choose to renew then you keep paying your monthly fees. If you choose to cancel then the software will stop working until you choose to renew.

  If this is not how to pay for it and keep it forever, and how much it will cost me?

  There is no way to buy CC pure and simple and keep it forever.

  The only version you can afford and keep it forever is CS6 (the version before CC) available here

  Creative Suite 6

• Scroll the VerticalFieldManger to see the full content of the message without losing focus on the AutoTextEditField

  I create the application such as chat window.

  I used VerticalFieldManager, AutoTextEditField and RichTextField.

  AutoTextEditField - tap the message.

  RichTextField - add the chat messages

  RichTextField is add in VerticalFieldManager.

  How to scroll the VerticalFieldManger to see the full content of the message without losing focus on the AutoTextEditField.

  Override navigationmovement. This is example how im using it.

  protected boolean navigationMovement(int dx, int dy, int status, int time)
   {
    if (dy==1)
      {
  

    int newscroll = mains.getVerticalScroll();
    int pageheigh = mains.getHeight();
      mains.setVerticalScroll(newscroll+50);
      invalidate();
    return true;  }
  

  return super.navigationMovement(dx, dy, status, time);}
  

  50. This is the step. This is very good work for me (but must create if newscroll <0 and="" if="" newscroll="">the field of cat yourmanager)

  area = VerticalFieldManager()

  Hope this makes you help.

  Best regards, Peter.

• A Web site that I use States: this agency will support is no longer using the Protocol of internet security TLS 1.0 or 1.1 - how to change this with Firefox?

  I use a site that now has the following statement:

  Safety notice: as part of our ongoing efforts to improve security, this agency will be no longer support the use of the internet security TLS 1.0 protocol effective August 1. In addition, we will also stop the support for the Security Protocol Internet TLS 1.1 on 1 September. This means you must update your browser to use this site. For any questions about the update, please consult your browser provider.

  How do I change this?

  Unless your Firefox settings have been changed, Firefox is ready for sites that use TLS 1.2, the latest version of the SSL protocol.

  For example, if you click on the Green padlock on this site, so more information, the bottom of the Panel security in the Page Info dialog box should show that the page was encrypted using TLS 1.2. I have attached a screenshot showing where to find this information.

  Can you confirm that this works?

• HP deskjet 5550 printer will print is no longer on the domestic network/work group

  I have a printer deskjet 5550 HP. It is attached through my XP operating system. My laptop is using Vista and has always been able to use this printer through the share system. However, all of a sudden the printer does not read the laptop print requests. I am able to access all other files on the main desktop. So I'm not sure what is happening. Does anyone have any suggestions?

  Hi sweetmyranda,

  1. you remember changes to the computer before the show?

  You can remove the printer in Windows Vista and then try to uninstall all the drivers for the printers of programs and features.

  Method 1:

  a. open Printers by clicking the Start button, clicking Control Panel, hardware and sound and then click Printers.

  b. right-click on the printer you want to remove, and then click on remove.

  If you can't delete the printer, right-click again, click Run as administrator, and then click on remove. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 2:

  Uninstall the printer from programs and features (as applicable).

  a. click on start

  b. type appwiz.cpl in search, and then press ENTER.

  c. find the printer driver package, right click and uninstall the package.

  d. restart the computer and check.

  Also check out the link:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.