SIT and SBRIO-9631

Hi all

I am trying to export several networks of neurons in simulink model to the SBRIO-9631. I use the simulation interface toolkit to achieve and I started with the model of the sine wave, downloaded from http://www.ni.com/white-paper/11654/en.

After the installation of the Toolbox (Windows Xp 32-bit, matlab 2011 - a 32bits, labview 2012 and 2012 SIT too), I add the path in matlab directory SIT and I start the server in matlab. I see the message about the port is started and I proceed to generate the dll. I have set up the Solver of discrete steps with a length of 0.005 and I chose the nidll_vxworks.tlc for the target system. I proceeded to build and I have this error:

I installed matlab 2008b and it works. It's strange because in the version compatibility document 2011 seems to be compatible. Anyway, with an older version works without a problem

Tags: NI Hardware

Similar Questions

  • sbRIO-9631 digital inputs/outputs using e/s node FPGAS and FPGA of i/o method node

    Hello, I'm trying to configure my SBRio-9631 for the first time.  I try to use the on boards to inputs and digital outputs.  The following code will work?  This is a simple "read the entries, 'or' some inputs and pass ' exits."  I have to add "E/s method nodes FPGA" between my 'FPGA of i/o nodes"to get"modes of State of sorting for the input and output lines?  Also, I can't simulate/test it works, by adding 5 VDC at the entrances, and not have any source of voltage output.  Thank you for your time.

    Hey, Spex,.

    I really, really appreciate your help.  Your follow up information was exceptional.

    Thanks again for your help and your time.

    gjmm

  • Deployment of casting RT VI for SBRIO-9631 does not run

    I use the following with a SBRIO-9631:

    LabVIEW 2010

    RIO 3.5.1

    VISA 5.0

    I stripped down to my program to the point... so I now have a simple communication TCP/IP RT VI which comes from the STM. I have install a real-time application generation and built the VI (RT_com_ .vi [top level]). After that I have a right-click to deploy in the 9631, in a popup, it says once he needs to restart so I click ok. So when I run the Windows host VI it should connect and get the STM meta data, but is not, and it seems that the RT VI is not running or?

    I joined the project if someone wants to beat the head with her that I am running out of ideas.

    E-mail Simple (STM) reference library I used can also be downloaded from OR to:
    http://zone.NI.com/DevZone/CDA/EPD/p/ID/2739

    I used the stm_202_installer.zip

    I thought it would be easy. Good grief! I need help.

    Pete

    I found my problem with the code.

    It turns out that the ownership of the attributes of the objects in the front should be avoided. I was using a property node to read my meta of an enum of the type defined... strict data channels beautiful methodology Windows not RT when I replaced this with an array of string constants, meta-data, I was able to control my RT application. I found the following KB document that I was led to this solution.

    http://digital.NI.com/public.nsf/allkb/E03EE22D2E50C2FD86256FD400019116

    I hope this helps someone in the future!

  • Target FPGA. help with sbrio 9631

    I am trying to connect to the analog I/o of my sbrio 9631. I'm trying to follow this video http://www.youtube.com/watch?v=q3-WGrnVnxM

    37 seconds, his project menu has two folders under the fpga target call anolg input and output analog. When I look at my project menu I don't have these files. the single folder target fpga for me is e/s on board. I use the same sbRIO as in the video. Any ideas? the attached pictures are of my project and its menu.


  • Problem of device detection via the RS232 port on sbRIO-9631

    Hello

    I can't detect a URG Hokuyo laser rangefinder - 04 LX connected to a sbRIO 9631 via the serial rs232 port. I can confirm that the rangefinder works through the computer and that it is detected by MAX and VISA when it is connected through the serial port on my computer. I have the following software downloaded on the map:

    LabVIEW time real 9.0

    Language support for LabVIEW RT 1.0.0.3

    Engine network Variable 1.6.0

    NOR-RIO 3.2.1

    NI-VISA 4.5.1

    NI-VISA Server 4.5.1

    Customer variable for LabVIEW RT 1.6.0 support

    NEITHER Max, I see under "Devices and Interfaces" in the configuration tree is the RIO0.

    TIA

    Hi oswong,

    If you install "OR Serial RT" on your sbRIO-9631, then it will allow support for the RS232 port integrated on your Single-Board RIO.

    Kind regards

  • The addition of IR sensors to sbRIO-9631.

    I have a sbRIO-9631 in the starter kit 1.0 and I try to connect the IR sensors to provide data more detailed than the sensors to ultrasound. My sentence connects to sensors. Any help is requested, I connected sensors to the Board, but I don't know if I did it correctly. If you know some tutorials that can help me, it would be greaty appreciated. the only tutorials I've found do far are what I use additional sensors for and not how to use them.

    Hello Defested,

    In the sbRIO-9631 operating instructions , that you can see on page 12, Figure 9, that the J7 connector allows you to access the analog I/o. This is where you do not use a C Series module. You can connect your sensor in several ways: CSR, NRSE and differential.

    You can see the article field wiring and considerations of noise for analog signals for more information on how to wire your sensor. We recommend to use a differential connection in case you have several sensors and are concerned about the loyalty of the signals. In the case where your sensor is a floating signal source, you would want to addition of polarization resistance of AI - AI GND.

  • I work in a wbe site and it say Blocker is on when I show it is off - why?

    I followed the instructions via the menu to activate the pop-up blockers out of a particular web site, and the system shows they are now closed but the site continues to block what I try to do and said pop up blocks are on. Why and what I can do to remove them from this site. This is a corporate site and I really need to have access to it as soon as possible.
    Thank you

    You see special icons as an icon of the pop-up block to the left or to the right end of the address bar?

    Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    Try to delete the permissions.sqlite to reset all the permissions.
    You can use this button to go to the current Firefox profile folder:

    Your security software might also block pop-ups.

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

    We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

    Why is your site, not be able to be consulted in current Firefox?

    Firefox 3.0 is now rather old and vulnerable.

    If you must use a version of Firefox 3.0.x for that one site then try the portable version of Firefox 3.0.12. English is near the bottom of the list.
    http://sourceforge.NET/projects/PortableApps/files/Mozilla Firefox 2% C Portable ed. / Mozilla Firefox Portable edition 3.0.12 %2C.

    ^ copy + paste the url above.

    Installs it portable Firefox is autonomous, that it does not touch your version of Firefox or normal profiles for her.

  • Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

    Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
    When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

    whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

    any idea?

    Thank you

    Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
    Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

  • In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

    In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
    I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
    I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
    I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

    What do you see on the page, just nothing?

    Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

    If you open a new tab, which solve this problem?

    Edit: sorry for typo's fault: browser.newtab.url

  • When I try to open CompuServe, which I used for several years on Firefox, a screen appears saying: this isn't a trusted site and it wont let me.

    When I try to open CompuServe, which I used for several years on Firefox, a screen appears saying: this isn't a trusted site and it wont let me.
    Here's what's on the screen that appears when I try to open CompuServe and AOL CompuServe of owner:
    ___________________________________________________________
    This connection is Untrusted
    You asked Firefox to connect safely to my.screenname.aol.com, but we cannot confirm that your connection is secure.
    Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
    _____________________________________________________________

    There was a security of Firefox auto update on Friday, August 7, 2015 after which this problem started to occur. On my other computer, I use very often and on which I also use Firefox, I can easily open CompuServe.

    You allowed the information to be included in the details of your system more when you posted. Look to the right of your original post, where it is said more details of the system.

  • What became of the password box / I don't see web site and saved passwords at the same time. What did you do?

    I used to be able to see the name of the web site, the user name and the password stored in the same time. now, I can see the web site and user or user and word/p but not all at the same time. How can I change it back.

    Hello peter102, you can easily resize this dialog at the bottom right...

  • When I go Incognito, is it possible that someone can keep track of Web sites and pages that I enter?

    I wonder if: when I go Incognito, is it possible that someone can keep track of Web sites and pages that I enter?

    Hi master,
    The answer to your question is Yes and no.

    None: No one can keep track of your history on the side of your computer.
    Yes: Your ISP (Internet Service Provider) can keep track of your history.

    Anyway that you do not have to worry about anyone using your computer accessing these data.

    Here's the article for help in case you want to more information: https://support.mozilla.org/en-US/kb/private-browsing-use-firefox-without-history

    I hope this helps, have a nice day.

  • Since the update to 32.0 is sit and spin when checking w / FF to see if the plugins are up to date.

    When I go to "Tools" then click on "Add-ons" and then click "Plug-Ins" and then click "Check if Plug-Ins are up-to-date", it goes to Mozilla, check your plug in Page it does sit and turning to checking on the status of your plugins with Mozilla. I use Win7 Pro and just download the update of Firefox to 32.0.

    Can now access the page to update my plugins, this problem has been resolved by Mozilla.

  • I opened a Web site and it gives a 404 error

    I opened a Web site and it gives a 404 error, the content is not loading. What should I do?

    404 error is not related to firefox. It's because of the Web site. the page you access is really absent. can be deleted by the site owner. This is why you see this error. It is not related to firefox

Maybe you are looking for