Site Recovery Manager is certified for the recovery of the database?

Similar Questions

• ORA-16783: could not resolve the deficit for the database

  I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.
  
  ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.
  
  Output of data protection
  
  DGMGRL > show detailed configuration
  
  Configuration - DRSolution
  
  Protection mode: MaxAvailability
  Databases:
  emadb - primary database
  Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
  
  emadbdg - (*) Physical standby database
  WARNING: ORA-16817: configuration not synchronized rapid failover
  
  (*) Fast failover target
  
  Properties:
  FastStartFailoverThreshold = "30"
  OperationTimeout = "30"
  FastStartFailoverLagLimit = "30"
  CommunicationTimeout = "180"
  FastStartFailoverAutoReinstate = 'TRUE '.
  FastStartFailoverPmyShutdown = "FALSE".
  BystandersFollowRoleChange = "ALL".
  
  Fast-Start Failover: ENABLED
  
  Threshold: 30 seconds
  Target: emadbdg
  Observer: emarn1
  Offset limit: 30 seconds (do not use)
  Primary closure: FALSE
  Auto-Rétablir: TRUE
  
  The configuration status:
  ERROR
  
  
  DGMGRL > see the detailed database emadb
  
  Database - emadb
  
  Role: PRIMARY
  State of destination: TRANSPORT-WE
  Occurrence (s):
  emadb
  
  Database error (s):
  ORA-16783: could not resolve the deficit for the database emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadb.
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "optional."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadbdg, emadb '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
  FastStartFailoverTarget = "emadbdg".
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadb.
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  ERROR
  
  DGMGRL > see the detailed database emadbdg
  
  Database - emadbdg
  
  Role: STANDBY PHYSICS
  State of destination: apply
  Transport delay: (unknown)
  Apply the Lag: (unknown)
  Real-time query: OFF
  Occurrence (s):
  emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadbdg".
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "OPTIONAL."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadb, emadbdg '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
  FastStartFailoverTarget = "emadb.
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadbdg".
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  WARNING
  
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL > output

  Alex Antony Samantha wrote:

  
  Head node

  SQL> archive log list
  Database log mode            Archive Mode
  Automatic archival            Enabled
  Archive destination            /opt/app/oracle/oradata/emadb/archivelog1
  Oldest online log sequence     65
  Next log sequence to archive   67
  Current log sequence            67
  
  SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
  
  THREAD# MAX(SEQUENCE#)
  ---------- --------------
        1           925
  

  It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
  When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?

  And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
  Perform the two methods.

  (1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
  (2) conduct 3-4 log switches
  (3) SQL > alter system set log_archive_dest_state_2 = 'enable '.

  and displays the alert log database and backup files.
  And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.

  second method
  (1) copy archives missing from primary sequence of 29
  (2) place manually and then perform a recovery
  or
  (3) retrieve manually

  And update with your conclusions after all these lists.
  Thank you.

• How to determine the level of Group of patches for the database Oracle EBS Server?

  Dear
  How findout patches for the database server Oracle EBS group level i.e. 10.2.0.3?
  
  Concerning

  Dear Suzy,

  I was looking for a patch of database being upgraded. After the database owner (enviroment) to supply file, I used the following command from $ORACLE_RDBMS_HOME/OPatch directory, command like $ OPatch lsinventory, he listed all the patches and updated patch also.

  'OPatch lsinventory' must list all patches applied to $RDBMS_ORACLE_HOME. For the level of database of the Group of hotfixes, you can use one of the instructions above to get the version. In addition, you can check to the BONE by running executable files (i.e. sqlplus, impdb... etc).

  And on request, I used-> -use $AD_TOP/sql/adutconf.sql , it is perfectly correct.

  Ok.

  But I can't go through of OAM,-diagnostics of Applications using, you can guide me. When I select plan of the site-diagnosis & repair - run diagnostic tests, it error. Say year error has occurred!
  Please note: you don't have sufficient privileges to perform this function.

  OAM and Diagnostics Applications are two different things.

  Diagnostics of applications can be run from "Oracle Diagnostic Tool".

  Note: 358831,1 - E-Business Suite Diagnostics run Instructions
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=358831.1

  Note: 167000.1 - Installation Guide for E-Business Suite Diagnostics
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=167000.1

  For the Group of hotfixes in OAM, follow the steps described in the following note:

  Note: 550654.1 - how to get patches Oracle Applications products in R12 group level
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550654.1

  Kind regards
  Hussein

• ashrpt - ORA-20200: samples of ASH NO exist for the DATABASE/Instance

  Hello guyes,
  
  Please could you help me with the generation of the report of ASHES? I have the stack on:
  "ORA-20200: NO samples of ASH does exist for the DATABASE Instance / '.
  
  I tried to find how to sample, but the only things I found is for statspack or awr.
  
  Thanks a lot :)

  redy007 wrote:
  sb92075:
  SYS@PMBTEST > select * from v version $;

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit version of PL/SQL Production 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Production

  The active Session history exists only in the Enterprise edition.

• password data are listed for a site, but are not used for the connection

  After updating Firefox (for 36.0.1), listed saved passwords were not being inserted to connections site. After you delete all data saved password, there is no prompt to save the entered password data. I then deleted to recycle bin signons.sqlite, logins.json and signons3.txt, you exit Firefox and hard rebooted my desktop Windows 7 Pro 64-bit computer. Still no prompt to save password entered data. Remember passwords for websites has been checked in all of this, with several attempts to uncheck, OKing, close and restart Firefox, box, OKing, restart Firefox, you log in to a site.

  Another problem is the result of the last update. I can't get my homepage to show the startup of Firefox. The box on the general tab in the Options and the home page is entered. I tried to place the home page two ways: either by manually typing the url in the Options and the other by accessing the url and drag the tab to the Home icon and say yes to make this my home page.

  Ideas for resolution of these issues would be appreciated.

  Update:
  Just got the notice of upgrade to version 37.0.2. Installed upgrading and now no problems! Hope this will help others.

  There are several reasons for something like that. But if the browser
  is now working properly, just keep an eye out for the problem to come back.

• Web site automatically resizes too large for the window of the browser without creating scrollbars.

  I recently installed FF. There is a specific Web site, I'll often that works very well in other major browsers. However, when I access it in FF, the window is displayed correctly for a split second and then re - resizes automatically to a size that does not fit within the browser window. I can't use 'CTRL -' to bring it back in full view. In addition, there is no scroll bar after resizing. I have reset FF to its default state and I restarted with modules disabled without result. This is a site based on Silverlight, if it has an impact any on the situation. Any suggestions?

  I just found a simple solution that solved my problem.

  Although CTRL + and CTRL - do not work on this Web site, I've done the bar of menus visible ("Firefox |") Options | Bar menu") and was then able to use the" View | " Zoom | Zoom out' to get the site Web fit in the browser window.

  For some reason, the site was being automatically zooms in when you access first with a new version of FF. Once I zoom out using the menu instead of CTRL-, I was able to close the browser and reopen it and it "remind" the zoom level for the site.

• Manager of photos for the Office Windows has disappeared

  Photos for the Office Manager Windows disappeared, since I signed up for a free trial of microsoft publisher 2010.  My free trial is over and now my picture Manager is missing.  Where it's going and how do I get it back?

  Well, this is what I'm talking about!  I guess I can do it this way, but it ticks me off that I can't get it back as it was...  I like to use this program to resize my photos for use on fb profiles and other.

  Thanks for your help.  not sure how I can get the viewer publisher on there that is?  What can I system restore to yesterday?

• Whenever I connect. When my home page or any site I'll is big for the screen. could if it you please let me know how I can get it back to normal size. Thank you

  the sites are great for my screen. should he return to normal.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Attachment Manager will work for the e-mail Client?

  Hello

  In my application, I work with mail attachments. So I used for this requirement, Custom Attachment Manager. But in the messages application, what that is the post is there, for those who work only Attachment Manager. So I have different e-mail accounts like gmail, yahoo mail. For those, the menu option is displayed, but it won't start my application. Because it's reching for the run method:

  public void run(Message m, SupportedAttachmentPart p)
  {
  
  }
  

  But as it isn't the Message application, it is not able to open the application. In the documentation, they mentioned that: 'the system calls this method on the thread of the application event Messages'.

  So I would like to know, whether the emails from another application is possible to open? Is there another way?

  And for parts joined, without prefix of x-rimdevice, why it doesn't work?

  If someone gives alternatives, it will be a very useful to me...

  Thank you...

  I merged your son so I can answer in one place.

  AttachmentHandler is able to access the content of attachments that have the file name prefixed with x-rimdevice and for the types that are not natively supported on the device.  This means that you cannot use this approach for .txt files, but you can create a new extension for your attachments, so they are delivered.

  Note that unless the x-rimdevice is preceded by an attachment, it is issued to the device.  The accessory remains on the box to the user mailbox and can be retrieved later by the user or by using AttachmentDownloadManager.  This was done to save bandwidth wireless.  The same process is true for you transfer messages.  When a user sends a message, attachments on the original e-mail are not sent from the device.  They pick up on the side server of the mailbox of the user.  If a user connects to a new file locally on the device, then of course that one would need to be sent from the device.  So if you read a sent, transmitted the message the accessory itself does not exist on the device.

• Cannot open my Adobe suite cS6 Master Collection. Adobe Application Manager keeps asking for the serial number.

  I've never had a problem using basic Adobe on my Mac applications. I had this installed since 2012. Last night, when I try to go to Photoshop, Premiere Pro, or one of the Adobe based products the Adobe Application Manager continues on Popping up. Telling me that the trial is finished, I had to sign up to enter my serial number or to make the Trial Version. And I went through its phases by logging provided the serial number, but unfortunately his telling me I have the wrong info set. I've never updated all Adobe based products, I was still able to use this a week before that my mac is running IOS X.

  My panic, I advanced and uninstalled all Adobe products based on my mac to start cleaning, but now that I install their back to get to the entry number series its telling me the error message even to provide the correct serial number. Can someone tell me what I else I could do, it's very discouraging to say the least.

  Cloud of reading takes up https://forums.adobe.com/thread/2089127 for some ideas

  From the above, you must disable and uninstall and run the vacuum cleaner to remove any trace

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  > downloaded each individually

  As far as I know, it will not work with a Master Collection serial number... it need to install everything and enter the serial number once for all programs

  In the end, you go in CS6 Update Manager and will find the option to tell him to NEVER check the updates and do updates once

  The information contained in my 1st answer about installing CS6 on El Capitan and assistance by an incorrect serial number message, should contribute to this point

  If not, I'm on Windows only saves links to provide assistance... I have no real experience with a Mac

• Import management develop presets for the different catalogs

  When I opened the different catalogues, it seems that some import settings are specific to this catalogue and others are applicable on any catalogue. For example, the option copy or simply add an image is specific to the catalog, but preset to develop is always used for the last import, or none if it was the option chosen.

  Is it possible to specify a different import develop preset on a basis by catalog? Also, is it possible to specify one develop different pre-set camera model (or maybe the other image attribute) in a catalog?

  My current version is the last level of update CC.

  Thank you

  Mario

  Many parameters "last use" tend to be one-by-system, not one-by-catalog.

  While I use multiple catalogs, I never count on these parameters are correct. so I always check them on the assumption that they are bad for the current circumstance.

• How to set the SGA / PGA or memory target for the database

  Hello

  We use on AIX 5.1,6.1, oracle 9i, 10g, 11g

  Currently, we manage the databases on the default memory which was chosen at the time of the creation of the databases.

  Now the application owner want to host multiple databases on the same server, so they ask the

  rough idea on the memory required for each database,

  How we calculate the amount of memory required for each database.

  Thank you

  that recommend the SGA ADVISOR?

• What method is good for the database upgrade of small size

  want to upgrade the database 10g to 11g.

  Database 10g running on server1 production wants to upgrade to another Server2 Server 11 g

  where's the good.

  -> > > > 1 upgrade can migrate 2 different server.

  -> > > > > 2 migrate then upgrade the database.

  -> > > > another question

  If am install 11g on server2 and 10g migration directly then there will be future problems on future production.

  Instead of 11.2.0.1, I would say that you use 11.2.0.4. For a 5G database, import/export is probably the best option

  HTH
  Srini

• How to free up disk space for the database file

  Hi experts BDB.

  I use bdb4.6.21 transaction Btree access method, found that after vacuum db db-> truncate, the size of the db file has changed. How to free up disk file db space? It can be configured?

  Thank you

  Min

  Hi Min,

  What Mike says is that you do not expect that the empty space after an operation of truncation (for example a delete or update that empties a page) in the database (empty pages) to return to the file system and therefore to see the physical file size decreases.

  The next section of the documentation explaining this: required disk space

  Space released by removing the key/data pairs in a Btree database or Hash is never returned in the file system, even if it is reused when possible. This means that the databases Btree and hash are to develop alone. If enough key is deleted from a database which shrinks the underlying file is desirable, use the DB-> compact() method to recover disk space. Alternatively, you can create a new database and copy the folders of the former into it.

  
  

  So, as Mike suggested, you can dump and reload the data into a new database, or copy data from the existing/old database to a new (to remove the old database and rename a new one the old name), or you can try to compact the database using the method compact().

  If you use compact(), then in order to force the return of empty for the file system pages when possible, use the DB_FREE_SPACE flag and try to avoid using an explicit transaction (use a NULL tnxid pointer, so this BDB will use internally of several transactions that will be engaged periodically to avoid locking large sections of the tree).

  When you use the compaction in order to free up space and return pages from database empty in the file system that it is generally recommended to repeat Compact with a value low 'compact_fillpercent '.  In addition, the following output statistics fields in the structure DB_COMPACT, compact_pages_truncated and compact_pages_free should be examined to determine if there is a point, continuing to run the compaction with the same compact_fillpercent.  If the values are strict positive it is then compact() calling again with the same compact_fillpercent (and specify the DB_FREE_SPACE flag).  The compact algorithm allows a single pass on the pages of the database;  pages so not empty at the end of the file will prevent the free pages (which are placed on the free list) to be returned to the file system.

  Kind regards

  Andrei

• "Backup Optimization" does not work for the "database backup"

  Hello
  
  I use a windows environment and my info from database is like this:
  

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  now I have to change my configuration for backup optimization on and then make example tablespace offline and do file sample data in offline mode. After that, I run 2 times 'Backup Database' command but 2 backup has the same size and have example tablespace too... Any backup archivelog is work bur backup database is not!
  According to this link, it does not backup datafile for the second example: http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV113
  is there something I missed?
  
  configuration of RMAN:
  

  CONFIGURE RETENTION POLICY TO REDUNDANCY 5;
  CONFIGURE BACKUP OPTIMIZATION ON;
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
  CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF;
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE COMPRESSION ALGORITHM 'HIGH' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\APP\ABC\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFORCL.ORA'; # default

  No failure, it works an expected. There is a relationship between the retention policy and the number of backups:

  RMAN only ignore backups of offline or read-only data files when there are backups n + 1, where n is the redundancy. You have of the "REDUNDANCY 5', and you will keep 6 identical backups of the offline data file.

  Werner