Site to site VPN, can ping router but not customers

I set up a site to site between an ASA5505 (company) and a router of the 871w (remote control).  The tunnel is up, and I can ping anything on the remote network business network.  However, with the passage of the company remotely, I am only able to ping the router, but no clients are connected on it.  The IP address for the router is on the same subnet as the rest of the guests (192.168.1.0/24).  I looked at the logs on the ASA5505 and it seems to be the way the traffic fine, so the problem seems to sit on the 871.  To reinforce this, to actually start the tunnel linking the corporate network using a ping to one of these customers (even if the ping command:------)

I'll be happy to provide any additional information necessary.  Thank you.

Hey Marshall.

Can you confirm for me that there is no firewall on clients that might be blocking pings? The problem description that you provided it seems that as long as the clients initiate the ping, it is successful, but the reverse is not true. This seems to indicate something about customers may be blocking traffic. Also since you say that you are able to ping the router with the ip address in the same subnet as the clients it further strengthens my conviction that the issue could be with the customers.

Kind regards

ATRI.

Tags: Cisco Security

Similar Questions

  • RV042 to RV220W VPN works... can ping IPs, but not host names

    We have an installation RV220W to the main office one-site-2 program (gateway-to-gateway) to remote desktop RV042 VPN

    RV220W has subnet 192.168.1.x (Windows 2003 server hosting DNS, DHCP)

    RV042 192.168.2.x subnet a (machine Windows 8, RV042 is hosting DNS, DHCP)

    We can ping IP numbers in both directions, but not machine names.  I know it's linked DNS are unsure which solution is.  All advice is appreciated.

    Thank you

    Lori

    Hi Lori, hostname access is generally limited to the range of local IP addresses. In addition, the router does not host a DNS record to resolve hostnames on part and other VPN respectively. You can configure the LMHOST files on each machine or you can try to use NetBios.

    You can enable NetBios on the VPN tunnel configured on each router and disable the Firewall window or make exceptions to allow NetBios traffic through the firewall of the machine.

    -Tom
    Please mark replied messages useful

  • Cisco 881 can ping internet but computers behind the router cannot

    I have a cisco 881, which can ping internet but not of any computer behind it. Computers receive a static IP address, that is why there is no DHCP assigned to any LAN interface. Here's the running configuration:

    Building configuration...

    Current configuration: 6435 bytes
    !
    ! Last modification of the configuration at 22:15:30 UTC Friday, March 11, 2016
    !
    version 15.5
    no service button
    horodateurs service debug datetime msec
    Log service timestamps datetime msec
    no password encryption service
    !
    router host name
    !
    boot-start-marker
    boot-end-marker
    !
    !
    logging buffered 51200 warnings
    !
    No aaa new-model
    BSD-client server url https://cloudsso.cisco.com/as/token.oauth2
    iomem 10 memory size
    !
    Crypto pki trustpoint TP-self-signed-76299383
    enrollment selfsigned
    name of the object cn = IOS - Self - signed - certificate - 76299383
    revocation checking no
    rsakeypair TP-self-signed-76299383
    !
    !
    TP-self-signed-76299383 crypto pki certificate chain
    certificate self-signed 01
    30820227 30820190 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
    2F312D30 2B 060355 04031324 494F532D 66 2 536967 6E65642D 43657274 53656C
    69666963 37363239 39333833 31333031 33313231 30333034 301E170D 6174652D
    5A170D32 30303130 31303030 3030305A 302F312D 302B 0603 55040313 24494F53
    2D53656C D 662 5369 676E6564 2D 436572 74696669 63617465 2 373632 39393338
    3330819F 300 D 0609 2A 864886 F70D0101 01050003 818 0030 81890281 8100B39C
    1F1F1B5A 620D3DB7 E4B82486 D8A6E928 E880F817 20D8D5D8 744 HAS 6985 B48A0AEF
    072919 6ABF6428 C 9 272B2F4E 28382554 1D1CC5CD 701F9646 38EEE5CE 67F475C4
    DD5B464B ECBD78AF A5B6B36B D2791CFE E6CB886F B030E179 7A209BC4 1CDC6BA1
    711616 C 4FD6BE16 4 489DCC5F A5EE9729 365858FD 1654EA5F 3B7F90B2 19470203
    010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 551 D 2304 0F060355
    18301680 1465D9D2 8C6F18DF 98EF832A 03DE7ADD 97301 06 03551D0E D45A6C59
    04160414 65D9D28C 6F18DF98 EF832A03 DE7ADDD4 5A6C5997 300 D 0609 2A 864886
    818100A 6 05050003 928BFD76 AEE144B3 540415EE 7DC2339D B6142CF6 F70D0101
    60E3A6DF 06DA321C B711183C 80755902 2D1D9407 857F05ED B987C08D 25002B5F
    F3C0F996 8CDA1830 3F85456B 6C6F2A4B 774B93DC 256AB90E 5A46126C C2D044DB
    3B76F1A2 0E98D2F0 A0D656CF 5031C7D7 1D9D2F88 188927 4 EEAA3915 E97C7B83
    ECF7239B 5B7F0FDD E4C9CA
    quit smoking
    !
    !
    !
    !
    !
    !
    !
    !

    !
    DHCP excluded-address IP 192.168.136.22 192.168.136.30
    DHCP excluded-address IP 192.168.131.22 192.168.131.254
    !
    IP dhcp Internet pool
    network 192.168.131.0 255.255.255.0
    DNS-server 70.28.245.227 184.151.118.254
    router by default - 192.168.131.157
    !
    !
    !
    name of the IP-server 70.28.245.227
    name of the IP-server 184.151.118.254
    IP cef
    No ipv6 cef
    !
    !
    !
    !
    !
    Authenticated MultiLink bundle-name Panel
    !
    !
    !
    !
    !
    !
    !
    !
    CTS verbose logging
    udi pid C881-K9 sn FGL1927224B standard license
    !
    !
    Archives
    The config log
    hidekeys
    username * 15 secret 5 privilege TOHi $1$ $ xwZvR0n8p6r00xE5nnBE11
    !
    !
    !
    !
    !
    !
    !
    crypto ISAKMP policy 1
    BA 3des
    preshared authentication
    Group 2
    isakmp encryption key * address 96.45.14.xx
    !
    !
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    tunnel mode
    Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
    tunnel mode
    Crypto ipsec transform-set esp-SHA2-ESP-3DES-3des esp-sha-hmac
    tunnel mode
    Crypto ipsec transform-set esp-3des SHA3-ESP-3DES esp-sha-hmac
    tunnel mode
    !
    !
    !
    map SDM_CMAP_1 1 ipsec-isakmp crypto
    Description Tunnel to96.45.14.xx
    the value of 96.45.14.xx peer
    game of transformation-ESP-3DES-SHA2
    match address 102
    !
    !
    !
    !
    !
    !
    interface FastEthernet0
    no ip address
    !
    interface FastEthernet1
    no ip address
    !
    interface FastEthernet2
    no ip address
    !
    interface FastEthernet3
    switchport access vlan 2
    no ip address
    !
    interface FastEthernet4
    port WAN Description
    DHCP IP address
    response to IP mask
    NAT outside IP
    IP virtual-reassembly in
    automatic duplex
    automatic speed
    map SDM_CMAP_1 crypto
    !
    interface Vlan1
    Description of control network
    IP 192.168.131.157 255.255.255.0
    IP access-group VLAN1_In in
    IP nat inside
    IP virtual-reassembly in
    !
    local pool IP VPN 192.168.131.152 192.168.131.155
    default IP gateway - 174.0.0.1
    IP forward-Protocol ND
    IP http server
    23 class IP http access
    local IP http authentication
    IP http secure server
    IP http timeout policy slowed down 60 life 86400 request 10000
    !
    IP high speed-flyers
    Top 10
    Sorting bytes
    !
    IP route 0.0.0.0 0.0.0.0 174.0.0.1 permanent
    !
    VLAN1_In extended IP access list
    Note the incoming traffic
    Note the category CCP_ACL = 1
    Note the crosstalk
    deny ip 192.168.135.0 0.0.0.255 192.168.130.0 0.0.1.255
    deny ip 192.168.136.0 0.0.0.255 192.168.130.0 0.0.1.255
    Note the crosstalk
    deny ip 192.168.130.0 0.0.1.255 192.168.135.0 0.0.0.255
    deny ip 192.168.130.0 0.0.1.255 192.168.136.0 0.0.0.255
    allow an ip
    VLAN1_Out extended IP access list
    Note for diagnosis
    Note the category CCP_ACL = 1
    Note Diag
    IP enable any any newspaper
    allow_all extended IP access list
    Note the category CCP_ACL = 1
    IP enable any any newspaper
    !
    !
    Note category of access list 1 = 2 CCP_ACL
    access-list 1 permit 192.168.1.0 0.0.0.255
    Note access-list category 2 CCP_ACL = 2
    access-list 2 permit 192.168.130.0 0.0.0.255
    Note access-list 100 category CCP_ACL = 4
    Note access-list 100 IPSec rule
    access-list 100 permit ip 192.168.131.0 0.0.0.255 192.168.125.0 0.0.0.255
    Note access-list 100 IPSec rule
    access-list 100 permit ip 192.168.131.0 0.0.0.255 192.168.120.0 0.0.0.255
    Note access-list 101 category CCP_ACL = 4
    Note access-list 101 IPSec rule
    access-list 101 permit ip 192.168.131.0 0.0.0.255 192.168.125.0 0.0.0.255
    Note access-list 102 CCP_ACL category = 4
    Note access-list 102 IPSec rule
    access-list 102 permit ip 192.168.131.128 0.0.0.31 192.168.125.0 0.0.0.255
    Note access-list 103 CCP_ACL category = 4
    Note access-list 103 IPSec rule
    access-list 103 allow ip 192.168.131.0 0.0.0.255 192.168.125.0 0.0.0.255
    !
    control plan
    !
    !
    !
    MGCP behavior considered range tgcp only
    MGCP comedia-role behavior no
    disable the behavior MGCP comedia-check-media-src
    disable the behavior of MGCP comedia-sdp-force
    !
    profile MGCP default
    !
    !
    !
    !
    !
    !
    !
    Line con 0
    no activation of the modem
    line to 0
    line vty 0 4
    access-class allow_all in
    access-class allow_all out
    privilege level 15
    password *.
    opening of session
    transport telnet entry
    telnet output transport
    !
    max-task-time 5000 Planner
    Scheduler allocate 20000 1000
    !
    !
    WebVPN WAN gateway
    IP address 192.168.126.9 port 44443
    redirect http port 80
    SSL trustpoint TP-self-signed-76299383
    development
    !
    WebVPN context PLC
    WAN gateway
    !
    SSL authentication check all
    development
    !
    default group policy
    functions compatible svc
    SVC-pool of addresses "VPN" netmask 255.255.255.224
    SVC Dungeon-client-installed
    generate a new key SVC new-tunnel method
    SVC split include 192.168.131.0 255.255.255.224
    mask-URL
    by default-default group policy
    !
    end

    Any ideas?

    Thank you.

    I see ip nat inside and ip nat outside interfaces configured on. But I don't see any translation of address configured. This would preclude anything inside the unit to be able to access the Internet.

    HTH

    Rick

  • Wireless laptop running Vista 32 and wired desktop under Vista 64 can access Internet, but not each other!

    My laptop Vista 32 unreal access router and ping its own IP address, but no access to Vista 64-bit Wired Office with ping or try to access folders shared I place some months ago and used without problem until about 2 days ago. I recently did a restore of the laptop but it worked after that and I adjusted all the settings. I have Net bios over TCP/IP enabled on both machines. I have two machines on the workgroup and file sharing is enabled on both. Vista 64 desktop computer can access the Internet but can not access the shared folders that I put in this PC! He cannot ping the router either but can be accessed via the routers Web page. The router is configured correctly as well. I became a master browser errors on Vista 64 desktop until I changed the registry on the laptop off car with respect to the list of servers. I'm a computer technician with networking experience, but am confused on this one. There are so many problems over there near the mine, but they usually have xp machines trying to access Vista or vice-verse. In addition, they cannot access the Internet generally. If anyone out there has any intelligent suggestions I'm desperate, but know that I have this research completely so guess I did all the basic troubleshooting to save time you and me. Thanks in advance to anyone with advice!

    Rick Saunders

    12-09-2010

    Hey thanks for getting back to me, I wanted to let you know that I could solve the problem! I'm not sure excatly what the problem was, but I went and bought a fixed register a program so that I paid for, as you no doubt know the free just ruin your machine more than it is useful, well I ran that and restarted and BOOM! Now even if I can connect to each computer and the internet. I'm still not able to ping? Now when I say that this is not so much genral, the laptop I can ping any name of site Web and number but not the PC. On the PC I can ping its own IP address but not the router or laptop? But it has no bearing on anything so I anticipate leaving me well enough alone. I how ever to download a graphics professional ping program, but not to worried about it! Thank you so much for you help and if I need more help, I hope you are avalibale!

    Rick Saunders

    The coach of the computer, LLC

  • Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

    PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

    Hello

    To help you better, please answer these questions.

    1. don't you say no Internet access in the notification bar?

    2. what diagnosis you have to run?

    3 did you do changes on the computer before the show?

    To solve your problem, try the provided items.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link:

    Troubleshooting Wizard

    Reference (my computer can not connect to Internet)

    http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

  • Laptop HP G70 connection to the router but not the internet

    I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

    It will connect to the internet ethernet of nis.

    My laptop connects fine with other networks if it is not wireless.

    All other devices are connected to the router.

    Please help this is extremely frustrating.

    You are the very welcome.

    I compressed the file and downloaded on my Skydrive account, which I shared the link below.

    Download, unzip and run the file called sp54972.

    https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

  • Outlook Express 6 problem - the Outbox can receive mail but not send Ox800CCC79 error message

    Can receive messages but not send error message Ox800CCC79

    This account has already worked? The error message indicates that you are either using Promail and attempts to send via another server, or by using another server and trying to send via Promail. Whatever it is, the error 550 is a refusal to relay messages.
     
     
     
  • Outlook Express 6 - can receive messages but not send - error number: 0x800CCC0E

    Original title: Outlook Express 6 - can receive messages but not send

    I recently installed SP3 on my Windows XP machine and installed Internet Explorer 8. After that, Outlook stopped mail (still receives, if) and gave me this error message:

    The connection to the server has failed. Account: 'mail.qmcompany.com', server: 'mail.qmcompany.com', Protocol: SMTP, Port: 587, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

    I tried everything but reinstall Outlook Express. Is there a compatibility issue with IE 8? Any help would be appreciated.

    John

    Hi John,.

    Follow the steps described in the article below

    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express (OE)

    http://support.Microsoft.com/kb/813514

    (Article applies to Outlook Express 5.5, steps applies to OE 6)

  • I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

    I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?

    It seems to work now, so if my emails get screwed up again, I'll take your advice... don't understand why he sends now and am not asking my password as it does... but I don't want to do something that I don't know if it's working now... What do you think?

  • I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

    I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

    Hi Marty_McGrath,
     
    I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.
    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue
    3. at the command prompt, the following line, and then press ENTER:
    sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

    Follow the instructions in the link below for more information on scan SFC.
    http://support.Microsoft.com/kb/936212/

    Check whether the problem is resolved.

    If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • I can't delete files to clean up existing files. I can my phone, but not my PC

    I can't delete files to clean up existing files. I can my phone, but not my PC

    Hi hugob,.

    You should still be able to delete the files in your Acrobat.com account (and receive a confirmation message "delete file" when you do. If this isn't the case, please clear the cache, and then open a session in https://cloud.acrobat.com/files. When you select a file to delete, you will see a list of options at the top of the list of files - on the far right, you will see the delete option.

    Best,

    Sara

  • Site to Site VPN - cannot ping remote subnet

    Hi all.

    I have a site to site VPN IPSEC between a 5510 (HQ) and 5505 (Remote). Everything works on the tunnel. Crypto cards and ACL is symmetrical. I see that the tunnel is in place for the required subnets. However, I can not ping of internal subnets inside 5510 to Remote LAN inside 5505 and vice versa. I have other rays VPN 5510 where I can ping within remote LAN successfully x.x.x.x. Can figure out what I'm missing. I can ping internet points, but cannot ping HQ.

    Any suggestions?

    I'm also an instant learn the ASAs, so I'm not an expert.  I know that I encouraged outside ICMP. My statement SHEEP and crypto are running off of the same group of objects that lists subnets of HQ.

    Thanks in advance.

    5505 lack the command:

    management-access inside

    Federico.

  • Why does my site display properly in Firefox but not Safari/Chrome?

    I have looked through all my code and do not understand why my previews site perfectly well in Firefox, but in Safari or Google Chrome all elements of the site work but the images that make up the background appear empty or with a blue question marks in a box on them.  I made the site by slicing layers in Photoshop then saved the HTML as a template and added the relevant divs.

    It displays a good overview on Dreamweaver as well but it is precisely these browsers on that it does not work.  It is used to preview very well on these browsers while I was doing it until I added the flash element to it, so I don't know if this has something to do with it, although all Flash elements appear and function ok.

    methumeddwl wrote:

    Thanks SnakEyes, I managed to get rid of the Alt error now.  My structure automatically becomes a tabular presentation due to the importation of the slices directly from Photoshop in a fixed layout?  All of a sudden I have all these new upcoming errors for no leftmargin, topmargin, marginWidth don't and marginheight as well as the height, so it would be ok if I just deleted all references to the latter in the code?

    Nancy Merci for these links to page layouts ready to use, they will definitely come in handy for my next site.  As I want my site to be a fixed 1024 x 700 does what a function table plan?  I want it be fixed instead of liquid that I want all the Flash animations to show in specific locations on the site.

    This is why you should not export the HTML from Photoshop.  To answer your question that exports only Photoshop like HTML 4.01, which is why he has these attributes.  In addition, everything is an image in a table cell, which leads to many problems.  Learn how to cut out pictures and use everything that CSS can offer will make better code.

  • Can connect to the wireless router, but not to the Internet

    Because I could not find this post, I published in my problem to

    Windows 7, connecting Local only, no Internet

    I think I described the problem a bit better here.

    I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

    Hello Bill6009,

    Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

    If so, try to perform a clean boot to see if you encounter the same problem.

    Please post back your results if we can help get your problem solved J

    Adam
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Can ping printer but cannot print

    Hi all
    Not sure if this is the right forum, but it is a network printer, so I thought I would try it. My apologies if it should be elsewhere.

    I have here a user who is trying to print to a printer Samsung CLX-6200 from anywhere in Windows 7 (even a test page will not work). We can see the printer, we can interact with the properties, we can ping the printer. We can do just about everything except print.

    It is not a printer problem, like others on the network successfully print on the printer. It is not a print spooler problem, because the user can print to other printers on the network successfully. I assumed it was a corrupted driver or something, however to remove and then reinstall the device at no change results. I tried to connect directly to the printer (using a TCP/IP port) and connection via the print server. No luck.

    The print job appears in the print queue but does not print and eventually fails. The print processor is Winprint, I checked the logs, but found no errors.

    A complete reinstall, which I really don't want to do in deca (the user is in a remote office) I'm out of ideas.

    The user runs Win 7-32 bit on a Dell Vostro 3550.

    The following is based on my experience with XP; I haven't done a lot of work/research on Win 7 yet so I can't tell you absolutely that it will work, but it is worth trying.

    In general, printer drivers are installed using an INF file.  However, the first time that an installation is attempted, Windows 'compile' the relevant INF file in a companion PNF file with the same name.  For subsequent installations, Windows uses the PNF file.

    If you suspect a corrupted driver and download a new one, unless you have completely removed the old driver, including his PNF file, Windows will often use the old files.  You think that you install a new driver, but you're really not.

    In Windows XP, the solution had to go on 'Server properties' in the file menu of the windows printers and faxes and delete the suspicious driver from there.  In Windows 7, it's a little more complicated:

    Control Panel > system and security > administrative tools
    Print management
    In the left pane, expand print servers > > drivers
    Select the suspicious driver in the right pane and Delete (I don't know if you have to remove the complete package 'pilot' or not, that the option was not under XP).
    Now reinstall the driver.

    If the remote user does not use a "computer administrator" account, I suspect that you may need to "Print Management" right click and select 'run as administrator '.

    P.S.: Another procedure in XP was to use cleanspl.exe to Windows 2003 (available here--> http://www.microsoft.com/en-us/download/details.aspx?id=17657) Resource Kit.  According to this Technet thread, the same tool will work in Windows 7.

Maybe you are looking for

  • Pavilion TouchSmart 14z-f000: bluetooth

    Music playback is very poor via bluetooth devices.  The music plays fine through the laptop speakers, but if I try to use my bluetooth speaker or a receiver of music sound quality is mediocre at best and the music skips.  My iPhone and iPad play well

  • Windows automatic update does not install.

    The last Windows Update Auto fails to install. I am running Windows 7 it. For these last two days the automatic Windows Update has downloaded an update when I stopped for the night. The next morning at startup it try to install the update and sits th

  • Filtering of the physical channels

    Hello I have a problem of filtering of the physical channels displayed in the drop-down list control. For example, I can not disable filtering, see below-animated gif: I have attached the VI to this post. It works as expected for you? Thank you!

  • burning dvd movies

    first computer. thought it had dvd burner. Y at - it software that I can download that allows me to burn your movies on a disc?

  • How to switch to 32 bit on 64 bit Win 7 Home

    I have a S10-3 and Win 7 Home 64-bit as one of the operating system. I saw that the Lenovo site are only 1 driver for this OS and tht is for the tv tuner card. So I want to downgrade to the 32-bit version. How can I do tht? Thank you X - jo