site to site vpn - internal network even on both sides of the tunnel
Hi all
I have the following questions about the Site Site VPN using ASA 5510 and 5505
Scenerio is
1. we have five branches & headquarters
2. we want to establish a vpn between branches & Head Office (VPN from Site to Site)
3. all branches & head office using the same internal network (192.168.150.0 255.255.255.0)
My question is
How can I configure VPN site-to-site between branches & head office with the same internal network (192.168.150.0/24)
Please help me with the configuration steps & explanation
I have experience on setting up vpn site to site between branches with differnet internal network (for example: 192.168.1.0/24 and 192.168.2.0/24)
Waiting for your valuable response
Hello
Here are a few links on policy nat
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008046f31a.shtml#T10
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807d2874.shtml
Concerning
Tags: Cisco Security
Similar Questions
-
only one statement of site-to-site VPN remote network?
Hello
I wonder on in case of site to site vpn, we can define only a single declaration of network for the Branch Office peer network?
If there is a local network to peer site, then, how to set those for the local subnet peer?
Can anyone answer my question?
Thank you.
If I understand your question, wondering how to add a different subnet to an existing site-to-site VPN tunnel?
If that is correct, you can add this network to the crypto ACL of the tunnel at a site. But you have to demolish and rebuild the tunnel before it takes effect.
Once you have added the required configuration, run the following commands to shoot down the tunnel. Do not forget that this disconnects all users on the VPN, so it is best to let users know when you go to so that they are not connected at this time here.
ISAKMP crypto claire
clear crypto ipsec his
-
How to set text in an object, so the object expands with the text and has even space on both sides of the object in illustrator cc?
R,
You can do this:
(1) create the initial direct Type;
(2) in the appearance palette dialog, click on add a new fill and define the color as you wish;
(3) effect > convert to shape > Rectangle corners round/Rectangle/Ellipse and set parent > width/extra height as you wish (essentially what needs to be added to the size of the bounding box, if anything).
After that you can change the Type and the filled area will fit as shown on the picture.
-
Hello
is it possible to install?
I have a pc and I want to connect to the Remote LAN.
PC (using vpn client) - vpn (internet)---> ROUTER1 - a vpn (MPLS network)---> ROUTER2---> SERVER site
How can I connect to a remote server? Is there an easy way?
I did the configuration of the vpn client (I can connect ROUTER1 and access a LAN via vpn with 192.168.1.x), but I can't connect to the server, even if I set the subnet (192.168.1.x) under the access list of site to site vpn (access list for traffic that must pass between ROUTER1 and ROUTER2).
Please advise! Thanks in advance.
Looks like I've not well explained.
On ROUTER1
===================
1 ACL VNC_acl is used to split tunnel, so you should include IP server_NET it NOT vpn IP pool.
2 ACL najavorbel is used to set the lan lan traffic between ROUTER1 and ROUTER2, 2 you should inlcude
IP 192.168.133.0 allow 0.0.0.255 0.0.0.255
You must change the crypto ROUTER2 ACL of the minor or the najavorbel of the ACL
The other way to is to the client VPN NAT IP to a local area network lan IP ROUTER1, in this way, you don't need any changes on ROUTER2. But I have to take a look at your configuration to make the suggestion.
-
Site to site VPN, I need all internet traffic to exit the site.
I have 2 sites connected via a pair of SRX5308
A = 192.168.1.0/24
IP WAN = 1.1.1.1
B = 192.168.2.0/24
IP WAN = 2.2.2.2
Now what I need to do, is to have all traffic from B to go to the site one even traffic destined to the internet. That is, I need internet traffic out of our network with the IP 1.1.1.1, even if it is from the network B.
On my I have set up a route 1.1.1.1 of the ISP, then a value by default 0/0 to 192.168.1.1 it ASA knows how to get to the peer VPN is a more specific route, but sends everything above the tunnel, at the remote end which then hairpin of ASA routes internet outside its own WAN port traffic.
I can understand though not how to so the same thing on the pair of SRX5308 they either don't raise the tunnel or internet route to the local site address B.
Anyone have any ideas?
I need to do this because we are logging and monitoring of internet traffic to A site via tapping from upstream to various IDS solutions and will not (cannot) reproduce this to all our remote sites.
Thank you
Dave.
After some more thought and testing I came up with a workable solution to my own problem. I'll share it here in case it can help others.
(1) use the wizard at both ends to implement a normal VPN that connects the two segments of network 192.168.1.0 and 192.168.2.0
(2) go to site VPN - VPN policy remote router192.168.2.1 and click Edit
(a) disable Netbios
(b) select "None" from the drop-down list the remote IP address.
(c) to apply the change
3) go to the VPN-> VPN policy on the head end site (192.168.1.1) and click Edit
(a) disable Netbios
(b) select "None" from the drop-down list the local IP address
(c) to apply the change
Now all the traffic wil go down the VPN tunnel and exit to the internet on the site of head end. Hope this helps others with the same question.
-
Tunnel VPN Firewall (both sides of the Site B, same IP series)
Hi Experts,
I'm in a weird situation, hope I can get an answer from you guys.
I had created VPN tunnel to our customer on our firewall 3 years.
Now we create the VPN tunnel for new customer, but the IP settings to the new customer is the same as the former client. How can we get through this that we can not change the IP settings on both clients.
Here are the technical details
Older Client settings:
(1) our authorized Local LAN IP: 192.168.3.0/24
(2) customer Local LAN IP authorized: 10.0.0.0/8 (as several range of network to the client end)
New customer to make settings:
(1) our authorized Local LAN IP: 192.168.3.0/24
(2) authorized customer Local LAN IP: 10.10.16.0/24
10.10.32.0/24
Please help as well how we can make the settings without making any changes on the client side.
I am using firewall Watchguard XTM 515
Thank you best regards &,.
Mandeep
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Tunnel from site to site VPN that overlap within the network
Hi all
I need to connect 2 networks via a tunnel VPN site to site. On the one hand, there is a 506th PIX by the termination of the VPN. The other side, I'm not too sure yet.
However, what I know, is that both sides of the tunnel using the exact same IP subnet 192.168.1.0/24.
This creates a problem when I need to define the Routing and the others when it comes to VPN and what traffic should be secure etc.
However, read a lot for the review of CERT. Adv. Cisco PIX and noticed that outside NAT can solve my 'small' problem.
That's all it is said, but I'd really like to see an example of configuration of this or hear from someone who has implemented it.
Anyone?
Steffen
How is it then?
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800949f1.shtml
-
Adding networks to the tunnel VPN ACL
Hello. On a remote location, I have to add additional networks access to our networks to the central location and I was wondering is it as simple as the addition of these networks to ACL on both sides of the tunnel to allow access or is there something more to do? I just want to be sure because it is so simple.
VPN is the site to site.
Thanks in advance for any help.
Add traffic to your acl crypto of interesting traffic and your nat exemption acl.
-
Does site to Site VPN traffic.
Hello
I had a problem with my connection to my supplier, and we can't figure it out for the life of us. We have the tunnel upward, we simply cannot ping either side of it. (as you can tell from the moment where the position, I am at a loss).
The goal is for our site to pass all traffic via the seller, so they can go out route to the internet for the rest of their network.
As I said, the tunnel is just, does not seem to be passsing no matter what traffic, or at least real traffic, I think the keep alives pass.
Hello
Some comments on configurations
Your configurations of sites on a quick glance seems fine. You have configured NAT0 for all traffic and you have set up all the traffic on the local network to connect VPN L2L.
The seller site configurations seems a little weird. Lets start with the routing. It has a route for network 10.0.0.0/8 and 10.4.0.0/16 pointing to the IP address 10.4.250.49 behind the interface 'inner' that CANNOT be the right gateway IP address as the IP 'internal' interfaces is 10.4.253.66/30, so the roads to my knowledge are useless. (IP address of the next hop must be from a directly connected network)
These are the roads
Route inside 10.0.0.0 255.0.0.0 10.4.250.49 1
Route inside 10.4.0.0 255.255.0.0 10.4.250.49 1
It's the 'inside' interface
interface GigabitEthernet0/1
No tap
Speed 1000
full duplex
nameif inside
security-level 100
IP 10.4.253.66 255.255.255.252
So with the configuration above it needs impossible even for traffic to the front between the local networks of the two sites.
If your goal is also to have passed your site outside of the site and outside traffic to the Internet through the ASA of the seller then its lack of certain configurations.
You should be at least
Global 1 interface (outside)
Since there are only "nat" statement currently sets the addresses of source for translations, but there is no "global" setting the actual address of the NAT/PAT.
The ASA of the Site of the seller is also the command lack
permit same-security-traffic intra-interface
That would allow the traffic coming through the "outside" interface (from your site through the VPN) and go through the 'outside' (your topic traffic to Internet)
-Jouni
-
I've set up a site to site VPN and I can't seem to get the VPN filter works. I've followed this document:
http://www.Cisco.com/image/gif/paws/99103/PIX-ASA-VPN-filter.PDF
I created an ACL and created an ACE with only traffic I want to allow. Then, I went to the site to site group policy and apply this filter. However, I can still ping remote network from a customer who should not be allowed. Remote network is 192.168.2.0/24.Here is my partial config:
permit Test access extended list ip 192.168.2.0 255.255.255.0 192.168.1.2 host
Trying to deny a range ip extended access listGroup Policy internal Test
Test group policy attributes
value of VPN-Filter Testtunnel-group Test_tunnel type ipsec-l2l
attributes global-tunnel-group Test_tunnel
Group Policy - by default-TestHello
First of all I would like to clarify that the group name used for one site to the other tunnel tunnel must be the ip address of the host "at least for the tunnels l2l static" it's tunnel-g were you must apply this "Test" group policy, configuring the filter seems perfect, but you must make sure that you apply the strategy of Group accordingly. Now, once you apply group policy to the correct you have to bounce the tunnel tunnel-g otherwise the new filter will not take effect, you can use the command "erase the crypto ipsec his counterpart x.x.x.x" generate some traffic and bring up the tunnel is again he should have the filter.
If you apply correctly and bounce the tunnel it will work.
You can check if the filter is applied with the command "show vpn-sessiondb detail l2l" and find the name of the ACL
Best regards, please rate.
-
Site to Site VPN problem ASA 5505
Hello
I have a strange problem with a site to site VPN. I configured it completely and I added 3 of my internal networks to be encrypted and access the remote network across the tunnel.
For some reason, I can access the remote network of only two of the three internal networkls that I've specified.
Here is a copy of my config - if anyone has any info I would be happy of course.
Thank you
Kevin
FK - U host name. S. - Raleigh - ASA
domain appdrugs.com
activate 08PI8zPL2UE41XdH encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
name Maridian-primary-Net 192.168.237.0
Meridian-backup-Net 192.168.237.128 name
name 10.239.192.141 AccessSwitch1IDFB
name 10.239.192.143 AccessSwitch1IDFC
name 10.239.192.140 AccessSwitch1MDFA
name 10.239.192.142 AccessSwitch2IDFB
name CiscoCallManager 10.195.64.206
name 10.239.192.2 CoreSwitch1
name 10.239.192.3 CoreSwitch2
name 10.195.64.17 UnityVM
name 140.239.116.162 Outside_Interface
name 65.118.69.251 Meridian-primary-VPN
name 65.123.23.194 Meridian_Backup_VPN
DNS-guard
!
interface Ethernet0/0
Shutdown
No nameif
security-level 100
no ip address
!
interface Ethernet0/1
nameif outside
security-level 60
address IP Outside_Interface 255.255.255.224
!
interface Ethernet0/2
nameif Inside1
security-level 100
IP 10.239.192.7 255.255.255.128
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 50
IP 192.168.1.1 255.255.255.0
management only
!
boot system Disk0: / asa804 - k8.bin
Disk0: / asa804.bin starting system
passive FTP mode
DNS domain-lookup outside
DNS domain-lookup Inside1
management of the DNS domain-lookup service
DNS server-group DefaultDNS
Server name 10.239.192.10
domain appdrugs.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the DM_INLINE_NETWORK_1 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.0
object-network 10.239.192.128 255.255.255.128
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
the purpose of the echo icmp message service
response to echo icmp service object
the DM_INLINE_NETWORK_2 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
the DM_INLINE_NETWORK_3 object-group network
network-object 10.195.64.0 255.255.255.192
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
the DM_INLINE_NETWORK_5 object-group network
Maridian-primary-Net network object 255.255.255.128
Meridian-backup-Net network object 255.255.255.128
the DM_INLINE_NETWORK_6 object-group network
Maridian-primary-Net network object 255.255.255.128
Meridian-backup-Net network object 255.255.255.128
object-group network Vital-network-hardware-access
host of the object-Network UnityVM
host of the CiscoCallManager object-Network
host of the object-Network AccessSwitch1MDFA
host of the object-Network AccessSwitch1IDFB
host of the object-Network AccessSwitch2IDFB
host of the object-Network AccessSwitch1IDFC
host of the object-Network CoreSwitch1
host of the object-Network CoreSwitch2
object-group service RDP - tcp
EQ port 3389 object
the DM_INLINE_NETWORK_7 object-group network
Maridian-primary-Net network object 255.255.255.128
Meridian-backup-Net network object 255.255.255.128
host of network-object Meridian-primary-VPN
host of the object-Network Meridian_Backup_VPN
the DM_INLINE_NETWORK_9 object-group network
host of the object-Network Outside_Interface
Group-object Vital-equipment-access to the network
object-group service DM_INLINE_SERVICE_2
will the service object
ESP service object
the purpose of the service ah
the eq isakmp udp service object
object-group service DM_INLINE_SERVICE_3
ICMP service object
the purpose of the echo icmp message service
response to echo icmp service object
the DM_INLINE_NETWORK_4 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
the DM_INLINE_NETWORK_8 object-group network
object-network 10.195.64.0 255.255.255.0
object-network 10.239.192.0 255.255.255.128
object-network 10.239.192.128 255.255.255.128
Outside_access_in list extended access permit icmp any any echo response
Access extensive list Maridian-primary-Net ip Outside_access_in 255.255.255.128 DM_INLINE_NETWORK_8 object-group enable
Access extensive list Meridian-backup-Net ip Outside_access_in 255.255.255.128 DM_INLINE_NETWORK_3 object-group enable
Inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.0.0.0 255.0.0.0
Access extensive list ip 10.239.192.0 Inside_nat0_outbound allow Maridian-primary-Net 255.255.255.0 255.255.255.128
Inside_access_in to access ip 10.0.0.0 scope list allow 255.0.0.0 all
Inside1_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.0.0.0 255.0.0.0
Inside1_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 Maridian-primary-Net 255.255.255.128 ip
Inside1_nat0_outbound list extended access permitted ip object-group Meridian-backup-Net DM_INLINE_NETWORK_2 255.255.255.128
Access extensive list ip 10.239.192.0 Inside1_nat0_outbound allow 255.255.255.0 10.239.199.0 255.255.255.192
Access extensive list ip 10.195.64.0 Inside1_nat0_outbound allow 255.255.255.192 10.239.199.0 255.255.255.192
Inside1_access_in to access ip 10.0.0.0 scope list allow 255.0.0.0 all
Outside_1_cryptomap list extended access allowed object-group DM_INLINE_SERVICE_1-DM_INLINE_NETWORK_1 Maridian-primary-Net 255.255.255.128 objects
Outside_2_cryptomap list extended access permitted ip object-group Meridian-backup-Net DM_INLINE_NETWORK_2 255.255.255.128
permitted access Vital-network-Access_splitTunnelAcl-list standard 10.239.192.0 255.255.255.128
permitted access Vital-network-Access_splitTunnelAcl-list standard 10.195.64.0 255.255.255.0
permitted access Vital-network-Access_splitTunnelAcl-list standard 10.239.192.128 255.255.255.128
Access extensive list ip 10.239.199.0 Vital_VPN allow 255.255.255.192 object-group Vital-equipment-access to the network
Vital_VPN list extended access allow icmp 10.239.199.0 255.255.255.192 object-group Vital-equipment-access to the network
Vital_VPN of access allowed any ip an extended list
Outside_cryptomap_1 list extended access allowed object-group DM_INLINE_NETWORK_4 Maridian-primary-Net 255.255.255.128 ip
access list Vital-Site-to-site access extended allow ip object-DM_INLINE_NETWORK_5 group Vital-network-hardware-access object
Vital-Site-to-Site-access extended access list permits object-group DM_INLINE_SERVICE_3-group of objects DM_INLINE_NETWORK_6 object-group Vital-equipment-access to the network
Vital-Site-to-Site-access extended access list permits object-group objects object-group DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_7 DM_INLINE_SERVICE_2-group
pager lines 24
Enable logging
exploitation forest asdm warnings
Outside 1500 MTU
MTU 1500 Inside1
management of MTU 1500
mask IP local pool access remote 10.239.199.11 - 10.239.199.62 255.255.255.192
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
Global (1 interface external)
NAT (Inside1) 0-list of access Inside1_nat0_outbound
NAT (Inside1) 1 10.0.0.0 255.0.0.0
Access-group Outside_access_in in interface outside
Access-group Inside1_access_in in interface Inside1
Route outside 0.0.0.0 0.0.0.0 140.239.116.161 1
Route Inside1 10.192.52.0 255.255.255.0 10.239.192.1 1
Route Inside1 10.195.64.0 255.255.240.0 10.239.192.1 1
Route Inside1 10.239.0.0 255.255.0.0 10.239.192.1 1
Route Inside1 10.239.192.0 255.255.248.0 10.239.192.1 1
Route out of the Maridian-primary-Net 255.255.255.0 Outside_Interface 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 66.104.209.192 255.255.255.224 outside
http 192.168.1.0 255.255.255.0 management
http 10.239.172.0 255.255.252.0 Inside1
SNMP-server host Inside1 10.239.132.225 community appfirestarter * #*.
location of Server SNMP Raleigh
contact Server SNMP Kevin mcdonald
Server SNMP community appfirestarter * #*.
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Server SNMP traps enable entity config change
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto Outside_map 1 corresponds to the address Outside_cryptomap_1
card crypto Outside_map 1 peer set VPN-primary-Meridian
Outside_map 1 transform-set ESP-3DES-MD5 crypto card game
card crypto Outside_map 1 defined security-association life seconds 28800
card crypto Outside_map 1 set security-association kilobytes of life 4608000
card crypto Outside_map 2 corresponds to the address Outside_2_cryptomap
card crypto Outside_map 2 set peer Meridian_Backup_VPN
map Outside_map 2 game of transformation-ESP-3DES-MD5 crypto
card crypto Outside_map 2 defined security-association life seconds 28800
card crypto Outside_map 2 set security-association kilobytes of life 4608000
card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
outside access management
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
tunnel-group-list activate
internal strategy of State civil-access to the network group
Group Policy attributes Vital access to the network
value of server DNS 10.239.192.10
value of VPN-filter Vital_VPN
Protocol-tunnel-VPN IPSec webvpn
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value vital-network-Access_splitTunnelAcl
value of remote access address pools
internal state civil-Site-to-Site-GroupPolicy group strategy
Civil-site-a-site-grouppolicy-strategie status of group attributes
value of VPN-filter Vital-Site-to-Site-access
Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
username APPRaleigh encrypted password m40Ls2r9N918trxp
username APPRaleigh attributes
VPN-group-policy Vital-network access
type of remote access service
username, password kmadmin u8urNz44/I.ugcF. encrypted privilege 15
tunnel-group 65.118.69.251 type ipsec-l2l
tunnel-group 65.118.69.251 General-attributes
Group Policy - by Defaut-vital-site-a-site-grouppolicy
IPSec-attributes tunnel-group 65.118.69.251
pre-shared-key *.
tunnel-group 65.123.23.194 type ipsec-l2l
tunnel-group 65.123.23.194 General-attributes
Group Policy - by Defaut-vital-site-a-site-grouppolicy
IPSec-attributes tunnel-group 65.123.23.194
pre-shared-key *.
remote access of type tunnel-group Vital access to the network
tunnel-group Vital access to the network general-attributes
Access to distance-address pool
Group Policy - by default-state civilian access to the network
tunnel-group Vital access to the network ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:a080b1759b57190ba65d932785ad4967
: endcan you confirm if we have the exact reflection of crypto acl at the other end
I feel may be you have a 24 10.239.192.0 255.255.255.0 on the other end in the remote network
can you please confirm that
also a reason, why you use 10.239.192.0 255.255.255.128 and 10.239.192.128 255.255.255.128 instead of 10.239.192.0 255.255.255.0
-
I have worked with establishing a VPN from Site to Site and while I can get the configuration of the tunnel and I am able to ping across the tunnel. I'm unable to use the DNS server of the remote side of the tunnel. I can ping the server and otherwise access via TCP/IP but if I try to use nslookup our ping by name he will not resolve on the configuration of IPSEC. I tried to add the domain information to the DNS of the PC configuration and then I can ping the server by name, but NSlookup is still unusable. I also tried to use the easy VPN server / method of the Client on the routers. I am able to use VPN on a PC client and initiate a connection (Internet) and I get the DNS information on the main site and all right. But by using the client to router on the other side, I can't solve DNS via the connection. Here's a brief example of Config.
Router A - Main Site
Internal network - 172.16.1.x
Router B - Site B
Internal network - 172.16.3.x
I was able to ping the subnets, but internal DNS resolution does not work for me. I can post if necessary more detailed configs.
Thank you
Dwane
I did not go to the question of having two tunnels GRE and the VPN server easy at first because I did not only and cannot say with authority that the combination works or not. My opinion is that it should work. I don't quite know which would prevent the combination of work. Perhaps someone with experience with this or someone from Cisco can talk about it.
HTH
Rick
-
OK my forehead is painful to all keyboard strokes that I know that it must be something simple, but I am brand new to the SAA. I had a site to site VPN configuration via routers 1751 that worked very well, but we're looking to add some more remote field offices, and I felt that it would be easier to maintain several sites is on the ASA 5510. I have the VPN configured on the SAA and he said that the tunnel is up. I can telnet to the ASA and ping the remote gateway on the even side of VPN and it pings fine. If I try to ping on a local computer, I get a "Request timed out". If I makes no changes apart from go to the computer room and replace the network cable the 1751 and then through the 1751 I can now ping the remote door way to my computer. The remote router works obviously very well, my statement of route on my router for vpn push through the ASA (same ip address) IP traffic that has been used by the 1751 works obviously. It seems so just like ASA is not being pushed in the ethernet0/0 VPN traffic or at least it is not encrypted. I also noticed that the ACL for NAT seems to increase in number of access either it seems, there is really just one small thing missing to make the ASA except and encrypt incoming traffic on ethernet0/0:
My network is not configured with a DMZ is something like that, the ASA ethernet0/0 and my local network on the same subnet:
Router (Cisco 2811)
|
Layer switch 2 (ProCurve)
| |
ASA5510 LAN computers
I'm trying to except both sides of the VPN in and out on Ethernet0/0 traffic I saw there was a framework for this "permit communication between VPN peers connected to the same interface' and I've activated this option.
In short, I need to understand why the VPN tunnel shows that upward and I can ping the remote of the SAA, but peripheral gateway on my network can not ping to the remote gateway through the int Ethernet0/0 on the SAA.
From the console of the ASA, I get this:
ASA5510 # ping 192.52.128.1
Send 5, echoes ICMP 100 bytes to 192.52.128.1, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 100/108/120 msASA5510 # show crypto ipsec his
Interface: *.
Tag crypto map: * _map, local addr: 10.52.120.23local ident (addr, mask, prot, port): (10.52.120.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.52.128.0/255.255.255.0/0/0)
current_peer: x.x.x.204program #pkts: 9, #pkts encrypt: 9, #pkts digest: 9
decaps #pkts: 9, #pkts decrypt: 9, #pkts check: 9
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 9, #pkts comp failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 10.52.120.23, remote Start crypto. : x.x.x.204
Path mtu 1500, fresh ipsec generals 60, media, mtu 1500
current outbound SPI: C49EF75FSAS of the esp on arrival:
SPI: 0x21FDBB9D (570276765)
transform: esp-3des esp-md5-hmac
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 1, crypto-map: * _map
calendar of his: service life remaining (KB/s) key: (3824999/3529)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC49EF75F (3298752351)
transform: esp-3des esp-md5-hmac
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 1, crypto-map: * _map
calendar of his: service life remaining (KB/s) key: (3824999/3527)
Size IV: 8 bytes
support for replay detection: YFrom my office on the 10.52.120.0 even the etherenet0/0 interface on the ASA network I get this:
C:\Users\***>ping 192.52.128.1
Ping 192.52.128.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.Ping statistics for 192.52.128.1:
Packets: Sent = 4, received = 0, lost = 4 (100% loss)C:\Users\***>ping 10.52.120.23
Ping 10.52.120.23 with 32 bytes of data:
Reply from 10.52.120.23: bytes = 32 time = 5ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 3ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255
Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255Ping statistics for 10.52.120.23:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 5ms, average = 2msCount on VPN Tunnel ACL does not increase when I try to ping the address of the remote gateway.
Here is the running of the ASA configuration:
ASA Version 7.0 (2)
names of
!
interface Ethernet0/0
nameif InsideNetwork
security-level 100
IP 10.52.120.23 255.255.255.0
!
interface Ethernet0/1
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
management only
!
activate the encrypted password of XXXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXXXXX
ciscoasa hostname
domain default.domain.invalid
passive FTP mode
permit same-security-traffic intra-interface
Access extensive list ip 10.52.120.0 InsideNetwork_nat0_outbound allow 255.255.25
5.0 192.52.128.0 255.255.255.0
Access extensive list ip 10.52.120.0 InsideNetwork_cryptomap_20 allow 255.255.255
.0 192.52.128.0 255.255.255.0
pager lines 24
asdm of logging of information
management of MTU 1500
MTU 1500 InsideNetwork
management of the interface of the monitor
the interface of the monitor InsideNetwork
ASDM image disk0: / asdm - 502.bin
don't allow no asdm history
ARP timeout 14400
NAT (InsideNetwork) 0-list of access InsideNetwork_nat0_outbound
Route InsideNetwork 0.0.0.0 0.0.0.0 10.52.120.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
http 192.168.1.0 255.255.255.0 management
http 10.52.120.0 255.255.255.0 InsideNetwork
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
card crypto InsideNetwork_map 20 corresponds to the address InsideNetwork_cryptomap_20
card crypto InsideNetwork_map 20 set peer x.x.x.204
InsideNetwork_map 20 transform-set ESP-3DES-MD5 crypto card game
InsideNetwork_map InsideNetwork crypto map interface
ISAKMP enable InsideNetwork
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
Telnet 10.52.120.0 255.255.255.0 InsideNetwork
Telnet timeout 5
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
dhcpd lease 3600
dhcpd ping_timeout 50
enable dhcpd management
tunnel-group x.x.x.204 type ipsec-l2l
x.x.x.204 group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the dns-length maximum 512
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
Cryptochecksum:7e478b60b3e406091de466675c52eaaa
: endI haven't added anything to the config except what seemed necessary to get the job of VPN tunnel. It should be fairly clean.
Thanks in advance for any help... I really hope that it is something really simple as a recruit ASA just forgot
Strange, but good news. Thanks for the update. I'm glad everything is working.
THX
MS
-
Connectivity between two site to site VPN
I have two remote sites that each connect to our main office using a site to site VPN. Remote offices have 831 routers. The main office has a PIX 515.
A remote office is 192.168.15.X and the other is 192.168.100.X. The main office is on a 10.X.X.X network.
Each remote office can contact the office with no problems. However, they cannot communicate with each other at all and I need this to work. I just want to be able to access the network 192.168.100.X network 192.168.15.X through the VPN tunnel that is already set up between each remote desktop.
I tried to add the other network to the ACL for the tunnel, but that did not work. I feel I'm missing something simple.
For example, the following ACL initially.
Note access-list 103 IPSec rule
access-list 103 allow ip 192.168.15.0 0.0.0.255 10.0.0.0 0.255.255.255
I added this line to this LIST.
access-list 103 allow ip 192.168.15.0 0.0.0.255 192.168.100.0 0.0.0.255
But that did not help.
Thanks in advance.
Hello
What code are you running on the Pix. Talk to talk IPSEC connectivity is supported only in version 7.0 and higher.
Enhanced support has spoke-to-Spoke VPN
Version 7.0 (1) improving support communications a spoke-to-spoke (customer-to-customer) VPN, providing the ability to traffic to enter and exit the same interface. In addition, remote access to splitting tunnel connections can be completed on the external interface of the security apparatus, enabling traffic destined to the Internet for remote user VPN tunnels to leave on the same interface as it happened (after that the firewall rules have been applied).
The same-security-traffic command permits traffic to enter and exit the same interface when it is used with the keyword a spoke-to-spoke VPN using intra-interface. For more information, see the section "Allows Intra-Interface traffic" in the in the command line Configuration Guide Cisco Security Appliance.
http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_70/70_rn/pix_70rn.htm#wp162358
Example of Configuration:
Let me know if it helps.
Kind regards
Arul
* Please note all useful messages *.
-
Redundancy of site to Site VPN
Hello
I have two ASA 5510 configured with tunnel from site to site. on both sides of the ASA 5510 I set up the links of redundancy (completed 2 ISP links) which works very well.
Now, I need to configure site-to-site vpn for the help link.
Please suggest me how to configure the redundancy of a site on both sites.
Kind regards
Ramanantsoa
I don't know exactly the topology of your network, but it is possible to define two peers for site-to-site VPN connection. You can do this in
toSanJose 20 ipsec-isakmp crypto map
correspondence address card crypto 20 90 toSanJose
toSanJose 20 set transformation-strong crypto card
card crypto toSanJose 20 peers set 209.165.200.229 125.126.127.22
The first pair is always given priority, in case if it is not available it failovers exchange of a second.
It will be useful.
Kind regards
Rohan
Maybe you are looking for
-
Format for writing arrays to binary files
I try to write to a binary file as a first step to understand how to work the stored formats. Currently, I have two vi, one writes a unique double in a file, and another writes a double 1 d table to a file. When I read these files in MATLAB, observin
-
HP Pavilion dv6-6153ea: can this module of RAM work in my laptop?
Hello I'm looking to upgrade the RAM in my HP Pavilion dv6-6153EA. I checked the support pages, and I opened my laptop to check if there was a spare RAM slot, and there isn't. It takes a max of 8 GB of RAM, so since I already have 4 GB can I buy a 4
-
Windows 7 has been damaged by a virus. I use Microsoft Security Essentials. My last backup would not end. When I run MSE it showed that there is a present Trojan horse. When I disconnected and restarted the cam of 5 computer messages indicating th
-
PCI input device driver not installed
need to fix code 28
-
Access list ID # on a PIX firewall
Is anyone know what of the identifier access list on a pix firewall? Standard IOS = 1-99 Extended IOS is 100-199. SW = PIX?