Site to site VPN with the VPN Client for both sites access?
Current situation:
Scenario is remote to the main office. Site IPSEC tunnel site (netscreen) remote in hand (506th pix). Cisco VPN Client of main office of remote access to users.
It's that everything works perfectly.
Problem:
Now we want remote users who connect to the seat to also be able to access resources in the remote offices.
This seems like it would be easy to implement, but I can't understand it.
Thanks in advance.
Rollo
----------
#10.10.10.0 = Network1
#10.10.11.0 = Network2
#172.16.1.0 = vpn pool
6.3 (4) version PIX
access-list 101 permit ip 10.10.10.0 255.255.255.0 172.16.1.0 255.255.255.0
access-list 101 permit ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0
splitTunnel 10.10.10.0 ip access list allow 255.255.255.0 any
splitTunnel ip 10.10.11.0 access list allow 255.255.255.0 any
access-list 115 permit ip any 172.16.1.0 255.255.255.0
access-list 116 allow ip 10.10.10.0 255.255.255.0 10.10.11.0 255.255.255.0
IP access-list 116 allow all 10.10.11.0 255.255.255.0
access-list 116 allow ip 10.10.11.0 255.255.255.0 10.10.10.0 255.255.255.0
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
IP address outside 209.x.x.x 255.255.255.224
IP address inside 10.10.10.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool 172.16.1.0 vpnpool - 172.16.1.50
Global 1 interface (outside)
Global (outside) 10 209.x.x.x 255.255.255.224
(Inside) NAT 0-list of access 101
NAT (inside) 10 10.10.10.0 255.255.255.0 0 0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 209.x.x.x 1
Timeout xlate 01:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
crypto dynamic-map Clients_VPN-dynmap 10 transform-set RIGHT
35 Myset1 ipsec-isakmp crypto map
correspondence address 35 Myset1 map cryptographic 116
card crypto Myset1 35 counterpart set x.x.x.x
card crypto Myset1 35 set transform-set Myset1
Myset1 card crypto ipsec 90-isakmp dynamic dynmap Clients_VPN
client configuration address card crypto Myset1 launch
client configuration address card crypto Myset1 answer
interface Myset1 card crypto outside
ISAKMP allows outside
ISAKMP key * address x.x.x.x 255.255.255.255 netmask No.-xauth-no-config-mode
ISAKMP identity address
ISAKMP nat-traversal 20
part of pre authentication ISAKMP policy 15
ISAKMP policy 15 3des encryption
ISAKMP policy 15 sha hash
15 1 ISAKMP policy group
ISAKMP duration strategy of life 15 28800
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 chopping sha
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 3600
part of pre authentication ISAKMP policy 25
encryption of ISAKMP policy 25
ISAKMP policy 25 md5 hash
25 2 ISAKMP policy group
ISAKMP living 25 3600 duration strategy
part of pre authentication ISAKMP policy 30
ISAKMP policy 30 aes-256 encryption
ISAKMP policy 30 sha hash
30 2 ISAKMP policy group
ISAKMP duration strategy of life 30 86400
vpngroup address vpnpool pool mygroup
vpngroup dns-server dns1 dns2 mygroup
vpngroup mygroup wins1 wins2 wins server
vpngroup mygroup by default-domain mydomain
vpngroup split splitTunnel tunnel mygroup
vpngroup idle time 64000 mygroup
mygroup vpngroup password *.
Telnet timeout 5
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Hi Rollo,
You can not be implemented for a simple reason, it is not supported on the version 6.x PIX. It relies on the PIX 7.x worm but 7.x is not supported on PIX 506. Thus, in a Word, it can be reached on a PIX 506. If you have an ASA, a PIX 515 running 7.x, a router or a hub as well, it can be reached.
HTH,
Please rate if this helps,
Kind regards
Kamal
Tags: Cisco Security
Similar Questions
-
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
Is there a 64-bit version of the VPN Client for the coming of Vista?
Is there a 64-bit version of the VPN Client for Vista to come for VPN 3000 series concentrators?
Hello
A bit is a tour here.
According to Cisco:
Install the VPN Client on a Vista 64 bit Machine will cause an error 1721
Cisco IPSec Client does not support 64-bit. If the user requires a 64-bit support, upgrade path is to use the Cisco AnyConnect VPN Client instead, that supports 64-bit. Note that the AnyConnect Client supports only SSL VPN (CSCsi26069) connections.
So if you want to go with 64-bit, you need SSL support on the VPN 3000 series and replace all IPSEC with SSL connections.
Please rate if this helped.
Kind regards
Daniel
-
What VPN Client for ASA 5550 AnyConnect Premium connection?
We have version9 a couple of ASA550 I want to put in place a VPN client for use with remote access to administration. We have included AnyConnect VPN, Premium license peers 2 so I guess we can just use of Cisco AnyConnect VPN client. I went to Cisco's Web site and it says that I don't have right to the last Anyconnect VPN Client 4.x but I don't have access to the version 3.x.
The 3.x client is compatible with the ASA and also Windows 10?
If Yes, what is the correct file to use, there are many files listed for download in AnyConnect 3.x?
In addition, what is the difference between the AnyConnect 3.x and 4.x customer and why Cisco restricting 4.x?
Jim
AnyConnect 4.x has changed the licensing model. AnyConnect 4.x licenses are term based licensing vs perpetual 3.x. There are a number of other differences, mainly due to there being only two license types - more and Apex - no Mobile plus, Advanced Endpoint Assessment, shared VPN etc. Cisco offers a nominal or no license cost of migration until the end of 2015. (depending on what you have: positive Essentials or Apex at premium)
AnyConnect 3.1 will work with Windows 10 and the latest version of the Software ASA (since Version 3.1.10010). Reference:
http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...
There are two ways it is distributed - as a stand-alone installation or package for the distribution of the ASA station. Both come in Windows, Mac OS X and Linux distributions. For a Windows client, you must use either:
AnyConnect-Win-3.1.12020-pre-deploy-K9.ISO
AnyConnect-victory - 3.1.12020 - k9.pkg
.. .to the current version of these respective form factors.
-
I've recently deployed a SonicWALL NSA2600 and have implemented a VPN site-to site both group WAN VPN that work properly. I distributed global vpn client for users who need access to network resources. However, a user uses exclusively based Apple operating systems. Y at - it a customer vpn global for Apple, or is the app of choice? If there is no other choice, this mobile app will work for a desktop Apple computer?
Thank you
Jason
This link is more accurate for MacOS.
Installation and use NetExtender on MacOS:
-
Cisco VPN Client for Windows 7 and WWAN devices
Hello
Does anyone know when Cisco will release a VPN Client for Windows 7 update that supports devices WWAN using NDIS 6.2?
Thank you
Dave,
End of the client VPN of life was announced. In my view, it is safe to say that no new features will be introduced.
AnyConnect is the way to go (Alternatively Windows 7's native IKEv2 connection works in IOS).
Marcin
-
How to fix WLM 2011 to remove emails from my hotmail server account once they have been synchronized with the WML client. ? I've seen several references in forums to an option that is located on the Advanced tab in the menu Options/Email accounts/properties, but I don't have an option in the Advanced tab in this menu. Is there another way to do it. ? I tried to do this manually, but when I manually delete a message in my Hotmail account it also deletes the message on the client when it synchronizes. I would like to have my messages stored on my customer only and not on the server. Is there a way to do this. ?
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
Create a local user with the vSphere Client
Hello
I want to create a new user with the permission of readonly. In the vmware documation salon, they say I have to go to the tab local users and groups, but there is no tab with that name.
And sorry for my English I'm not a native speaker.
Hi and welcome to communities,
This tab is visible only when you connect to the ESXi directly with the vSphere Client. You won't see when you connect to a vCenter server.
-
Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;
SE connect-VIServer esxihostname-user root - password newpasswd
This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain
y at - it something I have left out. I really appreciate any assistance that you people can provide.
Thank you, Joe
It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is. I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something. If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).
Edit:
Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it. In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access. After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access. I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.
-
5.5 beta sdk will be compatible with the web client 5.1?
Hello
We are studying options for vsphere web clinet plugin. We use the 5.1 sdk for our plugin currently. Now we continue to hear a lot of new features coming with 5.5 Sdk. So we intend to spend 5.5 sdk, visitors will also migrate to version 5.5 web client to use our plugin?
Concerning
Built with the SDK 5.1 plugins must be compatible with the Web Client 5.5. Our goal is to ensure backward compatibility for at least 1 major release.
-
I tried to download programs CC 2015 tests, but get errors. Here is the extended error message:
Exit Code: 6 Please see specific errors below for troubleshooting.
- 0 fatal error(s), 2 error(s)
Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Username\AppData\Local\Temp\{B3D7342B-FF9C-4C51-AFB3-02381D8FC254}\Illustrator_19_LS20_win64\Adobe Illustrator CC 2015\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
I the last MS C++ Redist, but is not 2012, and the executable list instructions above give me an error and ask for an annulment, which I don't think I should do. I have just upgraded to Windows 10 Home, so there may be some issues here, but I wonder if I can just download programs directly instead of via the desktop client for cc. At least that I would like to know if the installation and possibly need to adjust my redistributable c++ is really necessary.
N ° 1)
Click on the below link, Sign In and open Photoshop Elements download link.
Do not close the page, just keep it open.
https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements
Note: * If we do not keep the page of items in Photoshop, we will have access denied error message when file downloading install direct.
Then click on the link below and download the installer directly mentioned in step 2.
Step 2)
http://trials3.Adobe.com/AdobeProducts/PHSP/16/Win64/Photoshop_16_LS20_win64.7z
-
problem with the yellow triangle without preventing Internet access
problem with the yellow triangle without preventing Internet access.in across the network!
all PC go to the internet through TMG and some computers work very well and most of the computers triangle shows yellow and always go online, but the connection it needs to slow down, I do everything from restarting all switches and install new TMG and always exist and place on another line to outside the firewall problem disappear?
What can I do :(Hello
I advise you to follow the link below for Tech Net where your social networking question will be answered by IT pros.
You can post/search here
hope this helps,
B Eddie -
get the e french instead of the question mark or frame them
Emailing to my question mark and supervise the work on the first, then the small e accent when arrives to her frame them and the capital E with the accent comes for the question mark. Can you tell me what is the cause and how to fix it. Thank you.Hello
I suggest you according to the question in this forum and check if that helps:
http://windowslivehelp.com/forums.aspx?ProductID=15
It will be useful.
-
I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?
Hello
What operating system do you use?
I suggest you to follow the links and check out them.
Method 1:
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651
Method 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Can you please provide me with the part number for the screen for model #: NX. SHKAA.001 (AO1 - 131 M-C1T4)? The first ten digits of the serial number are NXSHKAA005.
Matt or gloss is what it looks like. Some like not brilliant but because most are a reflection. I would say that they would work as long as the resolution of the size and the backlight are the same.
Maybe you are looking for
-
Why is my blue tinted screen?
I've had my Apple Watch for an hour one then the screen become blue tint make me frustrated.
-
Bay of cluster fails to initialize constantly
I have a program where I have a table of cluster that enters a while loop like a shift register, and then is then indexed in a loop for to act on each item individually. To do this, the Bay of cluster must be initialized before the while loop, other
-
Download Driver b mn-510 wireless adapter?
lost cd - does anyone know where I can download the driver for this?
-
Sansa Clip and Slacker Radio?
Does anyone know if the Sansa Clip will work with Slacker Radio? Any info is appreciated!
-
LR6: files messed up after moving to EHDD, renowned images
HI: I met a very strange thing using LR6.I moved a folder containing some 7000 images in subfolders of an EHDD. Move was within LR6. It seemed to have worked very well, so does not give much time to check out all the images. Now a few weeks later I r