size of control for the time stamp

Similar Questions

• seconds of falling for the time stamp

  I guess someone has had this problem before, but do not see in the forum anywhere.  I add a timestamp in a file so I used the 'get time in seconds' and connected to a "convert to DBL.  Then this son in an indicator on the façade and in the Express VI "write to a measurement file.

  The indicator shows the time stamp very well, but in the file it puts it in scientific notation and cut the last 4 digits and fractions of a second.  Timestamping writes to the file every 5 seconds, so it is important to have the rest of the time stamp included.  I tried using probes on wires to see where things are weird but I get the same value truncated in the wire before and after the flag.  I thought it had something to do with the VI Express first, given that the indicator is fine, but with her truncated in the thread, it seems that the Express VI is indeed record exactly what is given to... but then again the indicator... you can see that I've been running in circles in this!  Someone knows the reason why he does this and a possible solution?

  Thank you very much!

  
  

• How to set parental controls for the zone

  Im trying to set up parental controls for children. I have set up for the clock, but they got smart and started to change the time zone. Does anyone know how to set up parental controls for the time zone... At least the name of the program for the time zone. Any help is appreciated, thanks.

  Im trying to set up parental controls for children. I have set up for the clock, but they got smart and started to change the time zone. Does anyone know how to set up parental controls for the time zone... At least the name of the program for the time zone. Any help is appreciated, thanks.

  If you have a superior taste of Windows 7 you can / must define the rights to change the time system and time zone via the policy editor gpedit.msc. They are defined in the strategy/Security Settings user rights assignments / Local. Ensure that only administrators and the Local Service can change these settings.

  If you have a taste less then you need to do it via a number of commands in the console, i.e.
  net localgroup
  NTRights users - r seSystemtimePrivilege-u
  NTRights u users - r seTimezonePrivilege

  You can download ntrights.exe here: http://www.microsoft.com/download/en/details.aspx?id=17657. If you choose this option, you may need to then more detailed instructions. Post again if this is the case.

  Note also that your children are more intelligent, they will find additional methods to bypass your restrictions. If you let me sit in front of your machine then I would be able to do as I please in less than five minutes, without knowing a single password. This means that you may need to solve this problem by teaching ways rather than technical.

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• triggering event for the time of day

  I'm trying to put in place a system that requires taking several samples per day at the fire time (at irregular intervals) and then repeat it every day for a week or two. So far, I have tried to use a TimeStamp control array, but I'm not getting much. Does anyone has any ideas on how to do it, or can point me to an example that I missed in my research.

  Thank you

  So what I would do, is create a loop of events with a single event - a timeout. Conduct of this event would be a picture of the time when an action should be performed. The loop starts, remove the first item and subtract the current time of the time goal. This will give you the time in seconds before the event. Multiply by 1000 to get the number of milliseconds before the time runs out. Feeding this value for the time-out. Then each timeout event fires of time, of the index to the next item and calculate a new delay.

  Mike...

• on the time stamp

  Hi guys
  
  I have a table and the date in a column value is stored in varchar2 (35)
  
  It is stored to take time up to milliseconds as below
  
  
  Select transaction_date in the table
  
  12:43:04:651 09/09/2009
  
  now, I want to vatchar2 convert timestamp data type in my table
  
  to keep the data in the sound and start with the exception of the new data according to the timestamp data type
  
  I don't know why the previous developers took varchar instead of timestamp
  
  our production server is in the United States and the data entered through the India and business also
  
  So they used the varchar data type to store the milliseconds
  Use a procedure to have time ist
  
  now I can change the timestamp data type without affecting the data
  
  I think that its really need and it is not good to store the date in varchar
  
  the procedure I know to change the data type is as below
  
  
  1. Create Table smsrec_dup as select Rowid Row_Id, transaction_date sms_rec;
  
  
  2 update sms_rec Set transaction_date = Null;
  
  
  3.commit;
  
  
  4 Alter Table sms_rec change transaction_date timestamp (3);
  
  
  5 setting a day sms_rec B Set transaction_date = (Select transaction_date of smsrec_dup A where B.Rowid = A.Row_Id);
  
  
  6.commit;
  
  
  above to change the data of TIMESTAMP type
  
  NOW, I WANT TO HOW COULD I INSERT TIME IST
  
  CURRENTLY developers use a procedure for STI
  
  AS
  
  CREATE OR REPLACE PROCEDURE current_tstamp (real out varchar2)
  AS
  var_sign varchar2 (2);
  var_zone varchar2 (35);
  time TIMESTAMP;
  
  BEGIN
  
  Select substr (systimestamp, 30.1), to_char (systimestamp, 'tzr') in var_sign, double var_zone;
  
  IF var_sign = "+" THEN
  
  IF var_zone = "+ 05:30 ' THEN"
  
  SELECT to_char (systimestamp, ' dd/mm/yyyy hh24:mi:ss:ff3 "") in the double real;
  dbms_output.put_line (actual);
  
  ON THE OTHER
  
  Select to_char (systimestamp + (1/1440 * (330-(to_number (substr (systimestamp, 31,2)) * 60 +))))
  TO_NUMBER (substr (systimestamp, 34.2))), "dd/mm/yyyy hh24:mi:ss")
  ||':'||
  TO_CHAR (systimestamp, 'ff3'),
  SYSTIMESTAMP
  real-time,.
  Double;
  
  dbms_output.put_line (actual);
  
  END IF;
  
  ON THE OTHER
  
  Select
  to_char(SYSTIMESTAMP +)
  (1/1440 *)
  (to_number (substr (systimestamp, 31.2)) * 60 +)
  TO_NUMBER (substr (systimestamp, 34.2)) + 330)), "dd/mm/yyyy hh24:mi:ss")
  ||':'||
  TO_CHAR (systimestamp, 'ff3'),
  SYSTIMESTAMP
  real-time,.
  Double;
  
  dbms_output.put_line (actual);
  
  END IF;
  
  END;
  /
  
  
  and to call that trigger in
  
  as
  CREATE OR REPLACE TRIGGER 'TEST'.trg_tctn_dtinsrt_sms
  BEFORE INSERT ON sms_received
  FOR EACH LINE
  DECLARE
  VARCHAR2 (55) DT;
  BEGIN
  current_tstamp (DT);
  : new.transaction_date: = DT;
  END;

  Hello

  I just want to explain about this a bit...

  change time zone at the database level is quite a bad idea...
  because if you change the time zone then what about all the data that might be present in the same database used by other applications, as appropriate.
  I'm not sure, but if dbtimezone is changed so if you have date or timestamp columns with tables so the values inside of get them adjusted to the time zone has changed.

  first of all understand the diff between...

  If you use systimestamp (which is not really a timestamp data type appear perfectly what timestamp with time zone) must always dbtimezone time zone (as obtained from timezone database).

  You use localtimestamp (which is a timestamp data type) if the timestamp at the session that you set for him. by default, it will take the client's time zone.

  If you use current_timestamp (which is a local timestamp with time zone data type), we have to the time stamp and the time zone at the session that you define for him...

  SQL> alter session set time_zone='+05:30'
    2  ;
  
  Session altered.
  
  SQL>  select systimestamp,current_timestamp,localtimestamp from dual;
  
  SYSTIMESTAMP
  ---------------------------------------------------------------------------
  CURRENT_TIMESTAMP
  ---------------------------------------------------------------------------
  LOCALTIMESTAMP
  ---------------------------------------------------------------------------
  10-SEP-09 05.15.03.531687 AM -04:00
  10-SEP-09 02.45.03.531716 PM +05:30
  10-SEP-09 02.45.03.531716 PM
  
  SQL> alter session set time_zone='+04:30';
  
  Session altered.
  
  SQL> select systimestamp,current_timestamp,localtimestamp from dual;
  
  SYSTIMESTAMP
  ---------------------------------------------------------------------------
  CURRENT_TIMESTAMP
  ---------------------------------------------------------------------------
  LOCALTIMESTAMP
  ---------------------------------------------------------------------------
  10-SEP-09 05.15.39.840319 AM -04:00
  10-SEP-09 01.45.39.840350 PM +04:30
  10-SEP-09 01.45.39.840350 PM
  

  See above see you systimestamp does not change but current_timestamp and localtimestamp change with session timestamp...

  Until this is localtimestamp... speak frankly... it will get the time stamp of the client... If you use a sql developer then it will show the timestamp on your desktop... But in a 3-tier application... I mean applicationlayer-customer data base, the database client is application layer not the end user PC. He will get the time zone of the server application. So using timestamp with local time zone can be waived if you use 2-tier application or desktop.

  Here's the real story...
  So what I mean is that... This is the application layer send the time zone of the client to the database... If the database when inserting (indirectly, your willingness to insert queries) convert the timestamp to whatever you want...

  for example...
  I am inserting a record into the database table that has a timestamp data type... so... I inserted at 14:56 IST

  SQL> insert into test_tz(col1) values(systimestamp);
  
  1 row created.
  
  SQL> select col1 from test_tz;
  
  COL1
  ---------------------------------------------------------------------------
  10-SEP-09 05.25.41.497759 AM
  
  SQL> 
  

  If you see he showed he showed the time server by deleting the part of zone. Since then, you would like to insert in the TSI data then...

  SQL> truncate table test_Tz;
  
  Table truncated.
  
  SQL>  insert into test_tz(col1) values(systimestamp at time zone 'Asia/Calcutta');
  
  1 row created.
  
  SQL> select col1 from test_tz;
  
  COL1
  ---------------------------------------------------------------------------
  10-SEP-09 02.59.57.087032 PM
  

  He showed the real time of the insert as IST.

  .....................................
  If you want to set the level of the session then you must use localtimestamp as you used in your post...

  But regardless of how you use... you must spend the time zone of the client to the server, I mean 5:30 ' or "Asia/Calcutta" whatever inside your sql queries.

  Ravi Kumar

• How can I set the default font size and type for the outgoing Hotmail mail?

  How can I set the default font size and type for the outgoing Hotmail mail?

  Hi Dale,

  What is the email client do you use?

  Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.

  I hope this helps.

• Name of the table to query for the time window of work

  I am trying to build a query for a list of jobs in tide. Anyone know what table is for the time window? Please notify. Thank you.

  Hi Warren, according to me, this is the jobdtl table.

  jobdtl_fromtm and jobdtl_untiltm

• Option-click for the clone stamp does not. I've tried several suggested fixes, no results. Help!

  Howdy!

  I searched and found similar questions on the forum and I tried all the solutions proposed, that I could find, but I'm still not resolve this issue. Hoping that maybe someone found a fix!

  The problem is that the option - click to set a point source for the Clone Stamp tool does not work, but the behavior seems to be particularly odd.

  With the Clone Stamp selected, tool if I press the option key pressed, I get the crosshairs target little, which makes me think that Photoshop is the option key is read and is not a recovery program of her clutter. When I then try to use the clone stamp, however, I get the dreaded error message:

  "Could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)."

  I went through all the relevant troubleshooting steps, I could find elsewhere on the forum. I have updated to the latest version of Photoshop and my BONES. I tried to reset the tool. When this does not work, I reset the Photoshop preferences. I have disabled all the other programs that seemed that they might have some sort of overlay keyboard shortcut, but as mentioned, Photoshop DO change the cursor when I press the option key, which makes me think (although I am far from being an expect) is not the issue. I have no plugins or mods or anything of this nature that is installed. It is a completely vanilla installation.

  I am under Photoshop CC 2015.1.2 20160113.r.355 x 64.  My OS is El Capitan 10.11.2.

  Any help would be greatly appreciated. As far as I know, there is no work around. This tool is dead in the water for me until I can sort this out.

  Thank you!

  -Dom

  P.S. If this is quite in the wrong place to post a question like that, I'm sorry. I would like to know where I lead and I'll be on my way!

  I have to admit, I'm puzzled. Everything seems as it should. The tool has been reset, preferences reset and the layer looks very good. I wonder if it is a question with El Capitan. I use Windows, but know that Photoshop has had problems when El Capitan came out. If you have not used the clone 6 months stamp then it would have been pre - El Capitan. Have you tried completely uninstalling Photoshop, restart the computer and reinstall?

  I have not followed the El Capitan saga, you can read about it here

  Warning about Mac OS X 10.11 El Capitan

  As a last resort, you can try going back to Yosemite.

  Terri

• I bought and installed Photoshop elements 13. The program does not open says bur I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time and I have

  I bought and installed Photoshop elements 13. The program does not open but says I have to register on my Adobe ID that I have. Then, I get a box saying I'm not online or my computor clock is out of adjustment. The clock is correct for the time being, and I am on the line what should I do?

  See the link below:

  Photoshop elements 13 - can't get a response code in the offline activation method

  Re: I have uploaded a second copy of Acrobat Pro DC to my PC. By clicking on the icon gives your computer is offline or your computer's clock is set incorrectly?

• tests of the device for the time of the ASM and Network Protocol (NTP)

  Hi all.
  I try to install Infratruction grid Oracle 11 g R2 amd oracle Linux OS but
  I got the following error.
  
  tests of the device for the time of the ASM and Network Protocol (NTP)
  can someone guide me what should I do for them?

  in RAC 11 GR 2, the option to synchronize the time between the nodes are ntp or ctss.

  If you want to use ntp add the - x option in/etc/sysconfig/ntpd (for example OPTIONS = "-u ntp:ntp Pei /var/run/ntpd.pid x")

  Hope this helps

• problem with the customization of the menu bar for the time of execution...!

  I have created a user interface and want to give all selectable options to the user through cutomized launch time menu bar. However, I am facing a problem with that:

  If I click on any menu item in the bar, I'm not able to choose another option until the first is finished. For example, control of the execution of a test sure if I give 'run' and 'pause' of the goods covered by 'test' in the menu bar and click 'Run', the control does not return to the menu bar to choose the other option ("pause" in this case) until execution of receives test it more. Making 'pause' option useless. Is there a way to fix this?

  Fix is the example.

• Frequency of calls to control for the FPGA read/write

  Hello

  I use a cRIO-9076 with a module NI 9476 DO spend some faucets. It is sometimes necessary for faucets with a pulse time down to a few ms of impulse.

  The FPGA VI Gets the power tap queries, executes a logic of security, and routes the numerical results for the exits. It gets applications power of the VI on RT target that uses the function ' Read/write FPGA control' interaction programming of the FPGA VI front. The loop on the RT runs with 1 kHz, no iteration is missed. That means, it should be possible to switch the valves with a resolution of 1 ms.

  What I see on an oscilloscope, is that the output digital are high for multiples of 50 ms, the system does not reach the valve for example 80 ms pulse or pulses shorter than Ms. 50 is a kind of limitation for calls of "FPGA read/write control"? I tried both options for arbitration, but it does not help.

  The best knowledge of the limiting cRIO/module/features or ideas? Thank you in advance.

  Karsten

  Hi Karsten

  You use any time in your FPGA VI?

  It is useful to your code by sending as an attachment so that I can have a look.

  Kind regards

• use the time stamp value find value Y in another waveform

  Hello, there, I'm using labview 2013 sp1. I'm sorry that I can't use a picture to describe the problem.

  The wizard sampling DAQ 2 waveforms of 2 channels to HAVE

  Want to use mounted on board one of the waveforms as the triger to get the value of Y to another waveform (as was done with an oscilloscope)

  I tried method 2:

  1. the useto separate a waveform to and use to get the time of adjustments

  2. always use

  and use to get the timestamp.

  are - this method works?

  the problem is how can I use the value of time I've learned very well the value of Y in other waveforms?

  Thank you much in advance.

  I'm sorry you use screw Express, and I'm even more sorry that you are using the dynamic data type.  Using these are not your fault, it's that NEITHER recommend for new developers, but you tend to not have as much control then you type using more stringent data and write the code yourself.

  Using Split signals you can withdraw all of your signals since the type of dynamics and process data of each.  Don't know why you would use signals select but which, in my opinion, they do the same thing.  Then, you use DDT to to get your data into a format that is more useful.  Select the Conversion of a single waveform.  The explanation I gave in my previous post is valid.

  Joined a VI that does what you want.  You can see that once you have a waveform and its components, you can do a much better job.  Like finding the Min and Max of a wave by using table functions.  It searches the first place where AI0 went above your trigger and then gets the value that AI1 was at this same level, which will be at roughly the same time.  Don't forget not that served it one after the other, so no two samples will be taken at the same exact time for most of the DAQ cards.  Few are simultaneous sampling.

• Field validation text for the time format

  Hi all

  I have been breaking my head for almost 2 weeks, but am not able to figure it out... Please help me solve the riddle... here, it will:

  In a text field, I want to perform an operation in the following way:

  > a text default to 00:00:00 is defined at the moment as the text field is for the moment and the length in characters of the field is 8.

  > if the cursor is in position 0 (zero) and if I press a number of key it should replace the value of the 0 position and move the cursor to the next position.

  for example: 00:00:00

  20:00

  explanation : now the cursor is in position 0 and I press the 2 key it should replace the value 0 in position 0 and den move the cursor on the position 1 ie. next position...

  When I press a button not digital it shouldn't replace the value, but the slider should move to the next position.

  This seems to work ok. You need to test more, however. I've added a few properties for the hours, minutes and seconds as well.

  import java.util.regex.Pattern;
  
  import javafx.application.Application;
  import javafx.beans.binding.Bindings;
  import javafx.beans.binding.IntegerBinding;
  import javafx.beans.property.ReadOnlyIntegerProperty;
  import javafx.beans.property.ReadOnlyIntegerWrapper;
  import javafx.geometry.Insets;
  import javafx.scene.Scene;
  import javafx.scene.control.IndexRange;
  import javafx.scene.control.Label;
  import javafx.scene.control.TextField;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class TimeTextFieldTest extends Application {
  
   @Override
    public void start(Stage primaryStage) {
    VBox root = new VBox(5);
    root.setPadding(new Insets(5));
    Label hrLabel = new Label();
    Label minLabel = new Label();
    Label secLabel = new Label();
    TimeTextField timeTextField = new TimeTextField();
    hrLabel.textProperty().bind(Bindings.format("Hours: %d", timeTextField.hoursProperty()));
    minLabel.textProperty().bind(Bindings.format("Minutes: %d", timeTextField.minutesProperty()));
    secLabel.textProperty().bind(Bindings.format("Seconds: %d", timeTextField.secondsProperty()));
  
    root.getChildren().addAll(timeTextField, hrLabel, minLabel, secLabel);
    Scene scene = new Scene(root);
    primaryStage.setScene(scene);
    primaryStage.show();
    }
  
    public static void main(String[] args) {
    launch(args);
  
    }
  
    public static class TimeTextField extends TextField {
  
      enum Unit {HOURS, MINUTES, SECONDS};
  
      private final Pattern timePattern ;
      private final ReadOnlyIntegerWrapper hours ;
      private final ReadOnlyIntegerWrapper minutes ;
      private final ReadOnlyIntegerWrapper seconds ;
  
      public TimeTextField() {
        this("00:00:00");
      }
      public TimeTextField(String time) {
        super(time);
        timePattern = Pattern.compile("\\d\\d:\\d\\d:\\d\\d");
        if (! validate(time)) {
          throw new IllegalArgumentException("Invalid time: "+time);
        }
        hours = new ReadOnlyIntegerWrapper(this, "hours");
        minutes = new ReadOnlyIntegerWrapper(this, "minutes");
        seconds = new ReadOnlyIntegerWrapper(this, "seconds");
        hours.bind(new TimeTextField.TimeUnitBinding(Unit.HOURS));
        minutes.bind(new TimeTextField.TimeUnitBinding(Unit.MINUTES));
        seconds.bind(new TimeTextField.TimeUnitBinding(Unit.SECONDS));
      }
  
      public ReadOnlyIntegerProperty hoursProperty() {
        return hours.getReadOnlyProperty();
      }
  
      public int getHours() {
        return hours.get() ;
      }
  
      public ReadOnlyIntegerProperty minutesProperty() {
        return minutes.getReadOnlyProperty();
      }
  
      public int getMinutes() {
        return minutes.get();
      }
  
      public ReadOnlyIntegerProperty secondsProperty() {
        return seconds.getReadOnlyProperty();
      }
  
      public int getSeconds() {
        return seconds.get();
      }
  
      @Override
      public void appendText(String text) {
        // Ignore this. Our text is always 8 characters long, we cannot append anything
      }
  
      @Override
      public boolean deleteNextChar() {
  
        boolean success = false ;
  
        // If there's a selection, delete it:
        final IndexRange selection = getSelection();
        if (selection.getLength()>0) {
          int selectionEnd = selection.getEnd();
          this.deleteText(selection);
          this.positionCaret(selectionEnd);
          success = true ;
        } else {
          // If the caret preceeds a digit, replace that digit with a zero and move the caret forward. Else just move the caret forward.
        int caret = this.getCaretPosition();
        if (caret % 3 != 2) { // not preceeding a colon
          String currentText = this.getText();
          setText(currentText.substring(0, caret) + "0" + currentText.substring(caret+1));
          success = true ;
        }
        this.positionCaret(Math.min(caret+1, this.getText().length()));
        }
        return success ;
      }
  
      @Override
      public boolean deletePreviousChar() {
  
        boolean success = false ;
  
        // If there's a selection, delete it:
        final IndexRange selection = getSelection();
        if (selection.getLength()>0) {
          int selectionStart = selection.getStart();
          this.deleteText(selection);
          this.positionCaret(selectionStart);
          success = true ;
        } else {
        // If the caret is after a digit, replace that digit with a zero and move the caret backward. Else just move the caret back.
          int caret = this.getCaretPosition();
          if (caret % 3 != 0) { // not following a colon
            String currentText = this.getText();
            setText(currentText.substring(0, caret-1) + "0" + currentText.substring(caret));
            success = true ;
          }
          this.positionCaret(Math.max(caret-1, 0));
        }
        return success ;
      }
  
      @Override
      public void deleteText(IndexRange range) {
        this.deleteText(range.getStart(), range.getEnd());
      }
  
      @Override
      public void deleteText(int begin, int end) {
        // Replace all digits in the given range with zero:
        StringBuilder builder = new StringBuilder(this.getText());
        for (int c = begin; c 23) {
            return false ;
          }
          if (mins < 0 || mins > 59) {
            return false ;
          }
          if (secs < 0 || secs > 59) {
            return false ;
          }
          return true ;
        } catch (NumberFormatException nfe) {
          // regex matching should assure we never reach this catch block
          assert false ;
          return false ;
        }
      }
  
      private final class TimeUnitBinding extends IntegerBinding {
  
        final Unit unit ;
        TimeUnitBinding(Unit unit) {
          this.bind(textProperty());
          this.unit = unit ;
        }
        @Override
        protected int computeValue() {
          // Crazy enum magic
          String token = getText().split(":")[unit.ordinal()];
          return Integer.parseInt(token);
        }
  
      }
  
    }
  }