Size of the application icon... Home screen will not use the right one. Help!

Similar Questions

• STR-DA2800ES home screen will not display on the VPL-HW40ES

  I'm not able to get home' of the screen to show through my projector VPL-HW40ES-STR-DA2800ES.

  I have:

  1. Confirmed that the entrance of projector is selected the right input (HDMI 1).  Content doesn't circulate in the receiver and displayed on the screen.
  2. You press "AMP" on the controller and I see the "AMP" and "rm put in place" to turn on when I press the 'Home' button
  3. Button of remote control and 'Home' on the remote control work.   By pressing the 'Home' key turns on the receiver.
  4. Tried to hold the "Home" button for 2-3 minutes.

  I am looking for a solution that would not require me to do a factory reset.  I got a home theater company do the installation and do not want to have them come and reconfigure.

  Thank you!

  I pulled the power and it now works...

• InDesign 2015 HOME SCREEN will not open.

  New InDesign CC (2015): WELCOME SCREEN does not open. Error message below is displayed when the program opens, from the home screen is set to open when the program opens. In addition, while in InDesign, if you manually open the home screen on the Help menu... same error. (Never seen that before; it did not with the 2014 version.)

  This can be corrected? I don't want to just DISABLE the Welcome screen... I would like to SEE what is on the Welcome screen.

  

  Hi bilglas,

  Can you confirm if the home screen works well in Illustrator CC 2015?

  Since the 2015 CC Illustrator and InDesign CC 2015 use exactly the same CEPHtmlEngine.exe, it works in Illustrator, but not in InDesign, I suspect that some of its files are corrupt or missing. Could you please try this?

  -Uninstall InDesign CC 2015.

  S ' there is all the remaining files in C:\Program Files\ADOBE\Adobe InDesign CC 2015, delete them.

  -Reinstall InDesign CC 2015.

  Thank you

• Windows 8 disc locked; It does not start at the home screen, will not auto repair and doesn't give me access to safe mode

  Nightmare; perfectly working windows 7 64-bit configuration I upgraded (stupidly) to Windows 8 (it seems installing a 32-bit version for my troubles). I installed a driver for a having previously worked USB WiFi adapter (that is, it was working fine before the upgrade) and now it does not start. It says "irql less than equal", says his collection of information and restarts to a kind of repair mode, none of the options which work because he complains that the hard drive is locked. Any attempt to start in SafeMode (SHIFT + F8) fails, with mnode security options panel shows ever in service options. Really, a very incomplete piece of software - I should know better than to install version #1 what whatsoever.

  Suggestions for moving forward? No, I don't have a record of victory 8 because I updated my installation of windows 7 perfectly work in updating online.

  Simple repair that has worked for me.

  If you have a windows install disc (if you borrow 1 from a friend)

  run the disk at startup, press on f9 to choose cd rom as boot, press a key when it asks you,

  Let the disc to the refreshment of startup repair section, choose Advanced & go to the command prompt and type.

  Bootrec.exe

  Bootrec/fixmbr

  Bootrec.exe/fixboot

  Bootrec.exe/RebuildBcd

  When all this is over, it will show that your o/s and the reader don't worry if it shows as D instead of C, it is because the system resource use C at this point, it will ask you if you want to add this player to your startup type Y and your good to go, your old win 8 will draw upward as it did before spread the word.

• How to remove icons that I will not use BlackBerry Smartphones?

  Can I remove programs that I don't want?

  For example, the "Instant Messaging" icon... or... the "Center application" (which suggests you to download some programs).  I'm not going to use... Can I remove these?

  Thank you

  Welcme cmmunity supprt frums

  You can highlight and hide... Or I made a folder called MISC and put all the items you don't want in there hide the folder

  ENJy your BlackBerry!

• iPhone SE: rotation of the home screen does not work

  Hi guys,.

  I already looked for answers to this problem in discussions, but I couldn't find anything that solves the problem. Here's the situation:

  -brand new SE iPhone: he got yesterday and just imported my contacts, changed some settings and installed a few applications... that's all.

  -Home screen does not turn in landscape mode (my previous blackberry contact made it by default, so I'm used to doing all that on the phone horizontally keep and wasn't expecting such a problem with iPhone); rotation does not also happen in the app store. However, it runs perfectly landscape when you use applications (Calculator, messages, etc.).

  -J' tried the solutions suggested by other users in different threads:

  (1) checked the lock on the gray screen (it was off). tried to turn it on and then again on the way to see if the rotation is enabled without success.

  (2) looked in ' settings/display and brightness' to see if "zoom mode" has been activated to move it off but discovered that the iPhone SE (or his version of the iOS) has no "zoom mode" option in this Panel... no problem, but no solution: /.

  (3) I think that try a reset should not be necessary, that the phone is brand new and it behaved like that the first time I have it turned on (I reason?).

  (4) I read that some versions of the iPhone (for example 6) do not have the "home screen rotation" function (which, to me, seems completely absurd) and, supposedly, you can use the phone in portrait mode, while the 6s for a reason any the available option: the specs should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  Thank you all in advance... I hope that someone will come up with a solution because I know, it seems a stupid thing, but for me, it's terribly boring.

  the plug should be similar to the 6s, anyone know (for sure) if the home screen rotation is supported on the self?

  To my knowledge, no.

  Barry

  P.S. I have a.

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot

• 10 BlackBerry internet BBz10 add to the home screen does not!

  the option to add to the home screen does not work, when I have this options says added to homescreen after recording, but do not display icon on the home screen, can anyone help please.

  Hi everyone I have solved the add to home screen problem, when you choose to add the name to the home screen is highlighted in blue, everything that I had to do is tap the name to remove the highlight and then save.

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What to do when the required help screens will not accept any existing ID or passwords? 13 download to PC elements missing section archive. Normal help screen will not accept any adobe exisitg D. Whatdo, I do now?

  What to do when the required help screens will not accept exixting ID or password?

  Downloaded items 13 PC. Implementation noted this archive missing article.

  If something is demanding a password is not likely to be a request for Adobe since Adobe does not normally require any.  It could be your computer's security requiring you to allow an installation to occur.

• The CC app home screen does not load

  When I run the CC app on my PC (Windows 7, 64-bit), the home screen does not load.  The indicator of activity just sits there and turns.  It worked before, but not for the last days.  The other screens work very well.  Any ideas?

  Thank you

  Mitch

  Mountain Storm fine arts

  Hi Mitch,

  Welcome to the community!

  If the internet is fine so maybe it's becase of files cloud creatives, please try the steps here described in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g - cc.html and see if it works.

  Thank you!

  Ankit

• application to get to talk to a technician, will not accept my product ID number, and it is the right one

  I was wondering that with the restoration of the system of things are ok for the moment, however, I arrived to find that I need the ati catalyst display driver, I think it is and I had deleted that not realizing what's really was.it has been recently although i became alert. As I said I did system restore and things work well for the moment. But how the ati catlyst, more I tried to apply to get to speak with a technician but you must put the product identification number and I have the right one but it does not accept so I can't get to talk to a tech cause there are other drivers too that need updates and I do not know the name of their , and I assume that they would be able to find them. So, how can I get with a tech where this crazy to do application does not accept my product ID number

  There dell and got the product number id is dell optiplex 745 and I have the serial number and express service code, product id number is what the application to get him talking about technology, it's what's not in ecxepted I get the error message indicating that it is the wrong code when I know very well that it is the right code

  "System Restore" - do you mean the one built into Windows or a Dell may have placed on the system to restore the computer to its factory settings?

  Just go to the Dell Support web page, drivers and downloads section and choose the OptiPlex 745 in general and the correct operating system and architecture (32-bit or 64-bit) to display the list of drivers for your operating system Dell approved.

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• Can't connect, connection startup screen will not respond to mouse clicks or keyboard

  I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

  Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

  You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

  Tricky