Size of the LUN Max size minimum and maximum RDM?

Similar Questions

• Font size minimum and maximum in Blackberry

  For all developers,.

  I want to create a choice field of object that contain any size to set the font...

  I wonder what is the minimum and maximum value for the font size...

  Maybe in Ui.UNITS_pt or Ui.Unit_px

  Thanks for the responses... ^^

  I have not seen these figures.

  I have never tested the minimum, but the maximum I've tested that works is 60 pixels.  I suggest you try to confirm.

  I would actually test this on a variety of devices, I suspect that there are differences in the formats supported according to the resolution of the screen.

• How can I change the minimum and maximum values on a map of metrics.

  Sorry, I'm new to vCOPs and it drives me crazy.  I searched the community and Google, but found nothing so thought I'd post here.  I am interested in a VM in vCOPs and select operations - tab the metric.  I add the CPU usage | Use (%) to the table.  By default, the y-axis is has a low of-40 and a maximum of 60.  Well, my % of the CPU usage never goes below 0% right?  It's hard to look at this figure.  Also, I like to see usage to 100% as a maximum rather than somewhere just above where is the top of the chart.  Looks like there should be an easy way to change the minimum and maximum y, but I can't seem to find it.  Can someone show me what I'm missing here?

  Thank you

  Bob

  He does. There is no way to force it to a specific axis. For vC Ops, there is no concept of a "desired" min and max for Y axis in respect to the display by the metric system settings type. All the data is dynamic and can be any value graphically speaking.

• What is the allowed minimum and maximum of ideal value for sound quality?   What units are these numbers? for example dB

  (1) what is the name of this Volume Audio monitor?

  (2) what is the ideal minimum and maximum value allowed for a sound quality?

  (3) in practice, up to what maximum value can I allow?

  (4) what are these numbers? for example dB

  Thank you.

  1. the audiometers

  2. level of reference is usually given as -12 or - 20 for the film. Normal speech level is usually 05:45.

  3. less than 0 for forts, ttransient sounds. Highly compressed music will be close to zero.

  4. the decibels

• Two text fields each other also have the values of the minimum and maximum fields?

  I have two text boxes that are mutually exclusive: one is a dollar amount per pay period, and the other is an annual amount in dollars. User can enter an amount in the box of one or the other (but not both), and I used the validation for this below script:

  Field1 script:

  If (event.value) this.getField("Field2").value = "";

  Field2 script:

  If (event.value) this.getField("Field1").value = "";

  Now, I also Inow the field limit with the minimum and maximum amounts for these same fields. But, because the range of field values is an option button other than the custom validation script, it seems that I can't do both because I can choose only one option button:

  

  Is there a way to keep my custom validation scripts so that they are mutually exclusive, but also to impose minimum and maximum amounts for these areas?

  You must validate the range using a script.

  It will look something like this:

  if (event.value) {
      if (event.value<10 || event.value>100) {
            app.alert("You must enter a value between 10 and 100.");
            event.rc = false;
      } else this.getField("Field2").value = "";
  }
  

• ScheduledThreadPoolExecutor with minimum and maximum thread

  Hi all
  
  I need to implement something that is planning a number of potentially important small tasks over time. I would use a pool of threads to do this in an effective manner. I wish to have a configuration, for example, 1-10 of discussions where the threads are created as needed and if the number of threads max is reached, tasks are queued. The tasks are timed and repeat if I prefer the automated programming of the executor. The deployment environment and the number of tasks to manage will vary so adaptation of configuration and execution is important. When there is no work, I would like to scale down over time as well. Here is my small tent to reach a suitable with competition from Java API design...
  
  Now, looking at my options, it seems that ScheduledThreadPoolExecutor is a good match for my needs. So what I would like to implement is a mechanism to define the minimum and maximum number of threads that are created for the thread pool. I understand that it is the number of threads of"base" and the maximum number of threads in the java.concurrency terminology. However, I struggle to create what I would.
  
  It seems to me that the ScheduledThreadPoolExecutor is always created as a fixed size thread pool. So I can't set that I would have say minimum of threads 1 and a maximum of 10. There is the setMaximumPoolSize() method, I can call on the executor, but he seems to have no effect. If I create my own ThreadFactory, and use that to give me track when new threads are created, create a ScheduledThreadPoolExecutor with one set of threads 1, fixed the limit 2-wire and plan a set of 6 ongoing tasks in loops, it never starts higher than 1 threads. So it seems that it completely ignores the setMaximumPoolSize().
  
  There is the option to call allowCoreThreadTimeOut() and setKeepAliveTime() on the executor. When I look in the code of ScheduledThreadPoolExecutor, I also see that he prestarts always all discussions until number of threads core set when a task is scheduled. So even if I got the coreThreadTimeout and keepAliveTime for work, attributes that can not help me because it would always just he hike up base number. Otherwise maybe I could use that have a 0 min and max of the number of"basic". Or is the coreTimeOut for some other purpose?
  
  Well, the question of the "base" here is, is it possible I could create an executor who creates a number dependent threads according to the need (between x 1 and x 2 that I would define, for example, 1-10) but achieved x 2 at the start of the queue of tasks that come? It seems that the whole API is to assume I want either a fixed number of threads with the unbound queue or an unlimited number of threads with a queue bound. No way to have a set bounded discussions with min and max thread bodies, as well as the queue without terminals when the max thread count is reached? And can I get that with ScheduledThreadPoolExecutor enough, please?
  
  Or maybe I'm just the idea of simultaneity just bad here for somewhere? Is a kind of best practices of competitive access to pigs immediately the maximum number of threads, you think you might need later conflicts of resources? This is why there is only the size of the "fixed"? In all cases, ideas and help is appreciated.
  
  Well thanks for reading this far... and all answers of course!

  Yes, this particular scenario is difficult to achieve, and Yes, it seems that the standard behavior for me as well. You can sort of achieve this effect by using the feature "allow core of timeout threads. Basically, build you a pool of 'fixed' size with a queue boundless, but the flag 'allow the kernel thread timeout' set to true. This will essentially give you what you want, except that the 'min' size is 0. This seems to be a reasonable compromise to me because you do not need to write custom code (I had already implemented a scenario you describe, a queue of unlimited blocking which 'lies' to be full until the maximum pool size is reached).

  example:

          ThreadPoolExecutor executor = new ThreadPoolExecutor(maxPoolSize, maxPoolSize,
                                                               60L, TimeUnit.SECONDS,
                                                               new LinkedBlockingQueue(),
                                                               threadFactory);
          executor.allowCoreThreadTimeOut(true);
          return executor;
  

• Each scale minimum and maximum for each slide table slides

  Hello

  is it possible to set values mini/maxi different scale in a group of slides via property nodes? As far as I know that's not possible. All the slides in the table must have the same minimum and maximum value. I only find a way to change all the scales at the same time. Are there any other ideas?

  Thanks in advance

  LVW

  Hi lvw

  You are right on the table, it is not possible to have different scale values. If you don't have a small number, you may be able to use a cluster of sliders, then you can set each individually. You can use the table for cluster and cluster to table to convert data types. You can also use cluster control references to define each level individually.

  Ian

• Change of minimum and maximum voltage that we expect to generate/measure

  Hello!

  Our application has a FOO and one task of tension HAVE with digraph maxVal + 10 and-10. We acquire/generate n times m samples (for a total of m * n samples). It is possible to reconfigure the digraph/maxVal each of the n times (according to the samples generated/acquis) in a quick way? If I'm not mistaken, it is possible, by stopping and recreating the task (by calling DAQmxClearTask, then DAQmxCreateTask and finally DAQmxCreateAIVoltageChan or DAQmxCreateAOVoltageChan), but as far as I know it is a slow operation and is not a good thing for our application. Are there other ways to do it? In fact, we use the NI PCI-6229 map.

  Thanks in advance!

  Hello

  It is possible to set (and also get) the minimum and maximum values for a channel DAQmx: in LabVIEW property DAQmx channel analog input nodes: Maximum values and Analog Input: minimum, in textual languages with features DAQmxSetAIMin, DAQmxSetAIMax (and similarly for the AO channels).

  However, for the boards of the M series it is not possible to set these properties when the task runs, so you will need to stop the task, set the new values and restart the task.

  I hope this will help!

  Bye!

  Licia

• the LUN max size

  Hi all

  We ordered a new EMC SAN. The capacity is 9 to. Now, we want to create a single LUN with all the 9 TB. I read something about booking SCSI problems on large LUNs. On this LUN must be running 40 VM in the future with the DB Applications.

  Concerning

  Thellier

  OK... it's here... I think you're talking about measurement of the disk. Suppose you have a small 20 GB Lun with the VMFS file system. You can do that a larger VMFS volume by measurement of the disk. Go to the properties of the LUN data store, there you will find an option to add raw LUNS in your present data store so that your only VMFS is stride across multiple LUNS. I hope that this time, I have read your query straight :-))...

• Initial size (MB) and maximum (MB) size should I use to add more RAM to my memory?

  I followed the instructions on a video on how to add more RAM to your computer without taking it apart.

  I followed all the steps up until I came to the part in the dialog 'virtual memory '.  Where it says, 'custom size' you have to put the ' initial size (MB) and the ' size maximum (MB).  How do I know what size to put in this area?

  I looked up my information on my computer:

  Windows Vista Edition Home Premium

  Memory: 1.00 GB

  System type: 32-bit

  Now, while I was following instructions to add more RAM.

  my computer displays this information:

  in the performance option dialog box:

  In the tab advanced under virtual memory, it is said:

  "page for all readers file size: MB."

  In the virtual memory dialog box:

  for the C: drive:

  There's the initial size (MB) - white

  and (MB) maximum size - White

  What should I do in this case?  What would be the initial size and maximum size?

  Hello Palette,

  You talk about 'virtual' non-physical memory. There is a difference.

  UPN based on the amount of RAM 'physical' you have in your machine the ' virtual RAM should be of approximately 1.5 hour of Aries. You have currently 1 GB of physical RAM Windows allocates already 1.5 GB RAM virtual and, frankly, it is better to let Windows manage the virtual memory file.

  If you want to improve then install the physical RAM more. Your guide to computer manufacturers will tell you to what maximum physical RAM, you can install and what type it is. I admit that I have changed the physical RAM to many times so know what I'm doing, but, frankly, it's less of a hassle to change the physical RAM which play with virtual RAM.

  RAM memory modules simply slide in and are cut in place. Change the RAM in a desktop computer is easier than a cell phone, but you will get much better results increase the physical RAM that you would changing virtual RAM.

  Of course, this is assuming that you need in the first place of the increased RAM. I recently increased my physical RAM of 4 GB to 8 GB and hardly noticed any difference.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• What are the minimum and maximum of a competing request ID numbers

  Hello
  
  I was wondering where the concurrent request ID start for example 0,1, or 10000 and where they "check". For example, is it to 9999999, 99999999 or higher.
  
  I have a feeling they start with four or five digits may be 1000, but I could not find a direct reference in the manuals or on the Support website. I don't think that the maximum size of the FND_CONCURRENT_REQUESTS table's history, but can be a problem.
  
  Oh, I mean a 11.5.10.2 instance in my case, but would be interested in the case of the 12 too.
  
  Kind regards
  
  John

  Hi John,.

  ID of the request is picked on the sequence FND_CONCURRENT_REQUESTS_S, see wats the value in the startup sequence. In 12.1.3.8, it's the same thing in 12.0.6

  Simo

• How can I detect the minimum and MAXIMUM values of the inputs to the NOR-Scope channels (NI-SMU-1073)?

  
  

  Hello Philippe,

  Take a look at the example below. Retrieves the Min and Max of table X and also correspondent has the value Y.

  Best regards

  Klas

• Get the minimum and maximum values

  Hi all
  
  Please, how can I solve the problem below.
  

  WITH DT1 AS
  (
  SELECT 'A' ID,  3 MIN_VAL FROM DUAL UNION ALL
  SELECT 'B' ID, 25 MIN_VAL FROM DUAL UNION ALL
  SELECT 'C' ID, 55 MIN_VAL FROM DUAL
  ),
  DT2 AS
  (
  SELECT 21 MAX_VAL FROM DUAL UNION ALL
  SELECT 37 MAX_VAL FROM DUAL UNION ALL
  SELECT 41 MAX_VAL FROM DUAL UNION ALL
  SELECT 51 MAX_VAL FROM DUAL UNION ALL
  SELECT 67 MAX_VAL FROM DUAL UNION ALL
  SELECT 76 MAX_VAL FROM DUAL
  )
  SELECT ID
       , MIN_VAL
       , MAX_VAL
    FROM DT1
       , DT2

  expected result
  --------------------
  ID  MIN_VAL  MAX_VAL
  A         3       21
  B        25       51
  C        55       76

  Kind regards

  Using the analytical function LEAD:

  SQL> WITH DT1 AS
    2  (
    3  SELECT 'A' ID,  3 MIN_VAL FROM DUAL UNION ALL
    4  SELECT 'B' ID, 25 MIN_VAL FROM DUAL UNION ALL
    5  SELECT 'C' ID, 55 MIN_VAL FROM DUAL
    6  ),
    7  DT2 AS
    8  (
    9  SELECT 21 MAX_VAL FROM DUAL UNION ALL
   10  SELECT 37 MAX_VAL FROM DUAL UNION ALL
   11  SELECT 41 MAX_VAL FROM DUAL UNION ALL
   12  SELECT 51 MAX_VAL FROM DUAL UNION ALL
   13  SELECT 67 MAX_VAL FROM DUAL UNION ALL
   14  SELECT 76 MAX_VAL FROM DUAL
   15  )
   16  SELECT ID, MIN_VAL, (select max(max_val)
   17                         from DT2
   18                        where max_val
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/07/creare-documenti-office-da-plsql/]

• Try to generate minutes date using the minimum and maximum date

  Hello
  
  Generate data to date in minutes using the min_time and max_time of the table or query specified, below
  

  With time_data as
  (SELECT 1 sr, TO_DATE('5/5/2009 7:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM') min_time,
                TO_DATE('5/5/2009 9:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM') max_time FROM DUAL
   UNION ALL
   SELECT 2 sr, TO_DATE('5/5/2009 10:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM') min_time,
                TO_DATE('5/5/2009 12:00:00 PM', 'MM/DD/YYYY HH:MI:SS AM') max_time FROM DUAL)
  SELECT * FROM time_data;
  
  SR     MIN_TIME     MAX_TIME
  1     5/5/2009 7:00:00 AM     5/5/2009 9:00:00 AM
  2     5/5/2009 10:00:00 AM     5/5/2009 12:00:00 PM

  The output I am looking for is,

  5/5/2009 7:00
  5/5/2009 7:01
  5/5/2009 7:02
  .
  .
  .
  5/5/2009 9:00
  5/5/2009 10:00
  5/5/2009 10:01
  5/5/2009 10:02
  .
  .
  .
  5/5/2009 12:00

  I tried this query, but it seems not to work,

  With time_data as
  (SELECT 1 sr, TO_DATE('5/5/2009 7:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM') min_time,
                TO_DATE('5/5/2009 9:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM') max_time FROM DUAL
   UNION ALL
   SELECT 2 sr, TO_DATE('5/5/2009 10:00:00 AM', 'MM/DD/YYYY HH:MI:SS AM') min_time,
                TO_DATE('5/5/2009 12:00:00 PM', 'MM/DD/YYYY HH:MI:SS AM') max_time FROM DUAL)
  SELECT TRUNC(TRUNC(min_time)+level/1440,'MI') udates FROM time_data
  connect by TRUNC(TRUNC(min_time)+level/1440,'MI')  <= TRUNC(max_time, 'MI');

  Ideas please...

  With 10g
  Salim cordially.

  WITH time_data AS
       (SELECT 1 sr,
               TO_DATE ('5/5/2009 7:00:00 AM',
                        'MM/DD/YYYY HH:MI:SS AM'
                       ) min_time,
               TO_DATE ('5/5/2009 9:00:00 AM',
                        'MM/DD/YYYY HH:MI:SS AM'
                       ) max_time
          FROM DUAL
        UNION ALL
        SELECT 2 sr,
               TO_DATE ('5/5/2009 10:00:00 AM',
                        'MM/DD/YYYY HH:MI:SS AM'
                       ) min_time,
               TO_DATE ('5/5/2009 12:00:00 PM',
                        'MM/DD/YYYY HH:MI:SS AM'
                       ) max_time
          FROM DUAL)
  SELECT min_time dt
    FROM time_data
    model partition by (sr)
    dimension by (1 rn)
    measures( max_time,min_time,(max_time-min_time)*24*60+1 dif)
    (min_time[for rn from 1 to dif[1] increment 1]=min_time[1]+ numtodsinterval(cv(rn)-1,'minute'));
  

• Validate a field with the minimum and maximum values

  How can I register a form in Livecycle designer?

  http://www.java2s.com/code/JavaScript/form-control/Validateaninputfieldwithminimumandmaxim umvalues.htm

  Can someone help me with a sample?

  Just replied to your other thread.

  Paul