Size of the placed Image and the difference in quality

Similar Questions

• Report on the size of the placed image and resolution?

  I was asked by a customer today "CS4 allows you to create a report on the file names and sizes, they are accustomed to?"

  
  They're getting slides scanned at a higher resolution and the resolution over the cost.

  I guess I need: what appears in the Panel of info from the link (real and effective ppi), the size in inches or centimeters and (ideally) the width and height of the object boxes are placed in (to ensure that the harvest is not too drastic).

  Anyone know of any scripts or a secret Panel that I can't find?

  See this post.

  May be just what you need, or perhaps with a little tweaking.

  Noel

• Grids of, how to place above the objects and placed images?

  PS the grid can be displayed above the jpegs allowing me to measure exactly, AI shows the grid below placed images and vector obects, which means that I am not the squares of the Board through the objects and images to place my other lines and shapes, is this possible? Place the rack over the objects and placed images?

  Yes. In the preferences: guides & grids: uncheck the box for the grids at the rear. easy.

• White spaces between and vertical shifting of images (and text) as a preview of the browser

  I built my site in Muse, but when I preview the, there are white spaces of different sizes that appear between images and text. In addition, an entire section of the Web site has moved down through an entire page. Here are a few screenshots as I can manage them. Unfortunately it is not yet hosted, so I can't post a link.

  Just a note: I'm build this page of my site as a portfolio to side scrolling. At the beginning of each "page", I added an anchor point, and I've added a 'back to the start arrow' so that the elements of different menu on the far left of the page (at the beginning) a link to their respective 'page' along the portfolio of horizontal scrolling. Similarly, the "back to the start arrow" menu link.  I don't know if this is part of the question, but it seems that it shouldn't be, because I got that simply making the page extremely broad and not very large.

  Here are a few screenshots.

  Inside, Muse:

  

  Leave the browser preview:

  

  Inside the Muse:

  

  Leave the browser preview:

  (Here are two screenshots only because they were separated by white space so that I could not them on the screen at the same time.)

  

  

  A more. This one shifted downwards, rather than on the side. Note that I did so that the image on the bottom was not attached to a low sticky footer or anything.

  Inside, Muse:

  

  Leave the browser preview:

  

  Thank you!

  Well well, the standard answer (and I should perhaps store them somewhere as a copy & paste NOTE): you must use groups and other methods of structuring as widgets. Your items may not stick together because they have no container parent to hold them together as in reverse, they can overlap with because they have no logic telling them everything that is left, right, above and below. Muse is not a page layout program and you not post a PDF file where everything is nailed in place. dumping everything on the page without which concerns the way in which it will interact in your browser never gives the result you expect.

  Mylenium

• Is it possible to add keywords, alt tags and title tags to lightbox images and/or triggers?

  I build a mobile site that is fairly heavily dependent on lighbox poster for the scrolling feature. The issue I encountered is I should be able to add alt tags and title images in the device of light therapy (slide show) to keep the SEO of my website. I designed only some of the pages so far, and I'm going through is that once an image is considered to be a 'trigger' of muse, I can add is more the elements of SEO in the same way, I can when it comes to an image.

  A few ways to get around this, I found are:

  (1) export the Dreamweaver site and then I can go the code and add the SEO for images in the lighbox on the backend.

  (2) I can build the frame by frame and then site more to file each trigger for the lighbox slideshow.

  The problem with #1 is that when I export my Dreamweaver site is then modified in muse. I see this pose a huge problem, as I move forward with new iterations of my site. Changes in dreamweaver are not transferable to muse and creating two separate sites. This means that I would need to recreate all the seo built whenever I update the site. This is not really an option and is not efficient at all. Is there a way to come and go between these two products I know? This would be more useful.

  Question # 2: I built each project page on the great site as for most background images with triggers asked. I did it to try to lower the overall gerth of the site, but it is apparent that I won't be able to work around this problem and maintain seo, of that I'm looking.

  All experience this problem and solved?

  Here is the site to date:

  ghatest. BusinessCatalyst.com

  Thank you for your comments!

  Placed images and the images in the slide show supports tooltips (the "title" attribute), and the text via the menu content 'change Image Properties... '. ».

  

  

  Strictly speaking, in HTML (images of filling) background images do not support these tags. That said, in certain contexts, it may make sense to Muse allow to set these attributes on an arbitrary object (which may, or may not, have a picture fill).

• anchors of a placed image tilt

  Hey all,.

  I have problems with editing an image placed in illustrator CS4. I noticed with any shape drawn in illustrator, you can use the direct Selection tool to change the position of the individual anchor points. I'm trying to do the same thing with a placed image and I want to stretch and tilt as I do, masking and shear does not give me the effect I want.

  I thought it would be fairly simple as photoshop has a similar (but too tedious) way to do it with the warp tool and was dragging an anchor on my image in illustrator hoping he could do the same thing.

  Did I miss something or someone has ideas how to do it?

  Thank you

  Pav

  Applying an envelope distort match way Photoshops of warping

• Why is there a difference between the size of the image in photoshop and the investigator?

  I compare this picture here... In photoshop, he says 1.03 MB, and it is said in the finder 217 k.  Same location of the file, even on my computer.  Anyone know why?  Thank you!!!

  

  
  

  
  

  Because there is a difference between the size of the physical FILE of a recorded file, and the actual size of the same file MEMORY use when it is opened in an application.

  Jpg is a file format of an image compressed with loss that compresses the image data when recording. When you open this file in Photoshop, it will be decompressed in memory, as Photoshop requires access memory of uncompressed data.

  Simple as that. Try to save as uncompressed tiff file. You will notice that the file size will be the same as the open in Photoshop.

• What is the difference between the size of the canvas & Image size?

  What is the difference between the size of the canvas and the size of the image in Photoshop?

  A picture says more, I changed the size of the canvas (Transparent background) and the image to the left to the bottom right:

  

  Now you can use the space on the left and on the top of the image to add other objects or images.

• image sizes for the photo and moodboards clipping masks

  Hello

  I place images/photos to the web and Pinterest on my plans to work in Illustrator for both mood/inspiration cards as well to use with clipping masks.

  Should I adjust the size of the image files in photoshop before placing them so that my illustrator file does not become too large?

  Or can I use object > rasterize > and choose the resolution/ppi to do the same thing?

  Thank you

  LM

  elizabethm56272654 wrote:

  Should I adjust the size of the image files in photoshop before placing them so that my illustrator file does not become too large?

  Of course, you must define your own strategies for these questions according to your needs. Sure raster image data, excess will swell your files unnecessarily, but according to the availability of extra storage space in your computing environment and your ultimate output intent, may not be worth the extra time and effort for the goal-size things in Photoshop before placement. Only you can decide that priority. If the images are 'of the web and Pinterest', chances are, they are already low-resolution, and you would not shave number of bytes out of them anyway.

  Or can I use object > rasterize > and choose the resolution/ppi to do the same thing?

  N ° which is designed for elements vector rasterize at your chosen resolution. It will not change the resolution to something that is already rasterized.

• difference between the graphic image and blank image

  HI Forum,

  How can I get the difference between the framework that has graphics or links placed in it.

  and

  a framework without graphics or links placed in it.

  If I say this, it is applied to two things.

  so I need to get separate alert for the framework that has put in links and frame rectangle without links...

  REC = app.documents [0].pageItems.everyItem ();

  . constructor.name if (Rec.getElements () [0] == 'Rectangle') {}

  Alert ('the image contains image');

  };

  and the other, I like to do Forum...

  Thank you very much...

  Hello

  Iterate over doc.splineItems

  and check whether doc.splineItem [i].allGraphics.length == 0

  (no graphics placed)

  Jarek

• Text and the size of the image - computer and Mobile

  The size of the text for the h1 and the footer on the website, we have created using Dreamweaver CS6 seems well seen with a computer in Firefox, Chrome and IE, but it is really big compared to the text in the sidebar1″ and the menu bar on an iPhone.  On an iPhone, the text reduced properly sidebar1″ and bar menus spry, but don't spread as you wait for h1 or footer, language which means that the page to be very long.

  Using the CSS panel, we set the font size of 11 pt and 100% h1 and it does make a difference.

  Also an image in the sidebar is still large and runs outside the sidebar seen on an iPhone and an Android tablet.  We have removed the width and height in the hope he could solve the problem and allow the image to shrink compared to the sidebar, but it didn't.   You can provide any help would be great!

  Web site: pvwealthmgt.com

  PT is for printing. Try to use pixels instead.  12pt is about 16px.

  Nancy O.

• Pixels and the differences in size of document in Illustrator than Photoshop

  Why the pixels of a project in illustrator is different from that of the same proportion of pixel of a project in Photoshop?  Example: A project can in Illustrator can be a work plan of 950px X 950px in 12 inch and Photoshop, this same pixel ratio will be 4 3/4 in.

  The sovereigns in Illustrator are always with a fixed rate of 1 inch = 72 pixels (72 dpi), you can check this by right-clicking the rule and selecting inches or pixels and you will see that 950 px 13.9 inches and 12 inches will not be as you said.

  The ratio of the rulers in Photoshop depends on the resolution of the ppi of the image defined by the user in the Image Size dialog box. If choose Image > Image size and select a resolution of 72 pixels/inch (ppi) will correspond to the ratio of the rulers in Photoshop Illustrator. If you set it to something else, that they will not, in your case with an image with dimensions of 4.75 inches in Photoshop, the resolution will be 200 dpi in order to contain 950 pixels per side.

  When you save an image from Photoshop, which contains metadata, it contains information about the size of the document in inches and pixels. Illustrator will place these images with the size of inches not the pixels in the areas shown on the leaders of the Illustrator, internally, but the image will contain all the pixels, as indicated next to the IPP in the control under the main menu bar when the image is selected. These internal (real) image pixels will be used when printing, and when you zoom in on the screen to display the image. Also if you are copying from Photoshop and paste into Illustrator, he also will stick with the size of the po and not pixels (at least this is how it works with CS5 on Windows)

  If the placed image is without metadata Illustrator will always place it assuming that 72 px = 1 inch (72 dpi). You can check if in Photoshop to save an image using save for Web and devices and choose None for the metadata.

• How to upgrade the size of the hard drive and transfer all THE OS/software/data (image) of the original disk?

  HP desktop with a HDD normal computer. Win Vista 64-bit Windows.  But the question is generic for another one with Win7 and another with XP.

  The problem is that I want to do is to replace the hard drive with a new fresh Plus unit.  I want to keep exactly the same software as that on the original disc.   I want to know how to transfer data from the old disk to the new image.   I remember the old days BACK to copy just the files copy very well, but OS files data files and startup records, etc. etc. should be in areas on the disk, so you can not just copy the.  I know there are software packages ghosts to even a backup image to a computer, to recharge on a true double drive on a death warrant of the disc, but is it the same path to use for an upgrade?   Then, there will be no problem with MS or others by looking at the serial number of the disc material and decide on their software are installed on a new machine without a license?  etc.

  All experienced suggestions would be appreciated.

  IE brand disks: Seagate, WD, and a few others provide the software with the package of disk or from the Web site that allows cloning on the same drive size, but for a larger drive.  Acronis will be similar.  As long as the size of the disk is not unreasonable, they do it quite easily.  Depending on the age of the system, however, some may not tolerate the readers more great or the more recent huge 2 TB.

• How to change the size of the icon and desktop to original image?

  I logged on my computer and for reason of small images and icons are on that plus setting ive been looking for a way to set it to normal size. when im on the internet, I can enlarge to 100% instead of an increase of the size but not understand how to do to the page menu and everything which is not on the internt pages. Pls help very appreciated for any advice.

  I logged on my computer and for reason of small images and icons are on that plus setting ive been looking for a way to set it to normal size. when im on the internet, I can enlarge to 100% instead of an increase of the size but not understand how to do to the page menu and everything which is not on the internt pages. Pls help very appreciated for any advice.

  Not sure if this you will help completely. Please try this...
  Right-click on a free space of the desktop > view > classic icons

  Who help me?

  t-4-2

• Change the size of the image and the icons on the desktop

  January 21, 2016, I changed the image on my desktop and it came out if big it is beyond borders and the size of the icons increased so that each of them do not appear. I have tried everything to get things the way they were but nothing works.  Thank you.

  somewhere with the right button on the desktop where there is nothing.  Choose the resolution of the screen.  Find a solution that works for you.

  If you need additional help, please answer