size of the snapshot is taken from its volume?

Similar Questions

• ExecuteWithParams where the param is taken from a bean method

  Hello
  
  I worked on it for several days without a bit of luck.
  
  I have a VO based on a query using a variable binding in the where condition.
  I have a button on a page "ExecuteWithParams" (which went to the DataControl to the page)
  
  When the user clicks on the button, I want the value of the parameter is taken from the getter of a bean, so that the query can be executed with this value.
  
  Until now registering the bean and referencing in the pageDef do not work.
  
  What I'm asking, it's just the source code of the pageDef all corresponding to the simplest example with a VO with the parameter binding, as in my case.
  If you can, please send the code from a working example and tested.
  
  Now, I have:
  

  <action IterBinding="MyIterator" id="ExecuteWithParams" RequiresUpdateModel="true" Action="executeWithParams">
      <NamedData NDName="first" NDType="java.lang.String" NDValue="${viewScope.MyBean.first}" NDOption="3"/>
  </action>

  To test the bean, I used a text output in the page:
  

  <af:outputText value="#{viewScope.MyBean.first}" id="ot1"/>

  While the output element displays correctly the value, when I click on the ExecuteWithParams button, the table of query/no shows no line at all, that is not possible, because if I statically defined NDName with the value indicated by the element of output text, instead of using the expression language, so that the query works fine and the expected lines are shown in the table.

  duplicate {: identifier of the thread = 2341917}

• Now, the screen moves as the surface is larger than the actual size of the screen. I checked its display options, but how do I disable this screen oversized?

  Hello

  My mother was a member of the family to try to help inrease size but Bobo and now its screen in any program or simply from bottom of screen size is larger than the size of the screen.  She can move the mouse to the left to bring the extreme left veiw and then the same thing right but never have all the screen in veiw now.  How to restore to normal for her.  I tried control - display, but not... help her please help me

  Hi M Carmel,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with the resolution of the screen display.

  I suggest you to see the links and check.

  Change the resolution of your monitor

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• The size of the Snapshot file?

  OK, I know this is a question that has probably been asked a thousand times, but I'm still confused...

  Lets say I have a 10 GB vmdk file I took multiple snapshots. Instantane1 is/3 GB, snap2 is 6 GB and snap3 is 8 GB. I have delete all snapshots to merge them into the original vmdk.

  Snap3 merges with snap2 snap2 more, snap2 them merged with 1 instantane1 which finally merges with the vmdk origin more. I get that part, but I now see a 17 GB vmdk on the original file

  Or when 3 merges with 2 it merges only the differences between files 2 delta, then 2 does the same thing with 1 which would increase the amount of used space on the vmdk, but can not grow the overall size of the vmdk origin?

  don't forget instant not record changes on the basic disk, so when you consolidate snapshots they will make the changes on the basic disk and it won't ever larger that its size said, in your example, it would be 10 GB

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to increase the size of the field say product_code from 40 to 300?

  Hello
  
  I have a form, I need to increase the size of the field from 40 to 300?
  
  am new to forms, can one please give me detailed steps on how to do it?
  
  Thanks in advance.

  + > now my doubt is how to know that this field is my col2 in db and how to change it? +
  After opening form Form Builder, select the field in the form, press F4 for its properties, see the value of the Name property of the column. After that, go to the maximum length property and change to 250

• What to expect for the size of the snapshot?

  General question here regarding size captures instant vmware (or indeed any what clichés really).

  In an effort to ask the question here is a very basic example:

  If I had a 10 GB VM and I take a snapshot; the first snapshot will be close to zero.  So now let's say I leave this for a week and during that week snapshot, the virtual machine sees 2 GB of file system changes.

  The snapshot will be then 2 GB in size?

  If I drop the snapshot of another week and the VM sees 1 GB another change of files (deletes, adds, changes) the snapshot will be then 3GB in size?

  Thank you

  Yes, it's operation of snapshots in VMware products. The virtual disk parent is treated as read-only and go to all the changes to the snapshot drive (delta file). Please take a look at http://kb.vmware.com/kb/1015180 which explains this in detail.

  André

• Reduce the size of the snapshot

  Hi all

  I use VMWare 7 and have a virtual machine that is a series of snapshots. The OS is Linux (RHEL).

  I use this to install an Oracle database. I need to the virtual machine at an earlier stage, so I went back to capture instant, deleted what I and I have now to the fret.

  I can't do this because it's a snapshot. What are my options, I ran out of space on the disk hard part is this VM on.

  Thank you

  Alex

  your only option is to make a full clone of the current state, you are interested.
  Then, you can reduce the vmdk - there is no way to reduce the snapshots

• Possible to determine the size of the PDF when opens, from InDesign?

  Is it possible to set up my book document and preset what size it will be when it opens in PDF format? Right now my exported book open very wide. I would lke to change this, if it is possible...

  Hmmm, it must be that problem here.  This is a bug with CS5, don't hold your breath so that it is fixed, work is about to export to PDF Print that gets you the bookmarks, and then add the appearance attributes in Acrobat that obviously, you do not have.  If it's a stop I could do for you or you can download a trial but even if this bug is corrected you still cannot tell him to open with the Bookmarks panel to default as you can do in Acrobat format:

  

• Size of the disk system comments more

  Hello - looked through the FAQ and found the answer to this question. If I missed this point just me to a resource if it is a pain I tell myself that this has probably been asked before.

  I'm under vmware version 3.1.3

  Space for comments system has been upgraded with 40 GB. I was getting messages that I was running out of space of previous system disk, dumped some files and I saw free space on system of vm disk to grow as as expected.

  Since then, traveling abroad, I have a need to empty a few photos, etc. I want to grow the VM disk space if it has increased by stopping the prompt. Then I went to VM hard drive tool has slipped to the bar to resize to 140 GB, filled time I restarted the prompt, but that he does not see its system disk space increase. Stop the VM/comments down then went to the VM disk and checked the case tool to pre-allocate and let that complements.

  Restarted the guest and still don't see the VM system disk with the any added space.

  Someone can direct me to the right process to increase the comments/VM system drive so that I can increase the amount of available space or let me know what I am doing wrong?

  Thank you

  OK, didn't post screenshots. Wanted to take the time and review everything first. I managed has increased the size of the virtual disk to 140 GB, and it is seen by the Windows operating system. Windows now detects this virtual drive as 140 GB. The virtual machine still sees as 40 GB.

  Now, I want to increase the size of the existing VM/comments system drive sector, so he can use it.

  I did some research and found this method and have the intention to use steps 2 and 3 to change the BIOS, start it newly created iso CD/Gparted and runs from there.

  http://communities.VMware.com/docs/doc-9765

  If there is a better/more method that will allow me to increse/increase the size of the virtual disk sector please let me know.

  It is an old document obsolete and has been replaced by: resizing of the ramdisks with step by step Instructions

  However to resize a virtual hard disk is at least a two-step process.  First increase the size of the virtual hard drive through its settings and then second is to increase the file system partition.

• Lose weight - creation plug-ins LLB, using lvlibs, minimizing the size of the LLB

  Greetings,

  Is there a way to build LLBs include specific screws of VI - lib, but include all lib VI screws?

  I added an AALPro.vilib function in the hierarchy and, as expected, it didn't see the place in the LLB after construction.  In the past, I have re-written screws of VI - lib but I don't get lazy, so I unchecked "exclude files lib VI" in [LV8.5] - project properties - and the size of the plug-in went from 13 M to 50 M.  I hope there's a way to minimize this weight gain - an easier way of re-writing the hierarchy/function of AALPro.

  Any help is appreciated.

  See you soon!

  Hi to determine,

  Try to add the .lvlib to your project.  You should be able to add the specific VI that you want to the llb without adding the rest of them.  Let me know if it works for you!

  

• HP2000Z - 2 00 THE FUNDAMENTAL PROBLEM SEEMS TO BE CRASHING AND THE CHARM BAR. THE SIZE OF THE SCREEN WILL BE

  MY COMPUTER IS A HP 2000Z - 2 00.  8.1 FOR WINDOWS IS THE OPERATING SYSTEM.

  LET ME SAY THAT, AT THIS TIME, THE COMPUTER HAS BEEN RESTORED AT LEAST 5 TIMES. TWICE BY A TECHNICIAN OF HP AND THE REST BY MYSELF. I'M ABOUT TO PUT IT IN THE TRASH CAN.

  THE CHARM BAR CONTROL EVERY TIME I TRY TO DO ANYTHING WITH THE COMPUTER. I LIKE TO PLAY GAMES AND IT IS BY THE WINDOW. THE MOUSE FREEZES AND CAUSES THE CHARM BAR TO TAKE MORE. THEN THE SIZE OF THE SCREEN WILL CHANGE FROM REGULAR TO EXTREMELY LARGE OR IN THE OTHER DIRECTION TO INVISABLE.

  MY PATIENCE IS GROWING THIN. I HAVE DONE EVERYTHING I KNOW TO DO AND TRIED EVERYTHING WHAT THE TECHNICIANS HAVE SUGGESTED I DO. I JUST WANT TO ENJOY MY COMPUTER.

  By Jove, I think you hit on something. Radical change. It's good enough that I'm ' will call fixed it Professor. Thanks a lot, a lot. This thing could be a keeper after. You'll go far there teacher!

• How to increase the font size on the screen of welcome/Login?

  I use Windows 7 Premium on Acer Revo 3610 HTPC connected to a screen LCD of Toshiba 32AV502RZ (720 p). I change the font settings to use the large font size (150%), which seemed to work fine for the account administrator by default, but after that I have created the accounts of additional users for the members of my family, the elements of welcome/login screen becomes really small. I can hardly read the names of the users at a distance of 3-4 meters. Is it possible to increase the size of fonts (and possibly icons) on the welcome/Login screen? Also, is there a way to make fonts same Benoit that the option of customizing Office 150%? (Note: I don't want to reduce the resolution of the screen.) Thank you.

  To set the font size on the screen of welcome from 100% / 125%, 150%, use the respective reg file:

  If you don't know how to import one of these in your Windows registry database, you probably should not mess with the registry at all and instead ask someone who knows... But if you want to try anyway, here's how:

  1. Select the text for one of the files above (just text &, not the name of file) and copy it to the Clipboard (Ctrl + C)
  2. Open Notepad
  3. In the 'Edit' menu, choose 'Paste' (Ctrl + V)
  4. In the 'File' menu, choose ' save under... ". »
  5. In the drop-down list of "save under", choose "All files".
  6. Enter the name of the file
  7. Click on the Save"" button.
  8. In Windows Explorer, locate the file that you just created, and then double-click
  9. Confirm the UAC warnings and RegEdit

  WARNING: Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. See How to back up and restore the registry

  Greetings from Bavaria :-)

• Size of the document

  Is it possible to determine the size of the document using sketches from adobe?

  What happens if I take the document in photoshop and resize it more it will lose quality?

  HI Nadia,

  At the moment it is not possible to choose the sizes of canvas in the sketch, but in a coming update choose a document size will be possible. Until then, I hope this information will help a little:

  The exported files have a size of 2048 x 1536px (for anyone working on an iPad Pro it is 2732 2048px x); If you wish to send the job to CC in Photoshop, you can resize the work until (if I remember correctly) four times without loss of image quality.

  Who help me?

  Sue.

• Cannot change the size of the trigger

  whenever I try to change the size of the trigger, it returns to its original state as soon as I let go of the mouse. This is a problem because now all my goals are overlapping.

  I don't know if this is necessary, but it is a picture with a smooth rolling inside the trigger that is connected to a composition of light-box with a slide show placed inside that.

  any help?

  I'm assuming you are trying to set the trigger smaller, if you do this make sure that there is nothing else inside the trigger that is greater than to be the trigger. most of the time for me, I have a text box in mine

• The font size to the watermarks

  Hello.  I am tattoo photos, and even though I chose the larger font size 72 police appears tiny on the images.  I don't know what I did but have the watermark in large print in the past so I know it works.  Can anyone help please?

  lorainea52756690 wrote:

  Yes, you are entered in the character Panel, but did not say where to find the character Panel.  Photoshop is user hostile.

  Hi Loraine

  I feel for you faced with what is one of the more complex software on the planet.  All of us out of our hair and banged my head against the wall at the same time.  But I promise you that, once you get the basics, like in the way things work in general terms, your progress will get faster and faster.

  One thing you could do is to put in place a custom workspace. Go to the window menu and open all the minor signs, including the character Panel and add them one at a time to the vertical column under history and properties.  Drag until you see a blue line at the top and output.  When you have an arrangement anything remotely like below.  Click on Essentials (top-right), then new workspace and give a name.  You can see that I called it Essentials 2

  The point of this exercise is that 1) you can easily access these panels and 2) it requires you to know they exist.

  

  There are a lot of little tricks to remember concerning dialog boxes of Photoshop (applied to windows in need of the user).  You have thought of the size dialog box type in what concerns the use of the drop-down menu options, but you can also click in the window size, press the up arrow to select its content and type any number you like.  Alternatively, you can fly over the to the left of the size of the window and left-click, drag right to increase in size and left to decrease.  The important thing to remember, is the same trick works in countless other areas of Photoshop.

  Use the tab key a) commit values that you simply enter and b) switch to the next window.

  Escape fate you almost anything.