size of the Splash screen image
What should be the size of the image to the boot screen?
I did mine in 1024 x 600 (full screen) because the charger of the splash screen does not Center it nor does support transparency.
Tags: BlackBerry Developers
Where is the PNG image to Photoshop CS6 splash screen on Mac OS X?
If you want just the picture, why don't search you for 'adobe photoshop cs6 of a boot image' in Google images?
If you are looking to change it (which I'm not sure is against the EULA and copyright), you'll need a resource editor such as "ResKnife", with whom, must be opened
Search for "SplashBackground", select it and export it as .png on your system.
WARNING: Improper use of the .rsrc file will cause your crash PS / not open. I don't really know if mounting the SplashScreen is legal. I take no responsibility for any loss / damage to your system that may result in doing so! Do it at your own risk (technical & legal)!
HI - don't know if it's an unusual question, but my app not install/load on my Z10 when one or both of the pictures icon and Splash Screen are added in the descriptor of Bar. I development mode and have an installed debugging token and it is still valid. The strange thing is that the application will be installed on the Simulator without problem.
If I remove the splash screen images & icon in the Bar descriptor file, the application load on my Z10 with success.
The images are the right size: 114 x 114 px for the icon and 768 x 1280 px for the SplashScreen. The Momentics IDE accepts two files by activating beside them. I also tried to add the images to the Q10 & PlayBook and still no luck with this loading on my device. I even tried to go back to the image by default for the icon, and who does more either.
The error I get when trying to install my application on my Z10 with icon images & Splash Screen is:
Failure of deployment: Info: request shipment: install and launch
Info: Action: install and launch
News: Native debugging: on
Info: File size: 414105
Info: Installing com.example.ProfitCalc.testDev__ProfitCalc9866a36a...
Info: Treatment 414105 bytes
Someone has any ideas why this happens?
It is a known problem with certain versions of BlackBerry OS 10.1. This article explains the problem and provide a workaround.
Is not a computer geek, I'm sometimes thrown when my laptop is suddenly something differently when I have not intentionally "asked".
The last thing that has happened is a real nuisance and I would be very grateful if a brilliant person could put me right.
I keep a daily record of the changes to the e-important information by using print screen and save it to a file. normally, this image is saved as a certain size (pixels x 768 1366 pixels) that fits with my view of deterioration. About two weeks ago the same procedure suddenly gave place to an image SMALLER, but with MORE (?) pixels (1366 x 918) without consciously doing me something different. Can someone tell me how to get back to where I was before? It does not help if I increase the Zoom level I print screen; This only translates a picture cutting the edges of what I want to see.
Hope I have explained this in an understandable way.
Alright. Right after you click on paste, click on crop. This will ensure the area of the image exactly matches copied dimensions and will be the size of the exact screen of 1366 x 768 pixels.
- Before: Dough - save
- New: Dough - Crop - save
I couldn't find a similar thread with similar solutions, then we are, about 2 months ago, my Adobe Illustrator CC stopped opening. It starts up and displays the splash screen but then stops everything in "Reading Fonts" (see image below)
I had not changed anything or downloaded everything I know and I thought it would start working again, but alas.
I have a MacBook Pro (15 inch, late 2011) race Yosemite 10.10.1
Things I've tried so far the problem:
Uninstalled / reinstalled twice.
Restarted my computer a million times.
Cleared cache folders according to other suggestions from forums.
Reset the system fonts and remove all the fonts in the system (by font book, if there is another way to solve the question police please let me know)
Please help if you can, I'm at a total loss.
It is stuck on the screen:
Point 1) and 11) less than 5 years) in the following list may be appropriate (I'm not sure if FontBook serves you well) and 6 complete), too.
The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.
If possible / there is, you must record a current work first, of course.
(1) close Illy and open again.
(2) restart the computer (you can make up at least 5 times);
(3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);
4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:
5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);
Even worse, you can:
(6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.
I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.
Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
Finally I force-shut-down, power button.
Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.
Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
I kept trying to start, but the boot process is stuck, what happens is as follows:
* The three lights on the left (power, battery and light) come on, no problem
* HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
* At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.
Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!
I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.
I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.
Any help would be really appreciated.
> Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.
It could be a problem with the CD/DVD drive what you think of this idea?
Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.
In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).
Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.
_Regarding the battery CMOS: _
I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard
When I start my pc, the splash screen appears on the monitor, but after that he's black. I can hit one of the f keys to take me to the start page or diagnosis, but when I change the path of startup and press on save, then enter it just go to the screen black I have also hit the f9 key to go to the diagnostics page and run the hp diagnostic tool edge who said past when I try to return to the screen black new go! at first I thought it was a graphics card problem so I replaced the former with a same something new, I also tried plugging three different locations on the graphics card, I started with the dvi connector with an adapter on my cable even not, it will display the start page, just go s strait to no signal , so I went on the VGA slot that has been, I can get to the start screen, finally I tried the hdmi port and again, I can get to the start screen, but then it GB Black I removed the ram and cleaned and was going to try to go to Detroit from the motherboard to the screen, but I got scared when I saw the black cap with the words DO NOT REMOVE this topic! I tried 2 different monitors just to eliminate this probability but now I am just confused ideas would be appreciated!
The fact that you can see the splash screens makes me think that this isn't the video port or motherboard. My hunch is it could be a hard drive failure, operating system error, or problem of display settings. You never see a Windows screen until it goes black?
Have you tested the hard drive or made sure it appears in the BIOS?
I'm having a problem with the Software NI SignalExpress where the application fails to open completely - it closes immediately after the splash screen. I am using windows XP Pro. SP3.
I tried to uninstall, registry errors compensation and reinstall, I also tried the repair installation - or who work.
A test of SignalExpress installation was installed on my PC until I got a full copy with the purchase of a data acquisition (usb-6218).
Sounds a bit nasty. If repairing and reassembling and all this malarky does not recommend the use of msiblast to clean your computer of all the software of NOR and starting again with a new install. When you software uninnstall he didn't get rid of everything, there is still hidden folders around dootted.
I joined msiblast.exe.
-Make sure the radio button "Show OR installers only" is selected.
-Select all and then click on uninstall.
When this is complete, your computer will be NOT free. After that;
-Install all software from OR you for example LabVIEW Signal express
-Then install the drivers. The USB-6218 case uses the DAQmx driver that the latest version can be downloaded from this link.
If it persists then write again.
HelloI have a laptop wide screen (16:9) with a resolution of 1280 x 800. When I turn it on, the start screen (logo "Windows XP" and a loading bar) gets stretched and does not my screen resolution. Y at - it a fix for this?Kind regardsNathan
Nope - the splash screen uses the lowest possible resolution so that it will show regardless of monitor, card used graphic, video system or TV. This is basically the "infallible" mode
On my new Aspire Switch SW5-012 10 with Windows 8.1, I am unable to change the size of the on-screen keyboard. Microsoft can't help and refers to the Acer support.
Is there a solution to this?
There is no way to resize it.
When I start my notebook computer appears. I can't do anything until I'm close Notepad. How can I remove the notebook of the splash screen?
When I start my notebook computer appears. I can't do anything until I'm close Notepad. How can I remove the notebook of the splash screen?By Notepad, I assume you mean Notepad (i.e. notepad.exe) a text editor provided with all versions of Windows.
Press Windows key + R ( Start, run) and type msconfig and then click OK. Look under the tab to Start for an entry which involves the notebook and/or a file ending with . TXT. Uncheck the entry, and then click OK in the lower right. Restart Windows shouldn't start Notepad then.
All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.
What should I do?
Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?
According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.
I have two monitors, model S230HLbd. How can I stop the "Splash Screen" to appear please.
By Splash Screen, I mean the 'Acer' and 'Energy Star' logos that appear when you turn on the screens. I think they slow down the display of what you want to see.
There is no way to stop the boot process.
I have a HP Touchsmart all in one by using Windows 7. The machine is brand new.
Whenever I get the splash screen, if I am not for nothing, after that a few seconds, the screen turns off and then I can make it back by pressing any key and then click on my name from the entrance to ge the rear screen startup.
Hello jimtiger: I'm not familiar with the Touchsmart version 4 software. It works with version 3 of Touchsmart. Left click mouse any where on the screen click on customize. The opening of new windows screen saver goto adjust the wait time for a longer period of time. Can also change the settings of computer power. Control in the lower right panel, you will see tools and information on the performance up until it clicks. Top of next window right-click on the adjustment of the parameters of energy. Check high performance box. Who will now have a blue dot. Just beside it, you will see the settings of plan up until it clicks. You will see the screen dims: click the box next to it. My is set to 10 minutes below. Turn off the display: click the box my is fixed to 15 minutes. Put the computer to sleep: click the box my is defined. Never. Brightness is right-wing. Under that, you will see the change, click on advance power settings. Everything has a greater mark in it. Click ok. Close all windows should be all set now.
I do have problems starting XP 2 on two different hard drives. I'm more concerned at this time is described in the title. I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc.. It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case). I tried to remove some additional applications provided with the motherboard, no luck. I tried to reinstall XP several times, and who has not helped. I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc. He continues to hang at the splash screen (weakly). When I try to start in safe mode, it hangs at "mup.sys. So far, I'm able to get XP to start by repeated restart later... I searched the web to find a solution for this and have found no definitive answer. I just ordered another new hard drive and Windows 7. I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).
My other problem is on my old sister Hitachi 160 GB IDE hard drive. A few months, our PC stop working. After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues). Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop". He gets to the XP splash screen, goes black and restarts, again and again. I tried setting the installation of XP with XP CD 3 or 4 times, without success. This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent). My main goal with the old hard drive was to save all my data. That is, life turns on if I can't start XP on this drive (the one with the boot loop).
Thank you for your time!
The BIOS update has * seems * solved the problem! I rebooted it 4 or 5 times, but also completely off the PC and it starts today. Did not repeat the problem so far!
It is a great place to come to answer my own questions! Bookmark!
Maybe you are looking for
The memory on my iPad 2 is full - 46, 7 GB of it's Photo Library. We have deleted a whole bunch of images and they don't show more but the memory usage has not changed. I can't find a way to solve this problem on the iPad, and when I connect it via t
I have a HP Pavilion dv7 laptop and recently the hard drive has failed... It was running windows 7 home basic 64-bit and did not come with recovery disks. im going to buy a new hard drive to replace soon and I was wondering what discs do I have to ge
I want to be able to view or print the list of numbers that have called my 7520 HP all-in-one and (less important) these numbers that I wrote. I know that after a certain number of fax calls, a sheet of newspaper to report prints automatically. But
Have a Dell laptop 15 3520 running Windows 8.1 have been logging in fine and all of a sudden it will not recognize the password. System is configured to connect by using the account of Microsoft and no password. Now, he starts asking a password and c
Hello world I tried the API documentation for an interface that allows you to set access points on the BlackBerry with WiFi support. Unable to find anything, I turn to you guys. Does anyone know if there is an API available for the configuration of a