Skype problem - last version does not, please help

Similar Questions

• tried everyting to sort the "assertion failed" in LightroomCC, uninstall and installed it again, tried to check the photo folder in the user account, it still does not, PLEASE HELP!

  Had "assertion failure" at the launch of LightroomCC, tried everything help, uninstall and installed it again, tried to check the photo in the user account folder, still does not, PLEASE HELP!

  Thanks for the help.

  My computer scientist has created a new user in my computer and now the 6 Lightroom

  works very well.

  Thank you

• Sending of Photos does not, please help!

  My friend and I have updated Skype when updates a few weeks ago showed. When I send her a picture (and when she sent me), nothing appears. We don't see any which triangle or the error msg.

  For example: I send the picture and watch it load until I see the thumbnail preview. She sees nothing that sent the transfer at all (I tried with mp3 and those worked if this only happens with images) and when she tries to send me a picture, it can also see a thumbnail of the image, but I don't see anything. It's as if nothing has been sent in the first place.

  I use Win7, not sure she uses, but I think it's the same. I tried to update Internet explorer (although some topics here claimed that it is useless, after they have tried) as I have IE8, but he wouldn't let me not updated IE11 or whatever the latest version.

  I see of the solutions so far are so no decommissioning but to a former Skype on both computers. Thing is, we love the look of this new version and would like to avoid downgrading if we can make the image (all image formats as none work right now) work. We transfer a lot of pictures in both directions with our work and it is a necessity. We had to resort to transfer their thanks to yahoo and facebook messenger. It is simply unacceptable to Skype, really, sorry but it's true.

  It was hard enough we have been forced to spend nice MSN, perfect Skype and when Skype finally gets a similar look decent and options, we get this kind of problem? Everything simply unacceptable.

  Please help to solve this problem or we Demote or just give up Skype. This is a major problem and we are not the only ones to have. Transfer files via the Cloud is one thing, that is miffy at best in terms of privacy record of our files (temporary or not) rather than simply transfer, but this also? It must be fixed, at least.

  Help, please! It's very disturbing and constantly frustrating...

  Thank you.

  You can try to uninstall the latest 7.0 version and return to the previous 6.21.0.104 version. In this version the files are always transferred via the old way of P2P.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• Activation of Network Services does not Please HELP

  Hello
  
  I created a virtual machine with the Oracle_Developer_Day.ova file downloaded from oracle page to test the express tool.
  
  I m try announced a Web service reference, but the error:
  
  ORA-29273: HTTP request failed ORA-06512: at "SYS." UTL_HTTP", line 1130 ORA-24247: access denied by access control (ACL) of network list
  
  I did research and discover that oracle 11 g has no active network services so they must be allowed with the following script:
  
  DECLARE
  ACL_PATH VARCHAR2 (4000);
  ACL_ID RAW (16);
  BEGIN
  -Did the ACL currently assigned to ' *' and give APEX_030200
  -the privilege 'connect' if APEX_030200 does not yet have the privilege.
  SELECT ACLS IN ACL_PATH OF DBA_NETWORK_ACLS
  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
  -Before checking the privilege, to ensure that the ACL is valid
  -(for example, does not contain obsolete references to users ignored).
  -If so, we'll spend the following exception:
  --
  -ORA-44416: invalid ACL: 'ADMIN' main outstanding
  -ORA-06512: at "XDB". DBMS_XDBZ', line...
  --
  SELECT SYS_OP_R2O (extractValue (P.RES, ' / resources/XMLRef ')) IN ACL_ID
  OF XDB. XDB$ ACL A, PATH_VIEW P
  WHERE extractValue (P.RES, ' / resources/XMLRef "") = REF (A) AND
  EQUALS_PATH (P.RES, ACL_PATH) = 1;
  
  DBMS_XDBZ. ValidateACL (ACL_ID);
  IF DBMS_NETWORK_ACL_ADMIN. CHECK_PRIVILEGE (ACL_PATH, 'HR',
  'connect') IS ZERO THEN
  DBMS_NETWORK_ACL_ADMIN. ADD_PRIVILEGE (ACL_PATH,
  'HR', 'connect', TRUE);
  END IF;
  
  EXCEPTION
  -When no ACL has been attributed to ' *'.
  WHEN NO_DATA_FOUND THEN
  DBMS_NETWORK_ACL_ADMIN. CREATE_ACL ('power_users.xml',
  "ACL that allows users to be able to connect everywhere."
  'HR', 'connect', TRUE);
  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL('power_users.) XML ',' *');
  END;
  /
  COMMIT;
  
  Note: I have a workspace called HR and a user called HR.
  
  I run the script and everything works fine but when I try to add the Web service reference I get the same error.
  
  I Don t know what to do and my time to fixing this problem ends so please if someone can help me I would really appreciate it.
  
  Thanks in advance

  Hello

  Have you checked what version of APEX you run in your virtual machine? The script below would work for APEX_030200, but if you have a virtual running machine, it's probably APEX_040100 or APEX_040200. Just connect to your database and check what APEX schema is installed, then update your script accordingly and re-run.

  Kind regards
  Marc

• Services of Windows Vista 64 does not, please help!

  Hi thanks for reading.

  Noticed the other day my firewall is not running. A few weeks ago my AVG anti virus asked me if I wanted to move to a premium account for a 30 day trial and contained their own version of a firewall. He said that he would resort to Windows Firewall when finished.

  30 days passed, and he asked me to return to the original settings and the free version. I don't check if windows firewall started running.

  And so back when I noticed.

  What Ive tried: Panel > Security > windows firewall - says "windows firewall does not use recommended settings to help protect your computer" and there is a button for "update settings now" which when you click on it, I get the thing of glass hour for a few seconds and nothing happens.

  Run > services.msc > Windows Firewall - said State 'arrested' firewall service and when you are prompted to start, gives me error 6801

  Also noticed now that windows update and windows Defender will not be updated. Windows update search updates, but up quickly the code Error 80070426 and once again, to enforce > services > windows update/defender does not work.

  Then in flicking around, I have observed under the information system in 'computer' tab, he says: 'this copy of windows is not activated, click here to activate now' and Im thinking it is crazy! I have not had my PC very long, but I have activated vista right after that I installed it when buying. If I click on the link, and it says: 'a problem occurred when Windows tried to activate. Error code 0x80070426

  Edit: just thought of something that can help. Awhile back, before this all started, windows update prompted me one afternoon to install Service Pack 2 and I thought "why not?" Well, after a complete system failure and me to have my friend rally and he manages to get into the command prompt and run 2 types of checkdisk, I go back to my computer. Now, I don't think it off anything, or whatever it may be disabled, but something could have been damaged?

  IM puzzled and any help would be massively appreciated! If anyone needs more info, let me know!

  System information:

  Vista Home Premium 64-bit
  Intel Core2Duo E8400 2x3ghz
  8 GB RAM

  Kind regards

  A1. See...

  How TO do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  A2. Win7 is fabulous in my humble OPINION. You can format the partition and do a clean install of Win7, Yes.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My first while loop inside the PL/SQL block does not, please help

  Hello
  
  I'm new to PL/sql and struck PL SQL blocks, please help solve this problem.
  
  declare
  
  constant v_A number: = 10;
  constant number j: = 3;
  
  BEGIN
  
  WHILE j < v_A
  LOOP
  DBMS_OUTPUT. Put_line ('Hai');
  END LOOP;
  END;
  
  Please help as how to solve this problem.
  
  Thanks in advance.

  You cannot declare j as in 'permanent' If you want to increment its value. better go to another variable if you intentionally want constant j.

  Something like this:

  declare
  v_A number constant:=10 ;
  j number constant := 3 ;
  i number;
  BEGIN
  i := j;
  WHILE i < v_A
  LOOP
  i := i + 1;
  DBMS_OUTPUT.PUT_LINE('Hai');
  END LOOP;
  END;
  

  ... Vivek

  Published by: Vivek 21 Sep, 2010 02:54

• Homegroup does not, please help.

  Hello. I recently installed Windows 7 Home Premium on all my computers. The problem is, I chose the third option for this part of the installation and now I can't start my homegroup correctly. The error displayed "Windows cannot configure home group on this computer.

  

  I followed the steps of these sites and started tweaking the Services.msc
  http://support.Microsoft.com/kb/827328 http://www.SevenForums.com/Network-Sharing/17839-HomeGroup-functionality-Broken.html http://www.SevenForums.com/Network-Sharing/271796-changes-Advanced-Sharing-Settings-not-Saving.html after some progress, I was finally able to connect to the homegroup, but when I go in the homegroup settings, all the stuff that I would like to share my homegroup is not checked. I try to check everything up, but when I return to the same settings, everything is not checked again. I tried to go to the settings for sharing advanced and checked everything. Checked to see if he was saved and he did, but when I again homegroup settings, it simply refuses to save.

  Is it possible to fix this? More, is there any other easier and faster way to do this? I have 20 in the whole of the PC (cybercafé) and configuring each one with these complex and tiring steps will take a long time. Any help is appreciated, thanks.

  > Moreover, HomeGroup Troubleshooter did not help at all.

  You probably don't want use the homegroup in an internet café, because then all computers will see files from other computers.  When people go to an Internet café, they expect that their session is private and no one else can see.  Then, when they log off, they expect that you have the options set to clear their cache temp too.

  ---

  However, if you want to use the homegroup in a setting like this, you will probably need to open some ports in the firewall and make sure that IPv6 is enabled on your network.  See here: http://www.microsoft.com/en-us/download/details.aspx?id=10561

• Liquefy filter does not, please help!

  Hi friends,

  I use Photoshop CS4 every day all day, this morning my Liquify Filter has stopped working and I'm pulling my hair out trying to figure out why.  I already checked the obvious; I'm working on the correct layer and "show image" is checked.  I've already trashed preferences and restarted the computer and Photoshop.  I have attached a screenshot below (just in case I'm missing something).  The tool itself works (I can see the brush and move it), it is simply not to do something.  Nothing has changed since yesterday, there is no new software updates to install, I sat down just to start working and it did not work.  Can anyone help?  Please?  Very please?

  

  It seems that you could have selected to liquefy the reconstruction tool

  (left-hand tools)

  

• the code does not: Please help! (if else statement)

  Hello

  I'm new to the edge and I'm doing a simple animation to a chart where there are 2 buttons and clicking the buttons that it animates each line as a symbol using "play()".

  I want to add is a set of variables so that once you click on the buttons each 'greenclicked' and 'redclicked' variable is set to 1 (instead of 0). It then check out using an IF/ELSE to see if you have already clicked on the other button (value 1) and if so it plays the timeline of "revealing" symbol.

  I followed the JS error until the IF statement, and I think that its to do with the condition but my javascript knowledge is limited, so I'm not sure of the correct syntax.

  Here is the code I use:

  READY COMPOSITION

  sym.getComposition () .getStage () .setVariable ('greenclicked', "0");

  var i = sym.getComposition () .getStage () .getVariable ('greenclicked');

  Console.log ("greenclicked initialized at ="+ i);

  //

  sym.getComposition () .getStage () .setVariable ('redclicked', "0");

  var k = sym.getComposition () .getStage () .getVariable ('redclicked');

  Console.log ("redclicked initialized at ="+ k);

  WHEN YOU CLICK ON THE RED BUTTON

  sym.getSymbol("red_line").play ();

  //

  sym.getComposition () .getStage () .setVariable ('redclicked', 1);

  //

  var i = (sym.getComposition () .getStage () .getVariable ('greenclicked'));

  //

  If (greenclicked == 1) {}

  Console.log ("greenclicked =" + i + ""-triggered revealer ' ");

  sym.getSymbol("revealer").play ();

  } else {}

  Console.log ("red revealer button not triggered");

  };

  DURING THE CLICK ON GREEN BUTTON

  sym.getSymbol("green_line").play ();

  //

  sym.getComposition () .getStage () .setVariable ('greenclicked', 1);

  //

  var k = (sym.getComposition () .getStage () .getVariable ('redclicked'));

  //

  If (redclicked == 1) {}

  Console.log ("redclicked =" + k + ""-triggered revealer ' ");

  sym.getSymbol("revealer").play ();

  } else {}

  Console.log ("green revealer button not triggered");

  };

  ----------------------------------

  The error I get in the console is "[11:42:26.893] Javascript error in the handler! Type of event = element.

  Help with this appreciated

  Thank you

  Ash

  Hello

  You create 2 variables: i and k. So you can use both.

  WHEN YOU CLICK ON THE RED BUTTON

  var k = (sym.getComposition () .getStage () .getVariable ('redclicked'));

  If (k == 1) {...

  DURING THE CLICK ON GREEN BUTTON

  var i = (sym.getComposition () .getStage () .getVariable ('greenclicked'));

  If (I == 1) {...

  Now, console.log () works fine.

• Flash links does not please help ASAP

  I really need someone to help.  For some reason my flash links are no longer working.  Please check www.secretlyspoiled.com when you click on the links to the photo, he says no defined.  I've updated my .fla and the following errors.

  Scene = scene 1, layer = mov_contr image = 1, line 7 the class or interface 'gs.dataTransfer.XMLParser' could not be loaded.

  Scene = scene 1, layer = mov_contr, frame = 2, line 8 error opening include file gs/dataTransfer/xmlFunctions.as: file not found.
  Help, please!
  Thank you!

  Hey-

  You were ok search and replace, that's what we want to type in the search box and search all. Once you look for .xml - find the code in the first copy of the image and paste it here, I'll be able to see where it points and access roads. If you don't mind, send a friend request in FB and I will be able to guide you through it. If this is not the case, no worries we can do it this way as well.

  -Randy

• password does not work and I have reset it. Still does not please help. For some reason, I was instructed to update Flash player. I tried but the password was not accepted.  Reset the password to spawn a return to download Flash player past accepts no

  For some reason, I was instructed to update Flash player. I tried but the password was not accepted.

  Reset the password to spawn a return to download Flash player

  Password not accepted.

  WHAT should I do now?

  Hi mrse69610920,

  It is the OS, not Flash Player to ask for the password.  Please read the FAQ what userid & password I need to install Flash Player?

  --

  Maria

• VMotion does not, please help

  vmtion to another host and don't test works do not. validation error. "Can't access the virtual machine data store?

  Consult the data bank on host 2 and I do not see the virtual machine of Host1 vmdk files.

  I have a HP proliant DL380G running ESXi5.5 SD and two nested ESXi host...

  VMkernel installation on both hosts

  management network vmotion enabled

  in promiscuous mode.

  SCSI storage

  

  Looks like the VM Windows8.1host2 is stored on the store of data called datastore1 that seems to be a local host 192.168.1.71 data store, if what I say is correct, you will be unable to vMotion from host 192.168.1.70 this virtual machine, do not have access to the local data store of home 192.168.1.71. To be able to vMotion virtual computers between the hosts, the virtual machine must be stored on a shared data store that the two hosts has access.

• Design pen tool does not, please help the newbies!

  Hello

  I am very new in design, I'm working the pen tool, which has worked before when I was playing around with it on an earlier design, but I just downloaded the creative suite and when I use this design if I'm drawing a shape it creates black spots which first of all make it difficult to move to the next point Since it covers the image and then when I cut out the picture and paste in his party.

  You have a fill selected as a default, so when you create a form that's being filled with color. Before, you start to draw, the value none Fill and stroke a value as 1 point.

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I have already

  I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I already had a free annual subscription to cc through my new canon camera, but I installed for my mac already. No phone number to call, adobe contact to say amazon, what do I do?

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html