Skype starts not at all, showing offline icon in the taskbar

Hello everyone, I have a very annoying with Skype problem since I installed the IP camera on my Samsung phone, I tried to solve this problem for weeks, I finally got to Skype successfully opened by decommissioning in Skype 6.14, but when I go into my video settings, it shows the (completely uninstalled) ip as my selected webcam camera and blocks Skype soon after (1-3 seconds after the opening of the video settings). I tried to make calls, it also blocks my Skype, but I can instant message, I would go back to 6.18 Skype and make it work.

Thank you

Fixed! I had to reinstall the drivers and ip camera cards and to uninstall once more! It works fine now!

Tags: Skype

Similar Questions

  • Its icon on the taskbar is not displayed

    Hello!

    Just today my laptop does not show an icon on the taskbar sound as it usually does. If you see in the right corner it usually an icon of the right? but mine is gone?
    Can you help me how to get it back?

    Thank you

    Hey,.

    You can still hear sound on speakers? If so the only problem could be the disabled sound icon in the taskbar. Therefore, go to control Panel\All Control Panel Items\Notification icons of the region. Make sure that the volume icon is not disabled and it will always be displayed in the taskbar.

    If you can t hear you should check the Device Manager. The sound card is listed in the Device Manager?
    If this isn't the case, you must reinstall the audio driver no doubt. You can download the driver from his most recent official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com

  • When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

    Original title: Internet wireless connection

    I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

    Thank you

    [Transferred from Internet Explorer]

    Roll up your sleeves & cross your fingers...

    ACTIONS:

    [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

    1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

    3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

    4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

    Note: Good for IE9, too.

    4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

    4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

    5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

    6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

    Note => for best results, check the option Remove personal settings .

    7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

    8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

    9 restart once again & test.

    10. in response to this post with a status report.

    ==================================================
    [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

    [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

    [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  • Satellite P300 - 13 M start not at all

    Hello everyone,

    My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

    When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

    This means the end of my laptop?

    Please help me as fast as you guys can't because it's my only laptop work.

    Thank you very much

    PS If you want specs, then I can't give you their. I don't know the specs by heart.

    > This means the end of my laptop?

    No doubt :(

    But try this: remove the battery and ac adapter
    Leave the laptop disconnected for a longer period of time (a few hours)
    Then press the power button / stop along 30 sec.
    Then connect the battery and the AC adapter and try to turn on the unit.

  • How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    Use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    Go to method 3.

    3. for the network icon.

    (B) to activate the icon network - Enable_Network.reg< click="" to="">

    * Don't forget to restart to complete the procedure. ***

  • PC will not id printer shows offline

    PC emits a printer shows offline have replaced the printer cable

    Please read this post then provide some details.  What printer model? What operating system?  There the error messages on the computer screen or the printer?

    Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  • Unity Mode - icons in the taskbar on the host do not work as expected for some applications

    In Unity mode, the icons in the taskbar on the host computer do not work as expected for some applications. The following problems may occur:

    1. several icons for a single application.

    2 aero Peek does not work if the application is reduced.

    3 icon moves to the end of the task bar after restoration of the collapsed state.

    These problems make it difficult to work in Unity mode. Here are some details about my setup:

    VMware Workstations Version: 7.0.1 build 227600

    Host: Windows 7 64-bit (all updates applied)

    Client: Windows XP (all updates applied)

    Steps on how to reproduce the issue n ° 1:

    1. start the mode of the unit for Windows XP clients.

    2. launch Visual Studio 2003 on the start menu of the unit.

    3. minimize and optimize Visual Studio 2003. Finally, you should see several icons, each with a different air look.

    When this happens, you can maximize is more than a simple click (as there are a stacked icons). Sometimes, only one of the icons to display Visual Studio 2003 (when testing this now, the other icon displays a portion of the Office of comments). If multiple copies of Visual Studio 2003 are launched, it is difficult to know who is who.

    Procedure reproduce problem 2:

    1. start the mode of the unit for Windows XP clients.

    2. launch Visual Studio 2003 on the start menu of the unit.

    3 minimize Visual Studio 2003.

    4. place the cursor on the icon. You should see the icon in Aero Peek (similar to the Aero Peek look when you use Microsoft Windows XP Mode).

    Aero Peek works great for other applications reduced, such as Windows Explorer.

    Steps on how to reproduce the issue n ° 3:

    1. start the mode of the unit for Windows XP clients.

    2. launch Visual Studio 2003 on the start menu of the unit.

    3. start Windows Explorer in the start menu of the unit.

    4 to minimize Visual Studio 2003.

    5 optimize Visual Studio 2003. The icon disappears briefly and then displayed in a different location (to the right of the icon in Windows Explorer).

    I guess that these issues will eventually with the similar Microsoft products such as SQL Server Management Studio, newer versions of Visual Studio, Microsoft Office (I guess just--I have not tried other programs).

    These questions, it is very difficult to use Visual Studio 2003 in Unity Mode, which is the main application, I need to use the virtual machine. I would love to see these issue fixed.

    Kind regards

    Tim

    Hi Tim, this behavior all boils down to the fact that when you reduce the VS, is not to minimize as windows normally do. VS hides the main window, and then returns to the window in the reduced state.  When the host sees the window becomes hidden, she removes the button from the taskbar to the window of the unit; There is no way of knowing that the window will be re-shown again later.  The thumbnail Aero does not work for the reduced window because the host never saw this window in its normal state, so that the host knows not what are the contents of the window.

    The good news is that you can work around the button behavior of taskbar in Workstation 7.1 by pinning the window VS. In this way, the taskbar button will always be there no matter how many times the window of the unit is shown/hidden. It will not solve the problem of thumb nail, however.

  • On the takbar at the time wherever I have only a few visible icons when I go to customize, I find all these other icons of the past. Is any way to remove them?

    Original title: taskbar

    I have XP Pro 32 bit. On the takbar at the time wherever I have only a few visible icons when I go to customize, I find all these other icons of the past. Is any way to remove them?
    Click taskbar, go into customize past points. Is any way to remove them?

    Gene

    http://support.Microsoft.com/kb/283084

    It is clear in front of the notifications area elements

  • Installation of WIN 7 update 12/11/2014 destroyed Dsktop layout and remove all icons from the taskbar except one - major update error

    I just installed 22 updates, the previous update is maybe a week... and when the machine rebooted WIN 7, all my icons to the taskbar disappeared, the wallpaper was different and all but some desktop shortcuts have been removed. It is a disaster.

    Sounds like your user profile has become corrupted:

    Corrupt user profile:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  • I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b &amp; w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is - it really close the

    I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b & w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is this really close the program? (It also changes an image n & b).

    -> Output file, or by clicking on the red X in the upper right, should work.

    CTRL-Q should work unless there is a Windows keyboard command that replaces it.

  • Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

    Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

    Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

  • How to restore the printer icon in the taskbar

    I want to restore my printer icon in the taskbar. I spent to the properties of the taskbar and selected icons to show and which to hide, but it does not evolve. (I asked to hide all icons appear when they are idle).

    Printer is shown as 'past', but I clicked to display, and it doesn't.
    All that I have done differently these last time is to switch to Google Chrome - help!

    Hi Daisylew,

    Thanks for posting in the Microsoft Communities. The problem description, I understand that you want to restore the printer icon in the taskbar. Provide the following information for the better understanding of the issue:

    ·         What version of the operating system is installed on the computer?

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    (a) click Start. In the start search box, type printer .

    (b) when the printer appears in the menu, right-click.

    (c) click on PIN to the taskbar.

    Method 2: Do a System Restore and check.

    Let us know if you need more assistance.

    Thank you.

  • How to add sounds to the light icons in the taskbar when events happening?

    Well, my question is maybe very simple, I hope I can get help here, I ve been wondering how to make the icons on the taskbar sound when something happens for example when you receive a message 'Skype', the light of the task bar, but in my case they do not all sound the answer to that might be in the Skype settings, but, I want is doing the actual windows to make a sound to tell me something that is happening there, and of course I can chose the sound of that.

    the example of "Skype" might not be the best here, lets say another software, when is reduced and something happens, call your attention to the icon in the taskbar with start to glow, but sometimes I'm in another place, or looking for another way I could not miss this event in this software need my immediately attention with sound, I could turn on my loud speakers so I will be heard.

    Thank you

    Hello Derwyn,

    Thank you for your response.

    I appreciate your time and your concern.

    Unfortunately, the desired Windows sound is not included in the Windows sound scheme.

    However, in the article in the previous post on changing the sounds of the computer, you can see under the heading 'Windows Explorer' under the window 'events of the program'inside'sound'. You can find the other sounds of Windows Explorer as blocked pop-up navigation block, empty, trash, move menu items and so on.

    Thank you

  • Pavilion P6207c: Hp mediasmart empty icon in the taskbar and icon missing in hp dock

    I restarted my computer and my HP Mediasmart icon in the taskbar is empty, when I click on it windows says it can't open because that its been moved, renamed or deleted. But the show task up if I right click on it like watch a dvd, listen to mp3's, see, modify or download photos, see modify or download videos. (all links in the task too much work) Then trying to understand the problem, that I thought I could basically icon/link to pull a bit of my HP Dock in the taskbar hoping it would be duplicate and appear in the taskbar. But to the contrary after leaving the dock and release the mouse button, it disappeared. How do I trouble the white icon and pick up the other icon in the dock? I pulled the HP Mediasmart icon directory .exe file and it is stuck in the dock, but it works the same. The original had an arrow below and if I clicked it, a drop-down list with all tasks would come down. With that I pulled from the directory that I have to click on it and then a new bar appears with different icons for each task.

    Well I solved the problem with the taskbar, I downloaded the hp mediasmart smartmenu, went into the directory and PIN to the taskbar. But I still can't one of the docking station will work as before.

    @enimen2 ,

    Hi and thanks again for the rear display.  If you can do it is no longer a restoration following options is a complete recovery of the system, return to the original configuration.  You want to back up all your information before you do.  Once it starts it will wipe your system clean.

    Here is a link that will help you to recovery.

    HP computers - performing a recovery of HP (Windows 8) system

    Let me know how things are going.

    Thanks again for posting and have a great day.

  • How can I add the weather icon to the taskbar to be next to the time?

    Try as I might, I can't figure this out.  I would like to add the weather icon to the taskbar.  I want it to be next to the time, so it is always displayed.  How can I do this?  I also want to remove some of the icons that appear in the part of the notification of the taskbar.  Yet once, I can't do it.

    To add items to the taskbar in Windows XP, do one click right, choose Properties, select "Show quick launch", then OK. Now you can add existing shortcuts to the quick launch area (which is pretty much a location allows you to customize your own shortcuts), or you can right click on the quick launch are to open its 'file', then create new shortcuts to here (right click-> new-> shortcut).

    To remove the part of the taskbar notification icons: If you are indeed referring to the notification area near the clock, try right-clicking on the icon and look for an option to delete/remove/disable. Not all icons will have such an option. Additional details on the notification in Windows XP bar can be found here. If you are actually referring to quick launch (next), and then activate it as I've described in the paragraph above, then you should be able with the right button and then remove them.

Maybe you are looking for

  • 5200 801 and Windows Vista

    I do not know how to test Windows Vista, let alone on a 5200-801 satellite, but I have some problems with the Toshiba Utilities. Including non of them work. The current problems, none of the function buttons work (IE monitor, shortened brightness wir

  • How can I get my email attachments to open in Word instead of Word Perfect

    When I want to open instead of save a downloaded attachment, WordPerfect automatically starts. I want to open in Word instead. How can I re - define who? This has happened Each time Firefox opened is always

  • Re: Computer laptop Toshiba Satellite L350 - logging on problem

    Put running the laptop and get a blank black screen with Ctrl-alt-del to restart. Press ctrl-alt-delete. Get the Toshiba screen and then back to a blank black screen with Ctrl-alt-del to restart! Need help please, I am not very friendly to PC/Laptop!

  • BTS of CIV 4 and Windows 7/64 bit home edition

    Everything starts fine, but when I actually play the game, it's slow as molasses January.It loads fast but slow times and I tried various bugs, but nothing seems to work. My system is i5/750, asus p7p55d, 4 gig of ram, xfx 9600gt 512 MB. Someone at -

  • Windows Update KB977165 published 3-2

    The above update keeps coming back every day even if I install it every day.  I can't uninstall it.  How can I get this update to smoke all the days to come?